17 May
2009
17 May
'09
9:47 p.m.
Jay West wrote:
Josh wrote....
Just tried them, those seem to be correct for the 9905 as well.
Huzzah! When you get a chance, if you could scan the quick reference
I'd really appreciate it. I need the diagnostic codes to change
internal drive settings... this drive used to be configured for the SCSI
interface and I need to reconfig it so the Pertec interface works properly.
Thanks again,
Josh
Maybe... it might be close enough -- what's
the diagnostic program #
for setting drive options listed in the quick reference? I can try
it on my 9905 and see if it lets me set parameters, if it does then
it may be what I need...
Program # 09 select high speed mode
Program # 10 select low speed mode
Program #27 select 800bpi
Program #28 select 1600bpi
Program #29 select 3200bpi (error code 98 means 3200 not available)
Program #30 rewind tape
Program #40 display prom rev No's
Program #11 Set 'n'
Program #18 write 'n' short records stop/start mode
See if those are close....
Jay