23 Oct
2002
23 Oct
'02
9:21 a.m.
You might try any of the HP1000 support companies such as crisis
computer, MBC Inc, etc.
Some of these cables are very common, and they might actually be
affordable. In some cases these companies might really need some I/O
board you have no use for, and swap the cable you need for
the part they need.
Its worth a try.
Glen Slick wrote:
I think the necessary connector is a dual row 48
contact 0.156"
spacing card edge connector. I'll have to see if I can find a
source. I think some place like http://www.edac.net would let you
specify such a connector, but actually buying some in low quantities
might be a different story.
-Glen
From: "Will Jennings"
<xds_sigma7(a)hotmail.com>
Reply-To: cctalk(a)classiccmp.org
To: cctalk(a)classiccmp.org
Subject: Re: HP 2647A / F Terminal & HP1000
Date: Wed, 23 Oct 2002 10:52:43 -0600
Closest I ever came to cables was the hacked-off ends as gold scrap : (
Will J
_________________________________________________________________
Surf the Web without missing calls! Get MSN Broadband.
http://resourcecenter.msn.com/access/plans/freeactivation.asp