-----Original Message-----
From: cctalk-bounces(a)classiccmp.org
[mailto:cctalk-bounces@classiccmp.org] On Behalf Of Mike Ford
Sent: 27 April 2004 18:12
To: General Discussion: On-Topic Posts Only
Subject: RE: Mac IIfx update
I assume that's a diagnostic board for dead
nubus machines?
Yeah, Snooper has a nubus card that checks all voltages etc.
with leds.
Anyone in the UK with one of these? :)
Does the ADB have a fuse?
Apparently it's fed off one of the 2 small upright boards in the PSU....this
afternoon I dismantled and cleaned said PSU for a visual check and there's
no burning or obvious leakage occurred so do I carry on troubleshooting or
get another one from the US for $10+s/h?
Actually, some of the copious glue that's on this PSU has burned and cracked
on what looks like 2 ballast resistors, but I guess they get v.hot so that's
OK.
Heh, about time to try swapping in a known good IIfx
motherboard. ;)
:)
Cheers
--
Adrian/Witchy
Owner & Webmaster, Binary Dinosaurs
www.binarydinosaurs.co.uk - possibly the UK's biggest online computer museum
www.snakebiteandblack.co.uk - ex-monthly gothic shenanigans :o(