Cameron,
You can use any straight through RJ45 cable, standard Cat5 is fine as well.
Radio Shack sells do it yourself connector kits with rj45 on the plastic
hood and you just plug in the appropriate cables to the connector, for the
DB-9/DE-9 wire as follows:
2 - yellow
3 - black
4 - orange
5 - green & red
6 - brown
7 - blue
9 - white
If you run into problems and can't get it going, just let me know, I've made
like a doz of them as I use them all the time on various cisco devices.
Curt
----- Original Message -----
From: "Cameron Kaiser" <spectre(a)stockholm.ptloma.edu>
To: <classiccmp(a)classiccmp.org>
Sent: Wednesday, February 06, 2002 1:37 AM
Subject: RJ45 to serial DE-9
I thought I had one, but I don't. Someone out
there have/know where to
find
a cable with an RJ-45 plug on one side and a female
DE-9 (DB-25 okay but
prefer DE-9) on the other? This is to plug my Commodore into the serial
port
on my Lantronix EPS4+1 and attempt to get it on the
network by reverse
Telnet.
--
----------------------------- personal page:
http://www.armory.com/~spectre/ --
Cameron Kaiser, Point Loma Nazarene University *
ckaiser(a)stockholm.ptloma.edu
-- Justice is incidental to law and order. -- J. Edgar
Hoover -----------------