email/browser for DOS or C64/128?

It's hard to know what to do in this environment. I've been crabbed at so many times for leaving the context in place, which I definitely prefer, since I process lots (hundreds) of emails every day and am getting forgetful as I get older, hence tend to lose my place. Several people have slow terminals via shell access, however, and can't take the time to download all the prior context, however. Some places, as you may know, charge for email by the bit, which means chopping off the prior message saves them money as well as time. Having a fairly high bandwidth connection myself, it doesn't matter so much at this end. HOWEVER ... what I was asking about, actually was WHICH CPU in the COM64/128 runs the browser/etc software. Maybe this thread has drifted off, but I was just curious whether somebody had built a stack for the 6502 core. I've been curious because I'm looking at whipping up a middle layer IP stack processor in programmable logic, implementing just the TCP/UDP at the top and IP/ICMP at the bottom, leaving ARP and all the lower-level (local networi) stuff for someone else, and likewise, leaving the upper layers for someone else as well, e.g. by shoving the data out parallel ports. I have to be able to stream at a rate that keeps up with 10Gb ethernet, parallel interfaced at the lower interface, however. Seeing how this works on a simple CPU like the 6502 core might shed some light and provide some inspiration. Dick ----- Original Message ----- From: "Iggy Drougge" <optimus(a)canit.se> To: "Richard Erlacher" <classiccmp(a)classiccmp.org> Sent: Sunday, October 28, 2001 12:19 AM Subject: Re: email/browser for DOS or C64/128?