5 May
2011
5 May
'11
6:02 p.m.
On Thu, 5 May 2011, Richard wrote:
First, I'd like to minimize the potential for
scratching the paint on
the rack mount plates. Should I use a plastic or teflon washer between
the plate and the mounting screw? Like most rackmount equipment, the
only support is from that front panel, so it has to be mounted pretty
tight to support the weight.
I've used aluminum angle stock, 1/8"x2"x2", and bolted it to the
inside
of the cabinet on each side, between the front and rear rack columns.
Home Depot carries it.
Mike Loewen mloewen at cpumagic.scol.pa.us
Old Technology http://sturgeon.css.psu.edu/~mloewen/Oldtech/