24 Oct
2002
24 Oct
'02
2:15 p.m.
I checked with one of the HP1000 dealers on the net and was quoted $100 for
a 12966A serial cable. I guess that would be either a 12966-60004 or a
12966-60006 for standard 25-pin terminal / modem cables.
Now I'm glad I recently picked up an unused 12566C off of eBay complete with
the 48-pin connector for just over $20 delivered. When that arrives I
should be able to use that connector to build a serial cable for the 12966A.
Is there a scan of the 12966A manual (12966-90001) on the net somewhere?
I've found a large selection of other HP 1000 manuals, but not one for the
12966A. I did google up a 2 year old message from Frank on this list with
card edge signal descriptions so I at least have that.
-Glen
From: "Glen Slick"
<glenslick(a)hotmail.com>
Reply-To: cctalk(a)classiccmp.org
To: cctalk(a)classiccmp.org
Subject: Re: HP1000 Card Edge Connectors
Date: Wed, 23 Oct 2002 11:33:05 -0700
I think the necessary connector is a dual row 48 contact 0.156" spacing
card edge connector. I'll have to see if I can find a source. I think
some place like http://www.edac.net would let you specify such a connector,
but actually buying some in low quantities might be a different story.
-Glen
>From: "Will Jennings" <xds_sigma7(a)hotmail.com>
>Reply-To: cctalk(a)classiccmp.org
>To: cctalk(a)classiccmp.org
>Subject: Re: HP 2647A / F Terminal & HP1000
>Date: Wed, 23 Oct 2002 10:52:43 -0600
>
>Closest I ever came to cables was the hacked-off ends as gold scrap : (
>
>Will J
_________________________________________________________________
Surf the Web without missing calls!Ā Get MSN Broadband.
http://resourcecenter.msn.com/access/plans/freeactivation.asp