HP mouse and DEC coiled cable and wanted items to trade or buy.

Here's the two items I'm peddling off to trade for one or two ADB M-M cables. Shipping is free because these two items is rather light. If any of you want either one or both let me know. HP mouse, 46060A. Condition: light scuff marks, bit bent to one of two latches but *no* damage on that jack end, still can latch. Only two items, missing locking ring and has non-original HP mouse ball. Does roll freely when moved around viewed through plexglas. I know the spring loaded is pushing ball against two rollers. Do not have HP machine to test this with. ASIS, either try or for parts to fix other HP mouse. Digital Equipment Corporation, coiled cable w/ jacks part number: 17-02643-03, assembled in USA on that sticker. Still heat-sealed bag is well-handled but the cable itself is still new and undamaged. Also inside that still-sealed bag is piece of folded paper, appears to be diagram of a back of a keyboard w/ that cable. Hard to tell because I'm viewing that shadow from paper wrong side.. Also I have Compaq replacement motherboard for LTE 386s/20 still unopened in it's packaging like new and worn original box it came in. The bios version is -003 means it does support dual 8MB modules. This is rare few notebooks to have cache the system performance tests proves this. Yes, I looked through that anti-static package on that bios version with strong flashlight and lope and looked at quick reference. By the way, one used 8MB card for that LTE 386s/20, perfect match to go with this replacement LTE 386s/20 motherboard, it works in my former LTE 386s/20 bios -002 but according to quick ref says bios -003 is required to handle two 8MB modules. This card also work in all LTE Lite series but not LTE Lite4 series. Wanted: For this compaq parts or to buy, I'm looking for Mac logic board or stripped of down of its drives mac w/ motherboard and vram still in it. Interest of items I'm looking for: LC475, Quadra 605. In these two models, If that pair of vram sticks is missing it won't work and I do not have two vram sticks on hand.

Or, HPV 1MB video card PDS for 7100 and 8100. Or, LC PDS ethernet daughterboard for LC, II, III and III+, performa 465/466. TP (jack type) but I could accept coax interface (BNC type). Looking to buy for my use: If you have crashed fireball ST scsi 3.2GB but good circuit board, I need it, I pay both shipping and small cost for it. I suggest ditch the HD pack, just that circuit board to save on shipping and for data security if that pack turned out good. Cannot be 1.6GB, 2.1GB, 4.8GB or 6.4GB due to programming on that circuit board is not same as 3.2GB. Only requirement these defectives should spin up and whack noisily it's heads silly, signifying disc pack is gone. The bad logic boards makes HD totally dead, no spin, no seeks. That is, you can save those if you find good boards for these like I'm doing to mine. Warrenty period on these fireball ST series is over or about running out. Cheers, Wizard