Or at least close to it.. but you're on the right track (ugh..), for sure!
FWIW, I have a pair of Shugart 801 here, serial on one unit is 217XX for
reference. There are several obvious differences between the pictured
board, and the board installed to this sample 801.
The card-edge cable connectors on opposite ends of the boards do match up
correctly, so the basic board layout seems to be the same between both of
them.
But my board has a motherboard style header / jumper control arrangement
vs. a DIP-switch. Also, the 90' bent-header cable connectors on the "front"
end of the boards, nearest the drive slot - have more pins on my board.
So it seems like it's certainly an 8" drive controller board, and Shugart
origin would be a very well-informed guess. As to 801, or 8XX series,
variants etc. - well, that's a little more in the weeds. But you've got
some good clues, and if you need any more data / pics of my drives, I'd do
my best to oblige.
On Fri, May 9, 2014 at 5:47 AM, David Griffith <dgriffi at cs.csubak.edu>wrote:
On Fri, 9 May 2014, Alexis Kotlowy wrote:
On 9/05/2014 6:16 PM, David Griffith wrote:
I recently sold this mysterious board on Ebay. The question of what it
is has been gnawing at me. Please take a look at
http://www.ebay.com/itm/231219630118
That looks an awful lot like the board you'd find on a Shugart 8" floppy
drive.
A random Google search gives me this image:
http://farm8.staticflickr.com/7013/6741913209_6a873c7a74_b.jpg
Ah! Indeed it is!
--
David Griffith
dgriffi at
cs.csubak.edu