Serial Connection for UVax II with H8571-B

Hey guys and gals, I have tried and failed to get a successful connection between my uvax II and a pc rs-232 serial port. The H8751-B didn't seem to work, so I pulled it off and wired my own MMJ-DB9 connector. I have tested the MMJ cable, and it works flawlessly. For my connectors I have followed "The Cable" documentation at http://www.mcmanis.com/chuck/computers/vaxen/panels.htm (chucks house of vax), under "The MicroVAX II" section but it hasn't helped. I have tested the MMJ-DB9 connection from my uvax III consoles and from the microvax 3100 and it works fine, so I think the PC side is working correctly. The MMJ-DB9 on the pc side is DB-9 Pin Color Purpose 1 Pin 4 & 6 2 Yellow Transmit 3 Black Receive 4 Pin 1 & 6 5 Red Signal GND 6 Pin 1 & 4 7 N/A 8 N/A 9 N/A When I toned out the H8571-B connector and this is what it toned out to (using a straight MMJ cable out of the connector: H8571-B Pinout DB-9 Pin Color Purpose 1 N/A 2 Black Transmit (Tx+) 3 Yellow Receive (Rx+) 4 White DSR 5 N/A 6 Blue DTR 7 Red Transmit Ground (Tx-) 8 Pin 8 9 Pin 9 Any idea what pinouts I should use for the H8671-B -> PC connector cable should be? This situation is driving me nuts. Kevin