test-drb

test-drb@ccmp.vtda.org

101090 discussions

by allisonp＠world.std.com

From: HOTZE <photze(a)batelco.com.bh> <Hello... some time ago, there was talk of building a computer, and now I <think that I've got a (bad, possibly) idea. In the earlier half of this Not a bad idea but, it appears you have no technical concept of the extent of it. <century, transistors weren't avaible... vaccum tubes... huge ones, but <now, the transistor has made small ones possible. My point: If we were <to take a tubed design, and re-build it with transistors, we could <probably make it a decent size. < So, what da ya think? The operating characteristics of tube and transistors are far enough apart that circuit techniques applied to one donot apply well to the other. The redesign would not be tivial For most of the tube designs drum memory and mercury filled acoustic delay lines were memory. a few used williams tubes. You would find that difficult to duplicate. To further make a point most of the early transistor designs were evlotionary results of tube designs. One of the first transistor designs was TX1 and TX2(early 50s, MIT/lincoln labs) and theywere not small. Later ones in the 60s were PDP-1, Perkin Elmer, CDC, to name a few and these were large as large machines(fast, big) were the goal. The first small machines were the LINC and PDP-8. Figure 5-10 thousand transistors and thousands of diodes, resistors, capacitors. A foot print for a typical transistor -8 is aroung 20 square feet plus access space. The closest you could come and expect to complete on a singular basis would be a to copy the archectecture of an older machine using ICs. It wouldn't be the real thing, original peripherals would be hard to come by and there may be a base of software if you elect to copy something like a PDP-8. I'd do it as an engineering exercise and beacuse I happen to like certain old archetectures. The result would not be a classic by any means. Allison

28 years, 4 months

Talk Of Building A Computer...

by allisonp＠world.std.com

From: Philip.Belben(a)powertech.co.uk <So how about making our own. A tube containing, say, a 4-bit D-type <latch? Make a few in that range and a valve computer becomes almost <manageable! Besides, the smaller it is, the faster you can make it... A four bit latch using valves would require not less than 8 triodes plus buffers. Very hard to do in one envelope... Also tubes had some characteristics that made it very hard to design fast enough logic that distance(size) was a factor. I have a few 7586 and 6ds4/6cw4 nuvistors and they are 0.8" tall and 0.45 dia and make really good rf amplifiers but slow switches. Allison

28 years, 4 months

Talk Of Building A Computer...

by allisonp＠world.std.com

<If you're going to try this, I'd suggest starting with something simple <like an adder or a flip flop, or a register. You'd get an idea of what <would be involved with a simple processor. But I think it would end up <being pretty expensive. I have some partial designs for transistor hardware. A flipflop design used for the TX2 required 10 transistors, 22 resistors, 8 capacitors, two inductors and three operating voltages. A register 8 bits wide would require 8 of these plus gating logic possibly doubling the number of components needed. You can now see why early machines were register sparse. FYI I have an article for a TIC-TAC-TOE computer using tubes and Neon lamps and it required some nine 2d21 thyratron tubes and 190 neon lamps(serve as gate logic mostly and two per box for display). This is a very limited fixed logic machine and it required a lot. Allison

28 years, 4 months

KAYPRO 10 MANUALS NEEDED

by bernier＠mail.co.leon.fl.us

HI, I'VE GOT A KAYPRO 10 AND IT'S BEEN A MILD CHALLENGE TO ENDEVOR TO OPERATE.IF YOU COULD PART WITH THE OPERATING MANUALS I'D BE BLESSED.THANKS BERNIE

28 years, 4 months

What's MUD mean? (PDP-11 related, not MUD... You know what I , mean!)

by dseagrav＠bsdserver.tek-star.net

There's a few slots up by the CPU labled MUD. I think I know what it means. But I want to make sure. Does it mean Modified Unibus Device? And does that mean DMA slot? And does that mean all the screwing with the backplane I did was unneccesary?

28 years, 4 months

Nifty HEATHKIT equipment available

by dhouse＠abac.com

HEATH Computer Enthusiasts: In September I picked up a Western Union Telegraph Company Model 102 Teleprinter for our museum. It and a complete Heathkit Computer system were the belongings of Charlie Eheman,K6ESN "K6 Every Saturday Night" of San Diego. Charlie was a WWII Navy Chief Radioman; he passed away on August 20, 1997. His brother, Ed Eheman of Texas was in San Diego cleaning out Charlies house. I am looking for someone to actually put the Heathkit system to GOOD use; in its day it was the "cat's meow." It is all in good shape with EXTENSIVE documentation. H9 Video display terminal H10 Paper tape reader and perforator H11 Digital computer (a DEC PDP11) H14 Dot matrix printer H19 Video display terminal H27 Dual 8" Floppy Drive Complete with cables and all manuals, builders notes, including the programming courses, paper tape, 8" floppy disks, etc. Don Robert House, N.S.E. NO JOB IS SO IMPORTANT NADCOMM AND NO SERVICE IS SO URGENT- 3841 Reche Road THAT WE CANNOT TAKE TIME Fallbrook, CA 92028-3810 TO PERFORM OUR WORK SAFELY. e-mail: dhouse(a)abac.com BELL SYSTEM http://www.hem.com/nadcomm 760-723-9959 Telephone 760-781-5161 Facsimile

28 years, 4 months

AST six pak plus

by SUPRDAVE＠aol.com

ok, now that everyone's finished hashing out the 10 year rule... I was going through some of my old junk and discovered the above mentioned card. I need the utilities disk; i think it was called superpak or something like that which had the clock driver, print spooler, and ramdisk setup. I also have a copy of the super pak utilies disk user's guide if anyone wants it. it's the first edition, as i am keeping the second edition that i also got. david

28 years, 4 months

Old stuff found

by jrkeys＠concentric.net

I would like a list of the items jrkeys(a)concentric.net At 08:45 AM 11/19/97 +0000, you wrote: >Found on comp.sys.tandy > > Greetings: > > I have acquired a pile of boxes from an estate sale. Numerous old > computer pieces-parts that I thought might be of some value, but I > don't know where to 'advertise' them -- and now they must go. > > Included are > computers - TI & Radio Shack, some in perfect condition -- one is > in a heavy steel case, RS keybd, could be home brew from misc > parts but I can't tell, could it possibly be a stock TRS 80? > software - cartridges & 5 1/4 floppies > printers - are ribbons & print heads still available? > ref books - old, specialized, probably junk > monitors - USI, PI2, mono, unfamiliar connectors > {also 2 non-computer antiques: 1) an old Associated Press > linotype machine, with ribbons, very heavy. 2) 3M copier.} > chips - small, many, stored in plastic tubes > LNW Research products - look like large keybds but may be > more than that -- one box is different as follows > > You should see this manual, it is beautiful. Yes, Virginia, there is > such a thing as an Antique Computer. Wish it had a date in it; ref is > made to a CA sales tax of 6%. "System Expansion for the TRS-80 [pc > board & user manual] w/ serial RS232C / 20mA I/O > floppy controller > 32K bytes memory" (awesome) > etc.... > Found a date. Guess! Answer to follow at signature. > > So please, somebody, send me a clue, what can I do. > Anyone know an address where I can list these? Are old puters > so plentiful as to not have any value as collector's items? > > Thanks much. > > ---mikey > > DON'T PEEK THE1ANSWER9IS8DON'T1PEEK > > > >Found on comp.sys.ti > >I have a couple TI99/4As, an expansion box with a disk drive and other >stuff (very heavy), another disk drive, and some carts that a coworker >was going to throw away. I live in Gilroy, CA and work in San Jose, >CA. Anyone interested? > >Bostone1 > >Bostone1(a)aol.com > >

28 years, 4 months

New Definiton/ Vaporware lives still!

by allisonp＠world.std.com

<Speaking of Alpha's, is there any chance that I can put my own together? A <agree... it's just plain stupid, and I hate Intel anyway... kind of like in Sure, you can buy them used for prices that aren't all that expensive compared to late model 486 or early p5s. The older ones are now some 4-5 years old. The OS for it will cost you. You have three choices that I know of, OpenVMS (my favorite), Digital Unix, or NT. I don't know that anyone has done a UNIX port outside of digital. Allison

28 years, 4 months

IBM s/36

by henrio＠edu.tsai.es

Hi all! I?m afraid this computer is off-topic (dated 1988). Sorry. An IBM 5363-I has recently been given to me, but I don?t know anything at all about its internal architecture or capabilities. I only own the Central Unit; no cables, no floppies, no tapes, no manuals, no terminals. * It has two 15-pin sub-d connectors in one expansion card. They seem to be for attaching two serial terminals (syncronous? type 5250?) * In another expansion board it has a 9-pin sub-d connector. * There are too four twin-axial connectors. Can anybody help me on this subject? Thanks in advance. -- Sergio Izquierdo Garcia mailto:henrio@edu.tsai.es

28 years, 4 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb