21 Apr
2017
21 Apr
'17
7:13 p.m.
On 4/21/2017 6:55 PM, allison wrote:
On 04/21/2017 09:34 PM, Don North via cctalk wrote:
TU58 is really not much useful for running any real DEC OS other than XXDP, to
run diagnostics; that is what I use it for on my 34 and 44 (real hardware). I
don't use TU58 at all under SIMH (does not make much sense).
RT-11SJ works running from TU58, but just barely, and it is not really usable.
RT11 is barely usable once you move up to a dual drive RX02.
test[991] pdp11
PDP-11 simulator V4.0-0 Beta git commit id: 17903827
sim> set tdc enable
sim> att tdc0 11xxdp.dsk
TDC: buffering file in memory
sim> boot tdc0
BOOTING UP XXDP-XM EXTENDED MONITOR
XXDP-XM EXTENDED MONITOR - XXDP V2.5
REVISION: F0
BOOTED FROM DD0
124KW OF MEMORY
NON-UNIBUS SYSTEM
RESTART ADDRESS: 152000
TYPE "H" FOR HELP !
.DIR
ENTRY# FILNAM.EXT DATE LENGTH START VERSION
1 XXDPSM.SYS 1-MAR-89 29 000047 E.0
2 XXDPXM.SYS 1-MAR-89 39 000104 F.0
3 DRSSM .SYS 1-MAR-89 24 000153 G.2
4 DRSXM .SYS 1-MAR-89 48 000203 C.0
5 DATE .SYS 1-MAR-89 2 000263 B.0
6 DB .SYS 1-MAR-89 2 000265 C.0
7 DD .SYS 1-MAR-89 3 000267 D.0
8 DIR .SYS 1-MAR-89 7 000272 D.0
9 DL .SYS 1-MAR-89 4 000301 D.0
10 DM .SYS 1-MAR-89 4 000305 C.0
11 DR .SYS 1-MAR-89 3 000311 C.0
12 DU .SYS 1-MAR-89 4 000314 E.0
13 DUSZ .SYS 1-MAR-89 2 000320 C.0
14 DY .SYS 1-MAR-89 3 000322 D.0
15 LP .SYS 1-MAR-89 1 000325 B.0
16 MM .SYS 1-MAR-89 3 000326 C.0
17 MS .SYS 1-MAR-89 4 000331 C.0
18 MU .SYS 1-MAR-89 4 000335 E.0
19 HELP .TXT 1-MAR-89 29 000341
20 PATCH .BIC 1-MAR-89 31 000376
21 SETUP .BIC 1-MAR-89 27 000435
22 UPDAT .BIC 1-MAR-89 29 000470
23 XTECO .BIC 1-MAR-89 26 000525
24 FLOAT .BIN 1-MAR-89 18 000557
FREE BLOCKS: 126
.
On 4/21/2017 4:25 PM, Brian L. Stuart via cctalk
wrote:
I remember TDC was DECcassette (TU-60).
The boot for RT-11 would be BOOT DD: the tape image should be built
with a DD driver or DDX for RT11XM.
Least that how it works for my physical PDP-11/23 RT11 system.
Generally all the files that should be on
a RT11 floppy needs to be on the tape.
For other OSs it first has to fit on the device and have a suitable
driver for TU58.
Allison
I've seen suggestion that TU-58s are emulated
in simh on
PDP-11s. However, I'm not seeing it in a show dev and my
google-fu is failing me to find any info on how to use it. Any
pointers on how to boot from a TU-58 image?
TIA,
BLS
Using simh v4.0 from github, in the PDP11 simh ini file:
*set tdc enable**
**attach tdc0 tu58.dsk*
then assuming tu58.dsk is a bootable image:
*boot tdc0*
Only two units 0,1 are supported (just like a real dual drive) and the
images must be 262,144 bytes in size (like a real tu58 cartridge).