31 Dec
2016
31 Dec
'16
10:52 a.m.
On Sat, Dec 31, 2016 at 6:45 PM, Ian Finder <ian.finder at gmail.com> wrote:
You're invariably gonna take up more space with
all the removed parts after
you strip it than just keeping the whole unit around to cannibalize as
needed.
So I have to ask... WHY?!
Well, considering the main bits I need are assorted screws and
brackets (the correct
UNC hardware is very difficult to find in the UK), including the hinge
bolts for the logic
chasiss, it's going to fall apart anyway.
As I said, I may well scrap the outer casing metalwork unless I have a
good reason not
to. The boards, HDA and PSU are smaller than the whole thing _and will
fit into odd
corners_. And they are light enough to move around (unlike the RA80!).
There are few parts (other than the screws and cables) that I would
cannibalise for
the R80. Yes, the HDA if it is good and the one in the R80 is dead.
The only custom
electronic parts are the ROMs on the microprocessor board and they are different
(so no point in using those). Other electronic parts I would try to
get new. I don't
swap boards!
-tony