25 Jun
2018
25 Jun
'18
4:02 a.m.
On 06/24/2018 10:46 PM, Jon Elson wrote:
On 06/24/2018 06:29 PM, Bill Gunshannon via cctalk
wrote:
The WPC5W is a bit more than connectors and traces as it has an AM24LS31
on the board and requires power.? But, if you have the schematic for the
WPC8F
I would love a copy.
bill
On 06/23/2018 06:29 PM, Jon Elson via cctalk wrote:
The personality module is JUST connectors and traces.? So, you could
build one with wire wrap wire or whatever.? I used to have the
schematic of that module here, may still have it around.
On 06/23/2018 01:32 PM, Lyle Bickley via cctalk
wrote:
Yes, but not without the "Personality Modules" that connect to the 50
pin
connector.? I have two boards but only 2 MFM and 1 5.25 floppy adapter.
There's more "stuff" that you can
see from the pictures below. All the
PDP-11 "boxes" and boards look to be good cosmetically.
Photos here:
https://photos.google.com/share/AF1QipMAvVBdhz20-z7l6W9JXhBB0k3ggw0HWveHctE…
There is a blue board with a blue handle that is a Q-bus Andromeda
disk controller.
It will, IIRC, run one floppy and up to 2 MFM hard drives.? I had one
on a uVAX-II a LONG time ago.