17 Aug
2020
17 Aug
'20
12:46 p.m.
In the mean time I put my three little Ultra 10s to hard work and finally I
solved the mistery:. One ultra10 has a creatir3d, one has an elite3d with
creatir driver assigned, the last one is using the on-board ati video card
(no UPA card).
Here is what I did:
- installed openbsd 6.7 without any x-related packages;
- recompiled xenocara according to the 'readme';
- after carefully consulted the man page, I inserted the following
xorg.conf in /etc/X11:
Section "ServerLayout"
Identifier "Xenocara Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "Xinerama" "On"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "Protocol" "wskbd"
Option "Device" "/dev/wskbd0"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "SunMouse"
Option "Device" "/dev/tty00"
Option "BaudRate" "1200"
EndSection
Section "Monitor"
Identifier "Monitor"
VendorName "Eizo"
ModelName "FlexScan F563-T"8
HorizSync 31.5-60
VertRefresh 50-70
EndSection
Section "Device"
Identifier "creator0"
Driver "wsfb"
Option "device" "/dev/ttyD0"
Option "ReferenceClock" "28.636"
Option "UseFBDev" "true"
Option "accel" "True"
VendorName "Elite3D" # according to dmesg
BoardName "SUNW"
EndSection
Section "Screen"
Identifier "Screen0"
Device "creator0"
Monitor "Monitor"
EndSection
____________________________________
option device -> /dev/ttyD0 is the creator3d/elite3D UPA card, /dev/ttyC0
is the onboard ati card.
driver "sunffb" not working.
driver "wildcatfb" also not working - that's for expert3d and xvr UPA cards
with "wild cat labs" labels on their chips.
I did not try that xorg.conf + creator3d + included x-related packages (no
xenocara) yet. It may work.
Hardware acceleration sucks for both creator 3D and Elite 3D - I have both
boards. The performance is close to Solaris 10+ original drivers. However
it is far better than on-board ATI. 640x480 MPEG movies render bad, they
drop frames: mplayer + xv and +sdl.
I wonder how xvr1000 performs.
Vasili
www.linkedin.com/in/vasea
On Monday, August 17, 2020, David Brownlee <abs at absd.org> wrote:
On Sun, 16 Aug 2020 at 17:50, Vasile Buruiana via
cctalk
<cctalk at classiccmp.org> wrote:
Greetings.
I would like to solve a mistery regarding graphical user interface on a
Sun
Ultra 10+ Creator3D UPA graphics card, running
OpenBSD 6.7/sparc64.
Everything works fine with Solaris 10. Did anybody manage to get X
running
on openBSD? Sparc64 support is somehow bogus so
I feel that if I talk to
them, there will be no answer.
sparc framebuffer support in NetBSD is pretty good - possibly someone
could port some of the changes across? (I'm assuming your setup should
Just Work - may be worth test booting a NetBSD image to make sure)
David