Need help with a 11/23+ and a M8061 RL02 card.

8 Jan 2013

...
 Zane H. Healy wrote: 
...
  At 10:26 PM
-0800 1/7/13, Jerry Wright wrote: 
  The system has

 M8189 cpu
 M8067 memory 256k
 M8029 RX02
 M8061 RL02
 M8639 HD controller

 Everything works except the M8061. Jumpers are set to Factory default.
 I did add the Q22 jumper just in case.  There is  always a chance its 
 a bad
 controller card.

 The drive will come on line but that's about it. If I try to boot 
 from it. i get
 an

 error, 'no controller' . If its running under RT11, booted off the 
 RX02 , I  get

 'cant read directory '

 Any words of wisdom out there

 Thanks,  Jerry 

 What are the CSR's for the RX02 controllers?  Any chance you have two 
 set the same?  I assume you have a drive # plug in the front of the 
 RL02 drive? 
Also, do you have another RL02 drive to test as well?

Since you have an RQDX1 or RQDX2, you may be using a BA23 box.
Otherwise, how have you connected your hard drive?  And can you use
your hard drive on the M8639 controller?

Even with a BA23, since the M8029 is in the third slot, there should not
be a problem with the M8061, especially if the M8639 is working.

I was going to ask about an M9047 bus grant card, but the configuration
you have does not require one.  Since the M8029 drive is working, the
two quad cards below the M8029 should be OK even in a BA23 box.

Jerome Fine

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

Need help with a 11/23+ and a M8061 RL02 card.