31 Oct
2001
31 Oct
'01
8:18 a.m.
Thanks! I believe I have a couple of ESDI drives hanging
around from one of my SGI 4D/70 behemoths....
I've done another quick deja search and, while it's confirmed
the ESDIness of the controller, There doesn't seem to be
any info out there as far as the DIP switch, and pinouts
for the connectors. (I also checked a few other sites I
know of that have scanned DEC manuals, but no luck... anyone
know of a site with a scanned manual for this critter?)
If I remember correctly, ESDI has a MFM-like interconnect
with separate control and data cables. The control cable
daisy-chains across the drives, while the data cables
star out from the controller to each drive. Since my
controller has 3 connectors, I would guess that it probably
supports 2 drives (one connector driving the control cable,
and one data connector for each of two drives) What I don't
know is the pinouts for the connectors on the controller
(since all 3 connectors appear to be identical in size
and SCSI-2 form factor) does anyone have a clue as to the connector
assignments and wiring pattern? I can possibly hack a couple
of SCSI2 cables to make a viable adaptor...
-thanks-
-al-
-acorda(a)1bigred.com
-----Original Message-----
From: Chuck McManis [mailto:cmcmanis@mcmanis.com]
Sent: Wednesday, October 31, 2001 4:00 PM
To: classiccmp(a)classiccmp.org
Subject: Re: Emulex Qbus Disk controller? (Need help identifying this
one)
Search on Emulex QD24 and you'll be rewarded with the
information that it
is an Emulex MSCP ESDI disk controller. Which can be just as
useful as a
SCSI card since finding a couple of 300MB ESDI drives
shouldn't be too
hard. I think I've got a 170MB one laying about somewhere.
Kirk Davis (kdb(a)ndx.net) mentioned he had some SCSI
controllers he was
thinking about trading for PDP-11 gear. Also I just missed a
lot that had
about 10 Dilog SCSI controllers on it at a local scrap/bid
place (had I
known I would have bid more than the $75 it went for :-() my
interest was
in the more mundane things like a couple of DSSI ID plugs and
an external
DSSI disk expansion box.
--Chuck
At 11:32 AM 10/31/01, you wrote:
I'm trying to bring up NetBSD on a Vax
4000/300, and so I'm
looking for a MSCP SCSI disk controller. After going through
my stack of Qbus boards (collected from hamfests, etc.) I came across
one that looks like it might be a SCSI controller... unfortunately,
I haven't been able to confirm it, since a google search turns up
very little on it (a bad sign...sigh) The board is labeled:
"Emulex Corp QD2410401-02 rev F"
It has 3 connectors and a DIP switch on the front plate. The
connectors appear to be of the SCSI-2 form factor. Has anyone
run across this critter before, or tried it with NetBSD? Come
to think of it, Is this even SCSI, or something else
entirely? Also, does anyone know where their might be some
on-line docs for it, or at least a description of the DIP
switch settings...
-thanks-
-al-
-acorda(a)1bigred.com