5 Apr
2011
5 Apr
'11
5:02 a.m.
On Tue, 5 Apr 2011, Terry Stewart wrote:
Steve, do you have the Mac emulator disk and the
System disk for MacWorks on
the Lisa? This is what I used for testing the drive as they both load up on
stock 1 MB Lisa 2s with or without a Profile or Widget connected.
I have a bunch of things pulled down from the web:
MacWorksXL3.0.img.hqx
MacWorks_System_Disk.img.hqx
MacWorks1.img.hqx
Which (if any) of those images is the correct one? Do you have an archive
site to recommend?
Several questions:
- I think my unit is 512k (one Apple-branded memory board). Will the
disks you refer to work on that?
- Are you implying that the hang might be due to my not having the ProFile
attached?
- Is it possible to substitute an 800k drive from a newer mac? I have
several with the same 20-pin connector, but ISTR a discussion (that I
naturally cannot find now) about electrical incompatibility with the Lisa
Lite interface board.
I'll try generating the disks you suggest this evening if I can get
straight on which is which.
Steve
Terry (Tez)
----- Original Message ----- From: "Steven Hirsch" <snhirsch at
gmail.com>
To: "Classic Computers Mailing List" <cctech at classiccmp.org>
Sent: Tuesday, April 05, 2011 12:30 PM
Subject: Lisa Test 3.0?
--
Is List Test 3.0 supposed to work on an
unmodified Lisa 2? I'm not quite
sure what's going on. It starts to load and I can watch the head stepping
around. Then after about 45 seconds it just stops with an hourglass on the
screen. Won't respond to keyboard, mouse or the on/off pushbutton!
Any sage advice from the Lisa owners on the list will be appreciated.
Steve
--