Vector Graphic S100 Identification Request

Greetings, Ok, I've got a Vector Graphic S100 chassis full of cards and another chassis with an 8" hard disk. I picked up this machine last fall from Jeff Kaneko. Thanks Jeff! I thought since I've had such good luck with the Northstar that I'd start tackling the VG. Ok, here's what I know about it. The system chassis says just Vector on the front, has a keyswitch and a reset button. It also has a 5 1/4" floppy drive in the front. The Part Number on the back says 9007-0018 while the Serial Number says 1003. A similar sticker on the inside bottom next to the floppy drive says PN 5034-0016 SN 10014. The system has a Bitstreamer II card, which I'm assuming goes to something like a tape drive (which I do not have), 4 Vector 64k RAM cards, a Vector CPU card with a Z80B, which has a serial console cable going to a DB25 on the back of the unit. The unit also has three serial cards going to five DB25s on the back, each having a label that says "Vector Mindless Terminal Only". The CPU card says ZCB on it and has a copyright of 1979. What can anyone tell me about this system? What model is it? Did it run CP/M or M/PM or both? Anyone have bootdisks for this thing? On a side note, the cables to the hard disk have been snipped but there's enough on either side to know what they're supposed to be. Obviously, when I reconnect those there's a possibility that it will boot off the hard disk. ??? (Maybe that's an assumption) Thanks... Anthony Clifton PS: I'm sending this directly to you, Don, as well to see if you have a bootdisk for it. Thanks!