1 Feb
2017
1 Feb
'17
11:07 a.m.
On Wed, Feb 1, 2017 at 12:19 PM, Noel Chiappa <jnc at mercury.lcs.mit.edu>
wrote:
http://www.tom-yam.or.jp/2238/rl/ has a ".. bootable image of v6 root on
RL02 .."
doesn't hurt to try I suppose, see what happens on a real PDP 11/40. My
fear is that it will not have enough RAM on top of whatever other issues
are present.
It will take about two hours, I'll run in the background while I work today.
I had no problem building a RT-11 5 distribution disk earlier today, took a
little over an hour and booted up just fine. I realize this is a totally
different beast, but at least I know I have the process working correctly.
BIll
From: William
Degnan
Can one be made using simH to dump and set up for
RL02 that can then
be
ported as a RL02 disk image to actual RL02 drive?
I see someone has already provided a pointer to someone who ha done this;
I'm
not sure if that system will boot on a hardware 11/40, or if it was built
with
m45.s, or some simlar issue.
It would be pretty easy for anyone with a working V6 UNIX (either on
hardware,
or emulated) to do this, _iff_ they have a V6 RL driver. ('Vanilla' V6 does
not include one.) My 'Bringing up V6 under Ersatz-11' page describes one:
http://www.chiappa.net/~jnc/tech/V6Unix.html#rl
<snip>