14 Dec
2017
14 Dec
'17
11:20 a.m.
On Thu, Dec 14, 2017 at 2:18 PM, william degnan <billdegnan at gmail.com>
wrote:
On Thu, Dec 14, 2017 at 2:10 PM, william degnan <billdegnan at gmail.com>
wrote:
Sorry...any of the 4 bootstrap ROM sockets. (not slot *banging head
against cabinet*)
b
On Thu, Dec 14, 2017 at 10:59 AM, John Welch via cctalk <
cctalk at classiccmp.org> wrote:
The ROM part number should be 751A9, if you're using a 9312, that's the
ROM for the RL01/RL02. The command is DL0 or DL1. If you use "DL" it
assumes drive 0. You can boot off of any drive however. You can install
the ROM in any slot.
Bill
Now that I have the 11/04 running the next step
is to hook up to the
RL02.
I need to run a cable from the M7762 to one of the connectors on the
back of the RL02. I have cabling stripped from a 11/04.
Is there a terminator that goes on the other connector on the RL02? The
machine that was stripped actually was a RL01, I hope the cable is the same
and if not someone will be able to advise me on that.
Do I need to set any jumpers on the M7762?
Are there any other things I should do the the RL02 prior to plugging it
into the wall and powering it on?
Sincerely,
John Welch
Assuming you have a bridge adapter that goes between the flat cable and
the drive cable. The bottom drive port should be terminated if you're not
connecting to a 2nd drive. Here is how I learned what I needed:
http://www.pdp-11.nl/peripherals/disk/rl-info.html
Bill