9 Nov
2007
9 Nov
'07
10:57 a.m.
Hello James,
Tuesday, October 30, 2007, 1:13:46 AM, you wrote:
You need the IR GFX set, the sirius card, cables to
back panel, cables
to breakout box and the breakout box. The breakout box has some logic
inside so you can't just use the sirius card.
Sirius (Card only) + IR (or RE2) is a perfectly valid configuration.
How many useful things one can do with that is a different matter, but
I think the glossy papers also did offer Sirius for Challenge systems
(so even Sirius alone).
Currently I have Sirius Video with BOB on a RE2 at home, I just don't
have the cables complete right now. The following is a hinv of the
machine without BOB installed. If the GFX-Sirius bridge or the BOB are
present the installed options are shown in the "Sirius video:" line.
4 194 MHZ IP25 Processors
CPU: MIPS R10000 Processor Chip Revision: 2.6
FPU: MIPS R10010 Floating Point Chip Revision: 2.6
Main memory size: 1024 Mbytes, 1-way interleaved
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 1 Mbyte
Integral SCSI controller 0: Version WD33C95A, single ended, revision 0
Tape drive: unit 3 on SCSI controller 0: 8mm(8500) cartridge
CDROM: unit 7 on SCSI controller 0
Integral SCSI controller 1: Version WD33C95A, differential, revision 0
Disk drive: unit 1 on SCSI controller 1
Disk drive: unit 8 on SCSI controller 1
Disk drive: unit 9 on SCSI controller 1
Integral SCSI controller 5: Version SCIP/WD33C95A, single ended
Integral SCSI controller 6: Version SCIP/WD33C95A, differential
Integral SCSI controller 7: Version SCIP/WD33C95A, differential
ASO 6-port Serial board 0: revision 2.1.26, Ebus slot 3, IO Adapter 5
Integral EPC serial ports: 4
Integral EPC parallel port: Ebus slot 3
RealityEngineII Graphics Pipe 0 at IO Slot 3 Physical Adapter 2 (Fchip rev 2)
VME 100BaseTX Fast Ethernet: vfe0
Integral Ethernet controller: et0, Ebus slot 3
ATM VMA-200E OC-3: VME_bus_adapter 13, VME_A16_base_addr 0xc000, unit 0
Iris Audio Processor: version A2 revision 1.1.0 unit 0, Ebus slot 3 adapter 5
I/O board, Ebus slot 3: IO4 revision 1
Sirius video: unit 0 revision 5 on bus 0 with no options
VME bus: adapter 13
VME bus: adapter 0 mapped to adapter 13
EPC external interrupts
Consumes 1200W while idling. :-)
--
Best regards,
Gerhard mailto:mail at g-lenerz.de
Old SGI Stuff http://sgistuff.g-lenerz.de/