9 Dec
2002
9 Dec
'02
11:32 a.m.
Jochen,
Outstanding, I will try this at my next opportunity. I did find a way to
get to the menu by doing a examine/deposit/go sequence (that I don't have
in front of me at the moment).
Any idea what sort of CD ROMs and SCSI disks are compatible?
Thanks,
John
At 10:19 AM -0800 12/7/02, Jochen Kunz wrote:
On Fri, Dec 06, 2002 at 02:12:30PM -0800, John A.
Dundas III wrote:
I have a Dilog SQ706A, for which I am unable to
find docs.
I have a SQ706A too. It is quite easy to configure. It has a 10 pin
connector like the console connector on a MicroVAX II / III CPU
(KA630, KA650, KA655). Connect the console cable from the CPU to
the 10 pin connector of the SQ706A, reset / powercycle the machine
and you get a menu on the console terminal to configure the SQ706A.
I don't know if it works with a PDP-11 / DLV11 console cable /
bulthead.
However it does appear to be a SCSI controller
emulating MSCP.
It is. You can set up SCSI ID => MSCP mapping and CSR in the
menu.
Unfortunately it does only MSCP not TMSCP. But it does map CDROM
drives as MSCP disk.
--
tsch??,
Jochen
Homepage: http://www.unixag-kl.fh-kl.de/~jkunz