That VAXStation4000vlc 3W3 video connector

-----Original Message----- From: cctech <cctech-bounces at classiccmp.org> On Behalf Of Jonathan Stone via cctech Sent: 04 May 2021 01:31 To: General Discussion: On-Topic Posts <cctech at classiccmp.org>; Adam Thornton <athornton at gmail.com> Subject: Re: That VAXStation4000vlc 3W3 video connector You need a video cable with a 3W3 connector on one end. Original was likely a DEC BC29G-10. That, plus 5BNC-to-VGA cables, and 3 F/F BNC barrels, will work with a multisync monitor that handles sync-on-green. I just went through this with several DECstations, where the Turbochannel graphics options have the same 3W3 connector. On Monday, May 3, 2021, 04:23:05 PM PDT, Adam Thornton via cctech <cctech at classiccmp.org> wrote: I assume it would be way too much to hope that HD BNC would fit it? Does anyone have a pointer to the actual physical dimensions of the itty-bitty BNC- ish connector in the video port of the VAXStation4000vlc? If I can get red, green, and blue out (assuming since there are only 3 connectors it's sync-on-green) I can put together a sync splitter and turn it into VGA. I have at least one decent multisync VGA monitor still, although none with the RGB BNC inputs. Adam