28 Mar
2006
28 Mar
'06
1:07 p.m.
Tony wrote....
You are using DL11-W cards, right? That is, ones with
a built-in line
time clock. Do you have a line time clock module -- a KW11-L single-height
board -- in slot C of the very front slot of the processor backplane.
Yup, I'm
using a DL11-W. No, I do not have a KW11-L in 1C. God only knows if
this system ever had one there, but I don't have one in any case. Maybe it
never had one, or maybe it did and fell out years before I got the system.
No clue.
If you do, you must disable (with the DIP switches)
the LTC on the DL11-W
card.
I don't :)
If you don't then there's a wire-wrapped
jumper documented
_somewhere_ in the printset that has to be in place to complete the grant
chain over the slot where the KW11-L goes.
AHA! Now THAT is information I'd
like to know about. It sounds like if you
don't have an M787 and want to use the clock on the DW11-W, you need a
jumper to complete the grant chain over 1C. Sounds like I need that info!
Anyone know what the magic jumper is from/to?
Jay