test-drb

test-drb@ccmp.vtda.org

101090 discussions

by lemay＠cs.umn.edu

Ok, i finally found the guy at his office (we work for the same department here at the university ;) and had a chat. Looks liek he might try to get me the pdp8/e cpu (without any boards) and the boards if he can find the box that they are in. This leaves 2 RK05's and a Dectape unit.. is anyone willing to pay a reasonable amount, AND pick this stuff up in minneapolis, AND do it pretty quickly? I know Dectape units are worth about $1000, so this is a worthwile thing to get if you have teh space for it (the curse of working for the university, is that they dont pay me enough to be able to afford the space for all thsi stuff)... If you want this, speak up and i'll go see what i can arrange with him. i want the cpu, and boards if they are found (my 8/e has no interface boards, and front panel is damaged, and power cable is cut, as you might recall...) -Lawrence LeMay

26 years, 2 months

11/83 backplane info needed

by CLASSICCMP＠trailing-edge.com

>I got an 11/83 in a rack mountable box (5 1/4"), and I would like >to know how many of the slots are type A/B and type C/D, as I have >a spare 11/83 cpu and a spare 1Mb mem. board, and they are >of the types AB & C/D. > >The backplane is identified as H9278-A and has 8 slots. First clue: for just about anything Q-bus, you can find the answer in the Micronotes. They're online at http://metalab.unc.edu/pub/academic/computer-science/history/pdp-11/ just click on "Micronotes". What you're looking for is specifically in Micronte #5, _Q22 Compatible Options_. It tells you Micro/PDP-11 H9278 4 X 3 Q22/CD and 4 X 5 Q22/Q22 Backplane In other words, just the standard BA23 backplane, the first 3 slots are AB/CD slots, the remaining 5 are AB/AB in a serpentine pattern. -- Tim Shoppa Email: shoppa(a)trailing-edge.com Trailing Edge Technology WWW: http://www.trailing-edge.com/ 7328 Bradley Blvd Voice: 301-767-5917 Bethesda, MD, USA 20817 Fax: 301-767-5927

26 years, 2 months

Equipment Available

by af-list＠wfi-inc.com

Hi all, With no small amount of regret, I am liquidating most of my collection in order to focus my attention on a personal matter which is going to require 100% of my time and energy. Thank you all for the sense of community and spirit of comradery here for the past few years. I'm hope to still hang around here and there (VCF, I'll be there!) but will not be actively collecting. Believe me, this decision was not made lightly. My classic computing page will remain as it is, and the list archives will remain there, as will the documentation that I've already scanned. As far as current transactions, I will complete them as soon as possible (Sorry Rich, others). Especially the couple of people that I still owe shipping to, I'm trying to get my ass in gear here... Ok, on to the good stuff. I will ship small items and books, anything more than a few pounds will only be available to someone who wants to pick it up in Glendora, CA or pay to have mailboxes etc pack and ship it. Books (cost is 1.5 x shipping amount): --------------------------------------------------------- Apple II Applesoft Basic Programmers Reference Manual The BASIC Handbook, David Lien Technical Aspects of Data Communication, Digital Press Inside the IBM PC, Peter Norton Problem Solving Principles for Basic Programmers, William Lewis Fundamentals of Structured COBOL (School Textbook) COBOL Wizard (School Textbook) PASCAL, Academic Press (School Textbook) The PASCAL Handbook, Sybex Pascal User Manual and Report, School Text The Debugger's Handbook - Turbo Pascal, McKelvey PASCAL, Findlay and Watt (School Text) UCSD Pascal, (School Text) Elementary Pascal (School Text) Oh! Pascal! (School Text) Turbo Pascal version 3.0 Reference Manual, Borland Introduction to Turbo Pascal, Sybex Turbo Toolbox Reference Manual, Borland DON'T! Or How To Care For Your Computer... Writing in the Computer Age, Fluegelman Soul of CP/M, Waite CP/M Assembly Language Programming, Barbier CP/M and the Personal Computer, Dwyer CP/M Word Processing 68000 Assembly Language Programming, Leventhal Programming in Assembly Language: Macro-11, Sowell Electronic Data Processing, Irwin (1961!) MP and Periph. Handbook, vII - Peripheral, Intel Corp. MC68020 32-bit MP User's Manual A couple of PDP Handbooks that I can't find right now...(1981-ish) Some Micro PDP Docs (look at www.retrobytes.org - I think they're all there) Computer Systems (Free to good homes, pick-up only): --------------------------------------------------------- 6' Rack - VERY Sturdy Incomplete PDP 11/20 - 3 cabinets (Possibly spoken for) Plessey 11/23+ compat (MicroII) - rack-mount w/2 RX01's, external twin RX02 rack unit, Power Control unit (rackmount) HP3000/37 (Micro3000XE) w/2 drives (3 units total, size of double file cabinet each), 9-track 1/2inch tape drive, dot-matrix printer/cabinet, Y2K MPE FOS tapes. A bunch of 9-track tapes with it. Kaypro IV Broken Atari 800 w/2 broken 810 drives (I know, garbage). Atari 1027 printer with gummy wheel. CX-80 keypad. Maybe an 835 modem. Cadnetix Server, Sperry 286 terminal for it, ethernet cable, monitor, kbd/mouse, Cipher 9-track drive, tons of docs (PLEASE SAVE THIS ONE! I'll hold it for years if I have to, but I don't want to.) Michael Grigoni has priority on this, if he wants any of it... Mac LCII, no HD, kbd/mouse,ram. W/Mono monitor. Other stuff (asking price indicated, make any offer:) --------------------------------------------------------- *The reason I have a few dollars as an asking price is that I either paid real money for the item, or it's something that I'd like to see go to someone who really wants/needs it.) SWP ATR8000 - CP/M computer or serial/parallel interface w/print buffer for Atari Computers - asking $50 Dilog SQ706A QBUS SCSI Card - $25 Emulex TC03 QBUS Pertec Controller - $10 DSD MFM QBUS Card - 1.5 x shipping DEC DEQNA Ethernet Card w/cable and manual - $10 DEC M8043 Serial Card - 1.5 x shipping DEC 11/73 CPU w/FPU - $10 DEC RQDX3 w/manual - $10 RT-11 v5.4B on RX50 floppy, complete distro - $10 OK, that's it for round one. After I sort out this mess, I'm sure lots more stuff will come trickling down... Cheers, Aaron

26 years, 2 months

COSMAC 1802 Simulator

by dogas＠leading.net

Tonight I added the mini-assembler and memory block saves&loads to the 1802 simulator. The 95/98/nt console binary and source-code are at: http://users.leading.net/~dogas/classiccmp/cosmac/vcosmac.htm >Allison > >Good runs under W95/nt then, have that running. >M!... Ah UT4. have manual. heh.. early influences... >Wheres Bin/CPP for it? Up there. Let me know if it doesn't do what you think it should. Thanks - Mike: dogas(a)leading.net > >Last emulator for 1802 I'd played with was z80 based, even on a 4mhz z80 >it was faster than 1802. I wonder where I put that. > >

26 years, 2 months

"Investment Grade" Classic Computers

by jeff.kaneko＠juno.com

Guys: I'm faced with a dilemma, and I'm polling for opinions. Some time ago, I swore I would never again publicly broadcast (via this ML) ads for computers that could be considered "Investment Grade". Those of you who have been around long enough know what I'm talking about; a machines that tend to fetch an obscene amount of money, despite the general opinion that they really aren't worth that much. The general objection is that such sales unreasonably inflates the co$t of our hobby, so we can't afford it anymore. The dilemma is this: A friend of mine has such an "Investment Grade" machine; and he wants to sell it to the highest bidder <cringe>. Now I'm faced with two bad choices: Put it up on e-bay, or post it to this forum. I dislike e-bay for what it did to our hobby. I'm not comfortable posting it here, because I have a deep respect for the collectors/hobbyists here (of all stripes), and their opinions on the effects commercialization has had on our hobby (not to mention my own conscience). My friend *specifically* requested I post the ad here, as he was quite pleased with the result, previously. I will only do this if you guys feel this is the appropriate thing for me to do: I post the description, interested parties submit bids, *OFF LIST*. What say you all? Thanks. Jeff ________________________________________________________________ YOU'RE PAYING TOO MUCH FOR THE INTERNET! Juno now offers FREE Internet Access! Try it today - there's no risk! For your FREE software, visit: http://dl.www.juno.com/get/tagj.

26 years, 2 months

[KULUA] Nightline (fwd)

by allisonp＠world.std.com

You mean like the following... VMS standard greeting: Welcome to VAX/VMS on node Piper Morphed to: Piper, no trespassing. Abusers will be persecuted! >BTW -- if FreeVMS ever comes out in intel this box will run it. I keep waiting. In the meantime I have a VS2000 and 3100s thats smaller than most PCs. >bpechter(a)monmouth.com | Microsoft: Where do you want to go today? > | Linux: Where do you want to go tomorrow? > | BSD: Are you guys coming, or what? Add VMS: Waiting! Allison

26 years, 2 months

the latest virus

by allisonp＠world.std.com

>Don't laugh... I still appreciate my AMD 5x86-133 running msdos 6.22 and >WfWg 3.11..... Defiinitely and IE-free zone!!!! :-}) > >Stan Thats a fast system. When you consider that by just running IE4.01 instead of 5.0 you've reduced you footprint and exposure it's something. Also if your apps don't need it Pulling VBA300.dll helps as thats needed to execute VB scripts. You could also pull IE and use Netscape, that works well. Then again you could run dos6.22 and Newdeal software (www.newdeal.com) and get all the stuff without the disk footprint. Allison

26 years, 2 months

[KULUA] Nightline (fwd)

by ghldbrd＠ccp.com

Hello group, Here's something we all knew already, but we need to educate the brainwashed masses about Microslop . . . Last sentence says it all. *** FORWARDED MESSAGE *** Original author: trp0 Written on: 05-May-00 *** Beginning of forwarded message *** Last night, Ted explored the "I Love You" crisis with three "computer virus experts". I'm a little fuzzy on who everyone was for sure, but I know one was a computer crime prosecutor, another was Thrilling(sp?) from Symantec(who totally reminds of this one stand-up comic guy...looks and acts just like the stnad-up....maybe secret alter ego), and I don't remember the other guy's functions at all. All three were going on and on about how users needed to protect themselves with better and more anti-virus software as well as putting up home firewalls! It struck me as odd that they were trying to "educate" people about how to be safe without ever mentioning the fact that nearly all of the nasty email viruses are confined to Microsoft products. I would have liked to have seen a discussion about why MS doesn't consider these things as big hole in their OS. Seems to my like a large majority of even the standard viruses live in the MS realm. Wouldn't it strike you as a little alarming if the product you are turning out is the target of so many easily constructed destructive programs because of the way your product is designed and implemented? Anyway. It was just strange that they were emphasizing that basically all the world's email systems were brought down because of this thing without even noting things such as alternatives that wouldn't have these problems....instead trying to scare the public into consuming more unecessary software to patch up a leaky operating system with third party products instead of encouraging people to get a brain and exercise their free-market will to force product improvement. *shrug* T --- This message brought to you by: trp0(a)falcon.cc.ukans.edu ..and the voices in his head. [Bucket of Truth] "Don't you think I know that!?!" - UCB WebAccess: http://www.magicalbox.com/~trp0 ------------------------ end transmission .... *** End of forwarded message ***

26 years, 2 months

HP calculator thermal printheads (HP82143, etc)

by pete＠dunnington.u-net.com

On May 6, 0:24, Tony Duell wrote: > On Fri May 5, 23:16, Pete Turnbull wrote: > > > Has anyone here managed to mend a printhead like this? > > > > No, but could you use silver-loaded conductive paint? > Yes, I'd thought of that (and I keep a bottle in my tool box). > > Problem is, there's a distinct crack to bridge where the 2 parts have > been stuck together,so the paint may well not last too well. Depends on what stress it might be subject, I suppose. > Worse than that, the printhead is 1/4" wide, and there are 8 tracks in > that width. I don't fancy trying to paint that lot without shorting at > least 2 of them together... Soldering on that pitch I could manage, > though, if only the solder would 'take'. Ah. Given the thickness of the paint, painting tracks would be difficult, even with a good-quality fine brush. The only other suggestion I can think of, is to paint a wide strip, covering all 8 tracks, and then use a scalpel blade (and some patience) to gently scratch gaps between them. -- Pete Peter Turnbull Dept. of Computer Science University of York

26 years, 2 months

Equipment Available

by allisonp＠world.std.com

If you still have it, I'd love to have this one. >Programming in Assembly Language: Macro-11, Sowell Allison

26 years, 2 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb