22 May
2021
22 May
'21
1:15 a.m.
On 5/21/2021 3:41 PM, Zane Healy via cctalk wrote:
Does anyone have experience using a SCSI2SD board to
replace a Hard Drive on a VAXstation or an AlphaStation? I?m thinking about using them on
some of my systems to reduce the amount of noise. I?ve gotten used to a quiet office.
:-)
Zane
I've got a SCSI2SD V5 in my MicroVAX 3100 M95. It sits on the SCSI bus along with the
CDrom drive and a couple of 18GB Compaq/Seagate drives.? I've also got a SCSI2SD V6 in
each of my two AlphaSever DS10 systems.? I had a few issues with the MV and an earlier
version of the V5 firmware, but the last few versions have been no trouble at all.
In the MV3100 I mounted the SCSI2SD on a 3.5" 3-D printed mount which is mounted on a
3.5" to 5.25" mount and it's mounted in the front opening next to the CDROM
drive.
In the DS10's the 3.5" 3-D printed mount is put in the floppy opening.
--
John H. Reinhardt
PRRT&HS #8909
C&O HS #11530
N-Trak #7566