On 16 Oct 2007 at 17:05, Ethan Dicks wrote:
Multiwire, as was pointed out elsewhere (though
there's another
technology that we used for our VAXBI boards, called "Unilayer" which
is much like Multiwire, except, I think, the difference is that the
Unilayer wire nest is laid out on a bit of pressure/heat-sensitive
adhesive sheet, then bonded to the substrate as a unit, not one wire
at a time.
IIRC, there was another technique called "stitched wire", but the
specifics escape me at the moment.
Cheers,
Chuck