from the RX02 to the 25 pins on the plug, which can then be used to map

Thanks chris...its a 37 pin on the vt278 end. On Wed, Feb 19, 2020, 7:10 AM Chris Zach via cctech <cctech at classiccmp.org> wrote: > Hm. I have the bulkhead 25 pin to 40 pin interface thing from an RX02 in > a box, I'm not using it as I am going from the pdp11's RX01 straight to > the drive's controller. That should give you the pinout, want to borrow it? > > C > > On 2/18/2020 10:02 PM, Bill Degnan via cctech wrote: >> Looking for a DECMATE (VT-278 model) RX278 Floppy Drive Interface > Connector >> cable, part number is RC26N-2L It's a 37 male-25 pin male cable. >> >> Here is photo I took of one (not mine) >> > https://www.vintagecomputer.net/digital/DECmate/DECMATE_VT278_PortsDriveCab… >> >> I have the pinouts for the 37-pin end but not the 25-pin end. If no one >> has a cable I can do a continuity test of the cable next time I have > access >> one, but it's not easily available. >> >> I am located near Philadelphia. >> >> Thanks >> >> Bill >> >