13 Oct
2015
13 Oct
'15
12:32 a.m.
http://www.tgoldkamp.com/catalogsearch/result/?q=sj5023
http://www.tgoldkamp.com/3m-153-bumpon-153-protective-products-sj5780-black…
On 10/12/15, Ali <cctalk at fahimi.net> wrote:
--
Chris Halarewich
Do they have
to be 3M? i.e., Do you see anything close here?
https://www.westfloridacomponents.com/RubberFeet.html
Chuck,
If I skip the 3M portion requirement the I and have found replacements for
reasonable price and quantity here: http://www.bumperspecialties.com/.
I am not sure if it is a patent issue or what but the 3M parts are much
less
tapered. Specifically while both the 3M and the clones had a 0.81"x0.81"
base the top of the feet are much smaller on the clones. The 3M parts are
0.563"x0.563"while the clones are 0.400"x0.400". The original parts
had the
0.563" top base measurement.
If I cannot find the 3M in reasonable quantity then I will go with the
clone
close match.
-Ali