21 Mar
2017
21 Mar
'17
5:48 p.m.
I took a closer look at the adapter, and not only is the an cracked trace
next to a via but a soldering? short. The place in CN is sending me
another one. For now I have put back the original drive. Somewhere in the
junk is the solution to the next issue, either an old hub Tha has coax/BNC
or the box of MAUs that came with the pallet of Sun pizza s
-Pete to much junk
On Mar 21, 2017 5:22 PM, "Glen Slick via cctalk" <cctalk at
classiccmp.org>
wrote:
On Tue, Mar 21, 2017 at 5:49 AM, Pete Lancashire via
cctalk
<cctalk at classiccmp.org> wrote:
Found at least one issue, open trace next to a
via on the adapter. Ran
out
of time to keep checking.
-pete
I just checked my HP 9000/382 and found I put the dead original
Quantum 50-pin SCSI hard drive back in it. I must have been using a
68-pin 9GB SCSI hard drive the last time I was tinkering with it, with
a 50-pin male / 68-pin male adapter. I don't remember having any
issues with that configuration.
I did a clean install of HP-UX 9.10 on my 9000/382 from a B2378-87054
CD image I got from hpmuseum.net
http://hpmuseum.net/display_item.php?sw=525