2 Jan
1998
2 Jan
'98
3:47 p.m.
Most of the tandy printers where serial. Does the DMP have a DIN cable, a
D cable or a Centronics cable. Most had a serial DIN cable and you would
have to make a custom cable that went from a PC"s serial port to the DIN on
the printer. If it's a D connector you should be able to use a straight
through serial cable. Getting it to talk, will be the next interesting
part. Im not sure how they communicated, but you might be able to get at
least text out of it. Let me know how it comes out.
-----Original Message-----
From: Eric Deschamps <erdesch(a)HEMPSEED.COM>
To: Multiple recipients of list COCO <COCO(a)PUCC.BITNET>
Date: Friday, January 02, 1998 4:45 PM
Subject: Radio Shack TRS-80 DMP 100 Printer info needed.
I was wondering if I can connect my DMP-100 to a PC
through the parallel
port in the back and if I need a special cable ? According to the manual,
this port was made for TRS-80 only. It doesn't talk about PC in the manual.
If someone was able to connect it to a PC, please let me know how and which
driver did you use in Windows?
I was wondering if someone has a spare cable to connect this printer to a
TRS-80 COCO II or III (using the DIN connector) to giveaway ? If not, which
part number
do I need to order from Radio Shack ?
Many thanks!!!