30 May
2011
30 May
'11
11:21 p.m.
Geoffrey Reed wrote:
On 5/28/11 9:08 AM, "John Robertson"
<pinball at telus.net> wrote:
Calibration info appears in manual #981-0001-001 REV A of the Unipak 2
Geoffrey Reed wrote:
I'm on that list, but only found the operation manual.
Looking for the Calibration/Service manual for
the Unipak 2B unit, it has
schematics in it and the calibration procedures. Since some of the adapters
are unobtanium, with the service/cal manual it should be possible to reverse
engineer some of the adapters :)
There is a Data I/O mail list with support files...
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Data_IO_EPROM/
John :-#)#
from Sept 84, Section 4 -
Maintenance/Troubleshooting/Calibration.
Need a copy emailed? Its 7mb in size...pulled from my TTL Data I/O
(section down for the moment) archive site, mirrors up soon.
John :-#)#
--
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
www.flippers.com
"Old pinballers never die, they just flip out"