windows ce/compaq c120

Many of the update programs run on Windows/XP and then update via a serial or USB connection. I have several iPaqs and have never found a real use. There used to be some Pocket PC software for signal generator, etc but it was all very expensive. Dave G4UGM -----Original Message----- From: cctalk-bounces at classiccmp.org [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Sean Caron Sent: 20 July 2014 19:20 To: General Discussion: On-Topic and Off-Topic Posts; Sean Caron Subject: Re: windows ce/compaq c120 Good luck with that :) I have an old Philips Velo 1 running Windows CE, similar vintage device, the main differential that mine is MIPS and yours is SH-3... I have never found anything to do with it, other than run the existing built-in applications (which basically consist of Pocket IE, Pocket Office and a terminal emulator). The primary redeeming quality of the Velo is the modem built in, otherwise I would say these first generation CE devices are pretty unremarkable. If you can get a modem or serial port on it, best use is probably as a mini-terminal. Best, Sean On Sun, Jul 20, 2014 at 1:58 PM, Derrick Meury <rmx44 at aim.com> wrote: