8 Jan
2015
8 Jan
'15
1:05 p.m.
From: Al Kossow <aek at bitsavers.org>
To: cctech at classiccmp.org
Subject: Re: Broken H724 power supply from PDP-8/e
On 1/7/15 6:24 PM, Michael Thompson wrote:
Thanks Al and Marco.
I saw Q207 when I inspected the power supply and wondered what that giant
diode was for. I also saw it in the schematic and was surprised to see that
the diode installed backwards. Now I see that it is an SCR, not a diode.
R29 is easy to get to, so I will try raising the crowbar voltage a just
little. It is also possible that the regulation of the +5V is not working
correctly and the crowbar should be firing.
--
Michael Thompson
The H724 power supply in my PDP-8/e works OK for
about 5 seconds and then
the +5V output goes to about 3.0V. If I leave it on for a few more
seconds
it will blow the 20A fuse for the +5V output.
sounds like something is firing the crowbar (Q207)