19 Mar
2009
19 Mar
'09
8:12 a.m.
Have you asked at Vetco? From memory I think I know what connector you're talking
about and I'm pretty sure I've seen it there. -- Ian
________________________________________
From: cctalk-bounces at classiccmp.org [cctalk-bounces at classiccmp.org] On Behalf Of
Josh Dersch [derschjo at mail.msu.edu]
Sent: Thursday, March 19, 2009 2:20 AM
To: On-Topic and Off-Topic Posts
Subject: Re: Looking for DEC QVSS (M7602) manual or dip-settings
Ah, never mind -- was just taking a closer look at the board and found a
tiny tiny coax video connector on both the QVSS board and the bulkhead.
Looks like this must carry the video signal. Not sure what kind of
connector that is... anyone know? (I can provide pictures if necessary...)
Thanks,
Josh
Josh Dersch wrote:
Got myself a QVSS video board that I'd like to run
in my MicroVAX II,
but either it's configured incorrectly or it doesn't work. Anyone
have a manual scanned or a list of the dip-switch settings for this?
I can't find any useful info on the 'net.
Symptoms are that the Keyboard responds (beeps at power up, I can hear
the keyclick when I type, and the VAX seems to be responding to input)
but I get no video or sync on the monitor (a VR262). Monitor,
keyboard, and cable all work fine on my MicroVAX 2000, so something
must be up with the QVSS.
Thanks,
Josh