1 Mar
2005
1 Mar
'05
4:02 p.m.
ok, two questions. In at least the docs I have (11/45 service manual, user
manual, and handbook), I can't find a clear description of how to toggle a
program into memory.
I'm assuming that when you enter an address in the front panel switches and
hit "load addrs", that the data lights aren't supposed to automatically
show
the data value at that location. I'm assuming you must hit "exam" first. Is
this correct? If not, I'd be autoincrementing and seeing the next data
Yes
value. Can someone give me a good example of just how
to enter two or three
Actually, the 11/45 gets this right (and the appropriate bit of
logic/microcode is not trivial). If you EXAM, then DEP, you'll deposit at
the same location (ditto for DEP, then EXAM). It increments the address
between successive DEPs or EXAMs (but not between a DEP and an EXAM or
vice versa).
The easiest way to think of it (and this is what the machine actually
does) is that it increments the address before each EXAM or DEP in a
sequence of identical operations _apart from the first one_.
words starting at a given location? I think I can
figure this out, but I'd
rather be sure so I don't skip over something that isn't working correctly.
But you don't need to worry about that. Just do this :
Stick the address on the switchs, hit LOAD ADDR
Stick the first word of your program on the switches, hit DEP
Stick the next word on the switches, DEP again
and so on.
-tony