24 Jan
2009
24 Jan
'09
11:14 a.m.
----------------------------------------
From: mcguire at neurotica.com
---snip---
If it doesn't, then the drum is screwed, which (on most printers)
means the cartridge is screwed. If it does, then there may be a
piece of crap on one of the corona wires. There's a slot that runs
the width of the toner cartridge that is covered on the inside by a
flexible piece of black plastic film. Use the corona wire cleaner
(the green thing with the felt tip) and stick it in there in the
obvious way, and run it back and forth a few times.
Hi
There isn't the normal corona wire in the III si. Like I
mentioned in my mail, it is replaced by the PCR in that
printer.
Dwight
_________________________________________________________________
Hotmail? goes where you go. On a PC, on the Web, on your phone.
http://www.windowslive-hotmail.com/learnmore/versatility.aspx#mobile?ocid=T…