3 Oct
2013
3 Oct
'13
6:06 a.m.
Ethan Dicks wrote:
On Wed, Oct 2, 2013 at 2:39 AM, Holm Tiffe <holm at
freibergnet.de> wrote:
I've looked at the schematics from the F880 Drive, it features a mains
50i/60 cycles transformer like all the models you can find schematics for.
In the TSZ07 thre is none, there is only the Switchings PSU that provides
all the needed Voltages.
Kind Regards,
Holm
--
Technik Service u. Handel Tiffe, www.tsht.de, Holm Tiffe,
Freiberger Stra?e 42, 09600 Obersch?na, USt-Id: DE253710583
www.tsht.de, info at tsht.de, Fax +49 3731 74200, Mobil: 0172 8790 741
Al Kossow wrote:
> On 10/1/13 9:42 AM, Sander Reiche wrote:
> >F880 or M990?
> >
> M995
I thought it was the F880, but that is in no way certain knowledge.
Besides of the Manual another question:
The M995S is often specified as 800/1600/6250BPI capable on the net,
so far as I know the TSZ07 supports 1600/3200/6250 BPI.
I have a TSZ07. AFAIK, it does not support 800 bpi. I have no
manuals for it. I got it locally from Uni surplus along with the
Alpha it was attached to for less than it costs to ship a TSZ07
in the first place. It came with no manuals.
*Perhaps* once the issue of models numbers is resolved, one
could experiment with Cipher firmware and add 800 bpi, but
that's only a possibility. One needs the right Cipher firmware,
naturally, but the were a lot of Cipher drives out there. If it
hasn't yet been captured, with a little digging it might be.
-ethan