9 Jun
2002
9 Jun
'02
9:32 a.m.
All but one of my 2940/3940 devices are broken so I haven't tried this with
them, but it works fine with the Wide SCSI controllers I am using. I have one
cheapie from SIIG with both narrow and wide connectors on the board and it
works fine with a mix of narrow, wide, and SCA drives, which have wide
adapters on them, BTW.
Dick
----- Original Message -----
From: "Bob Lafleur" <bob_lafleur(a)technologist.com>
To: <cctalk(a)classiccmp.org>
Sent: Sunday, June 09, 2002 12:30 PM
Subject: RE: 50 & 68 pin SCSI-2
Out of
curiosity, has anyone tried running both SCSI-3 and SCSI-2
devices on an Adaptec
2940UW card, using separate 50 & 68 pin cables?
I'd like to do that, but then I'd have another big ribbon cable taking
up room in my PC here.
I've run a SCSI-3 hard drive on the wide internal connector, and SCSI-2
CD-ROM and tape drive on the internal 50-pin connector of the 2940UW.
Works fine. When you're doing that though, you can't use the external
connector on tbe back. With a 2940UW-PRO, you can use all 3 connectors
at once, which I have also done.
- Bob