Charles Dickman wrote:
  I don't think that MAP in a 11/83 (at least for
KDJ11-B ROM V7.0)
 displays the device type for non-CPU CSR. ODT does respond though.
 On Sun, Dec 8, 2013 at 11:54 AM, Mark G Thomas <Mark at misty.com> wrote:
 I'm not having much luck with my 11/73, which turned out to
 be an 11/83, for which I also now have a spare 11/83 and 11/73-B
 CPU. In my 11/83 system, "MAP" shows the address the MSCP or TMSCP
 address the UC07 is jumpered for, but nothing (blank line) under
 "Device Type" for that address, no "DU" or "MU" description
like
 from "MAP" on the 11/53. If I try to get into F.R.D. with @17772150/...,
 it just spits out a question mark, as if nothing is at the address.
 
 Here is what I get from my 11/73 with the quad height CPU (M8190-AB):
 ---------------------------
 < power on >
 Testing in progress - Please wait
 Memory Size is 2048 K Bytes
 9 Step memory test
   Step 1 2 3 4 5 6 7 8 9
 Message 04      Entering Dialog mode
 Commands are Help, Boot, List, Setup, Map and Test.
 Type a command then press the RETURN key: M
 15.206 MHz
 Memory Map
 Starting   Ending       Size in    CSR          CSR     Bus
 Address    address      K Bytes    address      type    type
 00000000 - 07777776     2048       17772100     Parity  Qbus
 Press the RETURN key when ready to continue
 I/O page Map
 Starting   Ending
 Address    address
 17760334 - 17760336
 17765000 - 17765776     CPU ROM or EEPROM
 17772100                Memory CSR
 17772150 - 17772152
 17772200 - 17772276     Supervisor I and D PDR/PAR's
 17772300 - 17772376     Kernel I and D PDR/PAR's
 17772516                MMR3
 17773000 - 17773776     CPU ROM
 17774440 - 17774456
 17777520 - 17777524     BCSR, PCR, BCR/BDR
 17777546                Clock CSR
 17777560 - 17777566     Console SLU
 17777572 - 17777576     MMR0,1,2
 17777600 - 17777676     User I and D PDR/PAR's
 17777744 - 17777752     MSER, CCR, MREG, Hit/Miss
 17777766                CPU Error
 17777772                PIRQ
 Press the RETURN key when ready to continue
 I/O page Map
 Starting   Ending
 Address    address
 17777776                PSW
 Commands are Help, Boot, List, Setup, Map and Test.
 Type a command then press the RETURN key:
 < sent break to get into ODT >
 165216
 @17772150/000000
 17772152/005400
 17772154/?
 @17760334/177777
 17760336/005500
 17760340/?
 @
 -----------
 There is a CQD-220M, RQDX3, and DELQA installed.
 -chuck 
Same from me.. seems that my PDP11 was last booted on Jul 24 2012, shame on
me...
                     Testing in progress - Please wait
                             1 2 3 4 5 6 7 8 9
Commands are Help, Boot, List, Setup, Map and Test.
Type a command then press the RETURN key: MAP
18.000 MHz
CPU Options:    FPA
Memory Map
Starting   Ending       Size in    CSR          CSR     Bus
Address    address      K Bytes    address      type    type
00000000 - 07777776     2048       17772102     ECC     PMI
Press the RETURN key when ready to continue
I/O page Map
Starting   Ending
Address    address
17760500 - 17760536
17765000 - 17765776     CPU ROM or EEPROM
17772102                Memory CSR
17772150 - 17772152
17772200 - 17772276     Supervisor I and D PDR/PAR's
17772300 - 17772376     Kernel I and D PDR/PAR's
17772516                MMR3
17773000 - 17773776     CPU ROM
17774440 - 17774456
17774500 - 17774502
17777520 - 17777524     BCSR, PCR, BCR/BDR
17777546                Clock CSR
17777560 - 17777566     Console SLU
17777572 - 17777576     MMR0,1,2
17777600 - 17777676     User I and D PDR/PAR's
17777744 - 17777752     MSER, CCR, MREG, Hit/Miss
17777766                CPU Error
Press the RETURN key when ready to continue
I/O page Map
Starting   Ending
Address    address
17777772                PIRQ
17777776                PSW
Commands are Help, Boot, List, Setup, Map and Test.
Type a command then press the RETURN key: LIST
Device  Unit
name    numbers Source   Device type
 DU     0-255   CPU ROM  RDnn, RXnn, RC25, RAnn
 DL     0-3     CPU ROM  RL01, RL02
 DX     0-1     CPU ROM  RX01
 DY     0-1     CPU ROM  RX02
 DD     0-1     CPU ROM  TU58
 DK     0-7     CPU ROM  RK05
 MU     0-255   CPU ROM  TKnn, TU81
 MS     0-3     CPU ROM  TK25, TS05
 XH     0-1     CPU ROM  DECNET ETHERNET
 NU     0-15    CPU ROM  DECNET DUV11
 NE     0-15    CPU ROM  DECNET DLV11-E
 NF     0-15    CPU ROM  DECNET DLV11-F
Commands are Help, Boot, List, Setup, Map and Test.
Type a command then press the RETURN key: B DU0
Trying DU0
Starting system from DU0
RT-11XM (S) V05.07
.SET RUN VBGEXE
.LOAD DU
.LOAD LD
.INITIALIZE/NOQUERY VM:
.ASS VM0 CF
.ASS VM0 WF
.SHOW MEMORY
------- Extended Memory --------
Address   Module    Words   Type
-------   ------    -----   ----
17760000  IOPAGE     4096.   PRM    HDW    BYP
10000000  MEMTOP
00760000  VM       921600.   SHR
00261600  ......    81472.
00247200  SL         2688.   PVT
00241200  MU         1536.   PVT
00216000  NQ         4928.   PVT
00207400  SP         1664.   SHR
00165000  DU         4736.   PVT
00160000  MCA        1280.   PRM
00000000  KERNEL    28672.   PRM    HDW
------ Low Memory -------
Address   Module    Words
-------   ------    -----
156724    DU          278.
116010    RMON       8422.
114262    LD          427.
102214    USR        2579.
001000    ..BG..    16710.
.DATE
?KMON-W-No date
.
Oh, sorry, forgot which disk is 2.11BSD on...
                     Testing in progress - Please wait
                             1 2 3 4 5 6 7 8 9
Commands are Help, Boot, List, Setup, Map and Test.
Type a command then press the RETURN key: B DU2
Trying DU2
Starting system from DU2
83Boot from ra(0,2,0) at 0172150
Press <CR> to boot, or any other key to abort: 0
: ra(0,2,0)unix
Boot: bootdev=02420 bootcsr=0172150
2.11 BSD UNIX #8: Sat Jul 21 18:11:58 MET DST 2012
    root at eleven.tsht.lan:/usr/src/sys/ELEVEN
ra0: Ver 5 mod 13
ra2: RA81  size=4433684
attaching qe0 csr 174440
qe0: DEC DELQA addr 08:00:2b:0d:a9:a3
attaching lo0
phys mem  = 2097152
avail mem = 1716160
user mem  = 307200
July 24 09:23:57 init: configure system
dhv 0 csr 160500 vector 320 attached
dhv 1 csr 160520 vector 330 attached
ra 0 csr 172150 vector 154 vectorset attached
rl ? csr 174400 vector 160 skipped:  No autoconfig routines.
tms 0 csr 174500 vector 260 vectorset attached
Automatic reboot in progress...
Tue Jul 24 09:24:09 PDT 2012
/dev/ra2a: 574 files, 3375 used, 35998 free
/dev/rra2d: 2 files, 2 used, 29528 free
/dev/rra2h: 371 files, 25282 used, 1689560 free
/dev/rra2g: 22982 files, 142667 used, 253238 free
Tue Jul 24 09:52:21 PDT 2012
checking quotas: done.
Assuming NETWORKING system ...
add host eleven: gateway localhost
add net default: gateway 192.168.50.254
starting system logger
checking for core dump...
Jul 24 09:52:46 eleven vmunix: ra0: Ver 5 mod 13
Jul 24 09:52:46 eleven vmunix: ra2: RA81  size=4433684
preserving editor files
clearing /tmp
standard daemons: update cron accounting.
starting network daemons: inetd rwhod printer.
starting local daemons: sendmail.
Tue Jul 24 09:53:04 PDT 2012
Jul 24 09:53:06 eleven July 24 09:53:05 init: kernel security level changed from 0 to 1
2.11 BSD UNIX (eleven.tsht.lan) (console)
login:: root
Password:
erase, kill ^U, intr ^C
#
ping 
google.com
PING 
google.com (173.194.70.113): 56 data bytes
64 bytes from 173.194.70.113: icmp_seq=0 ttl=49 time=60 ms
64 bytes from 173.194.70.113: icmp_seq=1 ttl=49 time=40 ms
64 bytes from 173.194.70.113: icmp_seq=2 ttl=49 time=40 ms
64 bytes from 173.194.70.113: icmp_seq=3 ttl=49 time=40 ms
64 bytes from 173.194.70.113: icmp_seq=4 ttl=49 time=40 ms
64 bytes from 173.194.70.113: icmp_seq=5 ttl=49 time=40 ms
64 bytes from 173.194.70.113: icmp_seq=6 ttl=49 time=40 ms
64 bytes from 173.194.70.113: icmp_seq=7 ttl=49 time=40 ms
^C
--- 
google.com ping statistics ---
8 packets transmitted, 8 packets received, 0% packet loss
round-trip min/avg/max = 40/0/60 ms
# BSD eleven.tsht.lan 2.11 2.11 BSD UNIX #8: Sat Jul 21 18:11:58 MET DST 2012     root at
eleven.tsht.lan:/usr/src/sys/ELEVEN  pdp11
## ifconfig qe0
qe0: flags=63<UP,BROADCAST,NOTRAILERS,RUNNING>
        inet 192.168.50.51 netmask ffffff00 broadcast 192.168.50.255
#
Regards,
Holm
--
      Technik Service u. Handel Tiffe, 
www.tsht.de, Holm Tiffe,
     Freiberger Stra?e 42, 09600 Obersch?na, USt-Id: DE253710583
  
www.tsht.de, info at tsht.de, Fax +49 3731 74200, Mobil: 0172 8790 741