8 Aug
2000
8 Aug
'00
6:25 a.m.
It's NOT an NTSC-compatible! It's a VGA-compatible intended for use at
640x400 or 640x480 and such. If it's working properly, it should work with
either EGA or VGA adapters. There are VGA to EGA adapters at nearly every
swap-meet since they're not so commonly needed any more, so you shouldn't
have any trouble checking the thing out. Moreover, if you want, you can
probably find an adapter cable at Best-Buy or CompUSA for under $10.
Dick
----- Original Message -----
From: Gary Hildebrand <ghldbrd(a)ccp.com>
To: classcomp mailing list <classiccmp(a)classiccmp.org>
Sent: Tuesday, August 08, 2000 2:24 PM
Subject: Sony CPD 1302
Hello,
I was given this monitor at the Springfield hamfest. According to the
back
panel it is an analog RGB with a DB9 female input.
Does anyone out there
have a pinout on that plug, or shall I attempt to contact Sony on this
one??
I am presuming that it is NTSC/CGA scan frequencies.
Kind regards
--
Gary Hildebrand
Box 6184
St. Joseph, MO 64506-0184
816-662-2612
or
ghldbrd(a)ccp.com