16 Nov
2005
16 Nov
'05
2:42 a.m.
Hi,
I used the following entry lines and successfully copied DECtapes.
set df enable
att dt0 os8.tu56
att dt1 os8drv.tu56
att ..... (what ever other drive you use)
Then it is striaght forward: boot dt0, and access dt1.
The "tape names" (os8.tu56 and os8drv.tu56) should be substituted
by the names of the files that you use, of course :-)
I don't know much of pdp8's, there are others that know a lot more!
success,
- Henk, PA8PDP
-----Original Message-----
From: cctalk-bounces at classiccmp.org
[mailto:cctalk-bounces at classiccmp.org] On Behalf Of Madcrow Maxwell
Sent: dinsdag 15 november 2005 22:48
To: cctalk at classiccmp.org
Subject: PDP-8 OS/8 Disk Image Problems
I've recently started to play with the PDP-8 using the
excellent SIMH emulator and I've come across a problem: none
of the PDP-8 OS/8 disk images that I've found seem to allow
me to use DECtapes. As all the games I've found (mostly
smallish BASIC programs) seem to come on DECtape/DECtape
images. Does anybody know where to find a disk with proper
drivers. I tried to rebuild the OS, but BUILD couldn't find
the proper drivers either.
Actually, I have my doubts as to whether BASIC even works, as
it seems to not even want to run the little
10 PRINT "HELLO WORLD."
20 END
example that I cooked up.
This message and attachment(s) are intended solely for the use of the addressee and may
contain information that is privileged, confidential or otherwise exempt from disclosure
under applicable law.
If you are not the intended recipient or agent thereof responsible for delivering this
message to the intended recipient, you are hereby notified that any dissemination,
distribution, or copying of this communication is strictly prohibited.
If you have received this communication in error, please notify the sender immediately by
telephone and with a "reply" message.
Thank you for your cooperation.