10 Jan
2015
10 Jan
'15
2:15 p.m.
On Thu, Jan 8, 2015 at 8:05 AM, Michael Thompson <
michael.99.thompson at gmail.com> wrote:
From: Al Kossow <aek at bitsavers.org>
You were correct Al, it is the crowbar firing. About 18ms after power on
the +5V output gets to 6.4V and the crowbar fires. There is nothing
obviously fried on the A2 regulator board. I have the schematics for the
power supply and the IPB and BOM for the A2 regulator board. The IPB
callouts don't include the individual reference designators so I need to
reverse engineer it. It is just a simple single sided board so that should
be easy.
There is a 'scope image of the +5V output here:
http://www.ricomputermuseum.org/Home/equipment/dec-pdp-8e/pdp-8e-restoratio…
--
Michael Thompson
To: cctech at classiccmp.org
Subject: Re: Broken H724 power supply from PDP-8/e
On 1/7/15 6:24 PM, Michael Thompson wrote:
The H724 power supply in my PDP-8/e works OK for
about 5 seconds and
then
the +5V output goes to about 3.0V. If I leave it
on for a few more
seconds
it will blow the 20A fuse for the +5V output.
sounds like something is firing the crowbar (Q207) 