test-drb

test-drb@ccmp.vtda.org

101090 discussions

by gzozman＠escape.ca

Here's a silly question, but one I've never understood: Why can't a high density 5 1/4" disk be formatted in a double density drive? When I try, DOS returns a "Track 0 Bad" error message. I thought that a HD disk would simply have a denser coating of magnetic material applied evenly over the entire surface of the disk. I don't see why this should cause problems for a DD drive. However, a few questions come to mind. Is the magnetic coating of a different sensitivity, resulting in a weaker signal for the heads to pick up? Is the magnetic coating applied to the media in "tracks", causing problems when a different TPI spec is attempted on the disk? Since some of the software for my "old" (first generation PC) computers is on 5 1/4" disks of dubious condition, I would like to make copies onto new disks. Since HD disks are still readily available and cheap, I thought this would be an ideal way to do so. I also seem to have fried the 5 1/4" HD drive in my PC while sorting through some old software. It seems a couple of disks had some dirt on them which caused horrible screeching sounds when the disk was spinning, and also deposited a very hard black coating on the heads. The only way I could remove the deposits was to scratch it off with my fingernails (alcohol would not touch it). However, I must have bumped the heads out of alignment, because the drive won't read disks any longer. My question is: can I plug a Double Density drive into the same connector in my modern PC and use it for my old disks? I know I will have to change my BIOS setting, but is there anything else I need to consider? Any input on the above would be much appreciated... thanks in advance! Hope this isn't too far off topic. Grant Zozman gzozman(a)escape.ca

28 years, 4 months

CIE 680/20 Unix-like workstation

by sinasohn＠ricochet.net

Spotted this, thought it might be of interest to someone... >http://www.classifieds2000.com/cgi-cls/ad.exe?P1+C220+A0+R11595+Q8671010 > > Old Computer CIE Systems 6680/20, $50/OBO, Used >> >> Description CIE 680/20 Unix-like workstation. 15 years >> old. Regulus (Unix-like) OS. 2@ 8MB hard >> drives. 0.5 MB RAM. 4-8 MHz clock speed. >> Antique? Many manuals (several hundred >> pages). 3 serial ports. Very large desktop >> unit. Works OK. $50 >> >> Seller Info For sale by private party >> >> (626) 796-5184 [Day] >> (626) 796-5184 [Eve] >> Pasadena, California - L.A. Area 91106 >> >> >> Post Date 30-OCT-97 > > --------------------------------------------------------------------- O- Uncle Roger "There is pleasure pure in being mad sinasohn(a)ricochet.net that none but madmen know." Roger Louis Sinasohn & Associates San Francisco, California http://www.crl.com/~sinasohn/

28 years, 4 months

Classic "Laptops"

by jrkeys＠concentric.net

The 100 is used and in demand overseas, it is used by reporters in the jungles. They have a web site with address if anyone wants donate one. At 04:49 PM 11/10/97 +0000, you wrote: > > >On Mon, 10 Nov 1997 Philip.Belben(a)powertech.co.uk wrote: >> On the subject of early laptops in general, I have heard much in praise >> of the Tandy model 100, but I like the Epson HX20 which has everything >> you could possibly want in a laptop except a decent sized screen! > >Hmmm... Having got both (and an Olivetti M10, Thorn Liberator, etc - no I >don't collect portables), IMHO the keyboard on the HX20 has a much worse >feel than that on the M100. I'd not want to type up anything long on the >HX20, whereas I took my student lecture notes on the M100 (back when the >M100 was almost current...) > >There is a video output option for the HX20. It plugs into the 'serial' >connector (a 38400 baud RS232 link), which is also used for the TF20 disk >drive. I beleive said video interface gave you CGA-like text and graphics. >I've not seen one, however, but it would solve the small-screen problem, >at least when using it at home/on your desk. > >Talking of the HX20, does anyone have a systems disk for the TF20 floppy >drive? I've got the drive and the laptop, but no boot disk, which is a >pity. > > >> >> Philip. >> >> > >-tony > > > >

28 years, 4 months

Classic "Laptops"

by jrkeys＠concentric.net

Yes they made them (1984)and sold for $249.95. Powered by batteries and 6k of ram. I have one in storage picked it up for $10 about 4 years ago. At 03:09 AM 11/11/97 +1030, you wrote: >A simple question - was the Texas Instruments Compact Computer - the CC-40 >- ever produced? I have some photos in a book here, and it looks neat, but >I have never heard of them and have no idea if they are available >second-hand. > >Adam. > > > >

28 years, 4 months

Old stuff

by Philip.Belben＠powertech.co.uk

> >> >....in my experience > >> >with IBM network cards, if they're a round (i.e. BNC) connector, > >> >they're probably the old "baseband" stuff that uses lots of coax > >>cable >and a hub/amplifier, and work only with IBM PC-LAN Program > >>and >NetBEUI....the number 2Mb/sec comes > >> >to mind.... > >> Are we talking about Arcnet here? When I think 2Mb/sec, BNC > >>connector, and 8-bit bus, I think Arcnet, but there may have been > >others.... If the cards are _branded_ IBM, chances are well over > >ten to one that they are > >Token Ring. IBM never touched Arcnet, and was hesitant about > >Ethernet. -- > >Ward Griffiths > > If any of those network cards ARE token-ring and have BNC connectors, I > would love to buy a couple. I got an old Token ring MAU several years ago > that has BNC ports and would like to try it out. Can't tell you how many > people have flat out denied that Token Ring was ever carried over coax! > But the existence of the MAU is proof enough that at one time it was done. Wow. I must admit, I thought that token ring required too many wires for co-ax. Or was the 4-wire connection replaced by coax in, coax out? Seriously, if it's IBM and co-ax I'd guess at SNA (Systems Network Architecture - the famous 3270 series terminals and related devices). This was not a PC network architecture at all - it was a loads-of- terminals-into-the-mainframe architecture - and the card would have come with terminal emulator software. BTW, did anyone discover what the IBM System/74 was? The description sounded more like a system/34 to me, and I certainly never heard of the 74 when I worked at IBM. Philip.

28 years, 4 months

Fudge! I fudged it up! 34A PSU problems.

by dseagrav＠bsdserver.tek-star.net

Okay, I found a plug I forgot to attach. I plugged it in, switched it on, and the breakers went POP! Nothing burned, no hot smell... Time to start rechecking things!

28 years, 4 months

Classic "Laptops"

by sinasohn＠ricochet.net

At 12:04 PM 11/10/97 -0500, you wrote: >Tandy improved the 100 with the 102 which has a lager screen. Actually, the 102 has the same size screen as the 100. Perhaps you're thinking of the 200? The 200 is a clamshell design (iirc) with 24x80 screen. The 102 was simply a lighter, cheaper-to-make version of the 100. --------------------------------------------------------------------- O- Uncle Roger "There is pleasure pure in being mad sinasohn(a)ricochet.net that none but madmen know." Roger Louis Sinasohn & Associates San Francisco, California http://www.crl.com/~sinasohn/

28 years, 4 months

Old Magazines, was (Building A Computer from Scratch Squad)

by rcini＠email.msn.com

Hotze asked: >PS-Does anyone know where I can get old PC Mag issues? Or any other major >magazine? It's funny that you ask this. My wife's uncle just gave me issue #1 of PC World and issues 2 and 3 of PC Magazine. I'd really like to get my hands on PCMag issue #1! He also gave me a late-model original PC *with* theexpansion box (which I understand is a relatively rare item). Anyway, he was a sales rep for IBM for the PC product, and he kept all sorts of stuff in his attic. I guess that every summer, his wife makes him clean up a little more. I'd say go to garage sales, or put an add in the local newspaper. There's a juy who advertises every month in Nuts & Volts, that he collects pre-1980 equipment, mags, etc. Maybe try the same. Anyway, who knows what else he has up there. I've asked him to save a copy of the IBM songbook for me <g>. Rich Cini/WUGNET <rcini(a)msn.com> - ClubWin! Charter Member (6) - MCP Windows 95/Networking

28 years, 4 months

I finally replaced the switches in the 34A, and Guess What! It's , dead!

by dseagrav＠bsdserver.tek-star.net

No reaction to the power whatsoever. Yes, it is plugged in! What did I do wrong? I got all the connections to the switches back in order, it doesn't pop either breaker, just no reaction. Anything in particular I could have missed? WHat's the result of getting that edge connector on upside-down?

28 years, 4 months

Classic Computer Rescue Squad

by adam＠merlin.net.au

><Now for what Allison was waiting for - a mention of Honeywell :-) When ><FTS went bust, they sold the design of the series-86 to Honeywell-Bull, ><who marketed it as the Microsystem Executive. Needless to say it died Can you describe the Microsystem Executive? I have a Honeywell Microsystem 6, but no details about it. It is about 2 feet high, by 1.5 feet deep and 1 foot wide, finished in black and white. (The plastic front and back is black, while the metal case is white). It's a very big beast for a micro, and runs but a single terminal. Adam.

28 years, 4 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb