test-drb

test-drb@ccmp.vtda.org

101090 discussions

virtual hamfest was Re: couple of books, spring cleaning

by dburrows＠netpath.net

>John KB6SCO > > >PS: How many Listmembers are also Hams? I know of at least ten or >so of us... dah-dit dah-dit dah dah dit-dah..... QRZ? WB9DCX Dan

26 years, 2 months

virtual hamfest was Re: couple of books, spring cleaning

by ethan_dicks＠yahoo.com

--- John Lawson <jpl15(a)netcom.com> wrote: > John KB6SCO > > > PS: How many Listmembers are also Hams? I know of at least ten or > so of us... dah-dit dah-dit dah dah dit-dah..... QRZ? Ethan Dicks - N8TVD -ethan ===== Infinet has been sold. The domain is going away in February. Please send all replies to erd(a)iname.com __________________________________________________ Do You Yahoo!? Talk to your friends online with Yahoo! Messenger. http://im.yahoo.com

26 years, 2 months

Unibus Terminators available

by healyzh＠aracnet.com

Got the following yesterday, and since I'm not in need of any he OK'd me sending this to the list. Please contact the original author, not me, if interested. Zane From: "J. Darren Peterson" <jdarren(a)ala.net> >I've got three PDP boards new (unopened) in box. The vendor label says >M9312 , but on each box that part number has been scratched through and >the number M9301 written over it. Either way, you can have them for the >cost of shipping if you want. Let me know. > >J. Darren | Zane H. Healy | UNIX Systems Adminstrator | | healyzh(a)aracnet.com (primary) | Linux Enthusiast | | healyzh(a)holonet.net (alternate) | Classic Computer Collector | +----------------------------------+----------------------------+ | Empire of the Petal Throne and Traveller Role Playing, | | and Zane's Computer Museum. | | http://www.aracnet.com/~healyzh/ |

26 years, 2 months

DEC M7551 question

by CLASSICCMP＠trailing-edge.com

>I recently acquired a DEC M7551 (4Mb memory) board for my 11/23+. I >installed the board, but the system traps while doing the power-on memory >test. Unfortunately, I don't have any documentation for the board and I'm >not sure if I have the jumpers/switches set correctly. It could be that the >board is just dead, but I'd like make sure before I give up. If someone >could forward me the settings, it would be greatly appreciated. Are you sure it's a 4 Mbyte (M7551-CA) board? If it's a 2 Mbyte (-BA) or a 1 Mbyte (-AA) board then it's very possible that it's jumpered for some other starting location than zero. And your CPU self-test is expecting memory starting at zero. If you can get to ODT ("@" prompt), try doing some examines of various locations, i.e. "0/", etc., and see if you get anything. If the board isn't responding at "0/", try higher addresses and see if it's living there. -- Tim Shoppa Email: shoppa(a)trailing-edge.com Trailing Edge Technology WWW: http://www.trailing-edge.com/ 7328 Bradley Blvd Voice: 301-767-5917 Bethesda, MD, USA 20817 Fax: 301-767-5927

26 years, 2 months

virtual hamfest was Re: couple of books, spring cleaning

by dogas＠leading.net

>Nah, gotta use the current buzzwords: eHamfest. The web page that becomes the front door to this eHamfest can dynamically scramble the anchors to each of the ventor pages kinda creating a random walk through the sales floor from our browsers... oops, nevermind ;) Mike: dogas(a)leading.net

26 years, 2 months

Western Digital WD 1002S-SHD card ???

by KB9VU＠aol.com

In a message dated 2/15/00 00:26:40 Central Standard Time, donm(a)cts.com writes: > > > > < I visited a surplus dealer today and picked up an external hard drive > > <case that he was throwing out. The case has a Seagate 225 drive in it with > > <some kind of Western Digital interface card. The card has MFM connection > o > > <one end and a 50 pin header on the other. The header is connected to a > > <cable that had a SCSI type plug on it. Does anyone know if the card is a > > <SCSI to MFM interface or what? > > > > Well St225 is MFM so the card is either a host to MFM bridge or SCSI(SASI) > > to MFM bridge. > > > > The real answer is a part number on the card like WD1002-HDO (host > interface > > number). Someone else may be able to confrm if the SHD is SASI or at that > > > time early SCSI. > > TheRef45A says that it is SASI to ST-412. > > - don > Most of the early Heath/Zenith Hard Drive set ups manufactured by after market suppliers used the XEBEC controllers on the hard drives and interfaced to an SCSI card in the computer. The 50 pin female header connected to a 50 pin male header on the SCSI card in my H-89's. There were other schemes, one involving a Western Digital PC controller mounted on the ST-225 and an interface decoder card on the left buss in the H-89. I would bet that the HD described was interfaced to an SCSI card though. Just my .02 worth. YMMV Mike

26 years, 2 months

DEC M7551 question

by wrking＠tsoft.com

I recently acquired a DEC M7551 (4Mb memory) board for my 11/23+. I installed the board, but the system traps while doing the power-on memory test. Unfortunately, I don't have any documentation for the board and I'm not sure if I have the jumpers/switches set correctly. It could be that the board is just dead, but I'd like make sure before I give up. If someone could forward me the settings, it would be greatly appreciated. Thanks, Bill King

26 years, 2 months

dumpster diving and other sources of goodies

by ghldbrd＠ccp.com

Hello, ladies and gents out there I have found good stuff in the dollar bin at Computer Renaissance: 2 working monitors for my Amiga and a Tandberg 525meg tape backup Price: $1.00 per And I don't get dirty or smelly in the process. And I also recommend going to hamfests -- amateur radio fleamarkets. Quite a few guys get this stuff and try to peddle it for a couple bucks. My favorite line is -- How badly do you want to take this boatanchor home?? At one hamfest I found 19 used DSDD 3.5" drives for $30. These are the standard Amiga drive, but useless anywhere else. Get snooping out there -- the used market is drying up fast due to the low low cost of new stuff. Gary Hildebrand Amigaphile WA7KKP scrounger 1st Class

26 years, 2 months

OT: HTML question

by blakeman＠creative-net.net

Not too sre as I don't memorize but there is acrapload of info and ideas up at http://www.htmlhelp.com that you might be interested in. Opening another window >from that one huh? Sounds like you're building a porno site (grin) >Hello, all: > > I'm not too familiar with HTML, but I'm guessing that this question is e >asy to answer. > > What's the code to open a new browser window when someone clicks on a li >nk? I want a new window to open with the requested page as the open document >. > >Thanks. >Rich > >[ Rich Cini/WUGNET >[ ClubWin!/CW1 >[ MCP Windows 95/Windows Networking >[ Collector of "classic" computers >[ http://highgate.comm.sfu.ca/~rcini/classiccmp/ ><================ reply separator =================> > > > >

26 years, 2 months

Western Digital WD 1002S-SHD card ???

by edick＠idcomm.com

This board is a SASI board made primarily to tap into the market grown around the XEBEC and OMTI boards. ADAPTEC somewhat later came out with a series (40xx) which later pretty much owned the market. They were all more or less similar, but none were "real" SCSI, in that (A) they didn't cave a firmly established common command set, and (b) they didn't use all of the soon-to-become-standard SCSI signals, certainly not entirely in the same way. By the time the standard was accepted, it was mostly the ADAPTEC feature set that won out. Nevertheless, Joe, you'll find that card can help you quite a little with putting a hard disk in place on your old CP/M systems. This can be helped along with a "back-end-driver" which installs itself under CP/M as an autocommand. This sits above the BIOS, hence uses a 2-k lower system than it would without it, but makes your SCSI hardware portable from one system to another. That's pretty handy in itself. Dick -----Original Message----- From: Don Maslin <donm(a)cts.com> To: classiccmp(a)classiccmp.org <classiccmp(a)classiccmp.org> Date: Monday, February 14, 2000 11:26 PM Subject: Re: Western Digital WD 1002S-SHD card ??? > > >On Mon, 14 Feb 2000, Allison J Parent wrote: > >> >> < I visited a surplus dealer today and picked up an external hard drive >> <case that he was throwing out. The case has a Seagate 225 drive in it with >> <some kind of Western Digital interface card. The card has MFM connection o >> <one end and a 50 pin header on the other. The header is connected to a >> <cable that had a SCSI type plug on it. Does anyone know if the card is a >> <SCSI to MFM interface or what? >> >> Well St225 is MFM so the card is either a host to MFM bridge or SCSI(SASI) >> to MFM bridge. >> >> The real answer is a part number on the card like WD1002-HDO (host interface >> number). Someone else may be able to confrm if the SHD is SASI or at that >> time early SCSI. > >TheRef45A says that it is SASI to ST-412. > > - don > >> Allison >> >> >

26 years, 2 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb