I was recently moving some things around in the basement, and ran
across a couple of control panels I picked up many years ago. I have
no idea what they're from, but I'd like to know. If you think you can
identify them, please take a look and let me know. They're on my web
page under "Classic Computers/Unidentified Technological Artifacts".
Any help would be appreciated!
-Bill Richman
bill_r(a)inetnebr.com
http://incolor.inetnebr.com/bill_r
(Home of the COSMAC Elf Simulator!)
Hi Dug
Sory I havent been able to reply sooner, I got burried under in email,
like a thousand messages. It takes me a while to go threw.
Yah the power failure is a problem, I would write the note and save it to
disk on a flopy, so I would have lots of notes to go threw. I didn't loose
any data this way, but am not sure what the power failure did to the system
files.
It always booted in to the wordprosessor so I don't think power outage
effected the software.
It took a few days of thinking to figure out how to repair the broken
pin on the CPU, since I couldn't solder something that small.
I didn't think it would work, and was trying to find a new CPU for it,
well, it worked so I was spaired that.
Also, I got a new piece of equiptment, it's a little box about five
inches square and about one and some inches thick. It has a cable whith a
DB 9 feemale conecter on the end of it.
It's a Double talk synthasiser, Thought I'de sneek that in on you. I have
been bissy whith configuring software on a notebook computer to make it
talk.
You can hear what it sounds like if you have a wave player, there are
some wave files and other info about the doubletalk at:
www.rcsys.com
The cool thing about the doubletalk is the text to speech conversion is
done by the doubletalk itself, so it doesn't use the computer's CPU to do
that.
Some of the text to speech software takes about 300K of conventional
memory, this is a painfully slow way to use synthasisers whith computers.
Another part of making the computer talk iss a screen reader program, this
is what I was configuring , or trying to configure.
What the screen reader does is it sends what is on the screen to the
synthasiser to be spoken. The screenreader also does more things, but that
is the basic thing it does.
If you want to experiment whith a screen reader and don't have a
synthasiser, I found one that uses the computer speaker to speek threw, I
like this one because it installs itself and is easy to use, it's called
seekline screen reader.
Seekline has some drawbacks mainly the conventional memory usage mentioned
abuv, another problem is seekline doesn't recognise non ascii characters on
the screen, I don't know what these are since I can't see them. This is a
newsence when you are in some setup programs, because when seekline sais
press nonascii to exit, it is unknown what key to press.
Aside from that seekline is a great little program.
If you wnat to try it out it lives at:
http://world.std.com/~speechfb
The downloadable Seekline screen reader is shareware, one file about a meg
or more called sl.exe
works in dos.
I have been trying to get people to try some of the screenreaders to get
some feed back on what they think, I am not doing a servay or any thing like
that, I am just curious about what people think.
So if you have some extra time let me know what you think., I just thought
of some thing, maybe you could install it on the Wang computer, it just
might talk threw the computer speeker.
I didn't know about seekline when I had the wang but if it worked in it I
would have kept the wang.
Befor you install seekline run the installation on a computer whith a
monotor, so you can see what the menu choises are, seekline doesn't modify
config.sys or autoexec.bat what seekline does is it writes a start.bat file
in the seekline directory it writes to the hard drive.
I forgot the 5.25 flopy problem, oh well, it was just a thought.
Well, write me soon!
Pete Persuric
Net-Tamer V 1.11 - Registered
< I'e thought about making a plastic (perspex/plexiglass) box with the
< fan/filter from a demountable drive (I have that sort of thing in my junk
< box) to blow clean air into the unit. Then take the drive apart, fix it,
< put it back.
A plastic box with a blower and a HEPA filter from one of these new vacuums
to put clean air in the box at positive pressure. The front would be clear
with rubber gloves to allow reaching in. level of clean can easily excees
class 100. Adaquate for sophisticated drive repairs.
< 1) Open up a drive, repair it in a minor way (say replace a pre-amp chip
< on the flex cable, replace the end stops, that sort of thing), and have
< it run long enough to get the data off it.
I've done this on at least 4 micropolus 1325s (rd53, 71mb) that had gummy
end stops and one that had a misset end stop!
none have been under special conditions described.
I also have a st506 that I put a plexi cover on about 10 years ago, still
runs though not currently in use (has CP/M on it).
< 2) Open up a drive, or several drives, and move parts around, including
< heads and platters, to make a working drive that'll run for quite a long
< time. Long enough to think of installing it in a classic computer that I
< was using.
Never considered this. though I have several I could experiment on.
<
< Doing (1) means you have to be able to align heads, etc, over the
< existing tracks on the media. Doing (2) probably requires a lower dust
< particle count.
Not really.
< > filtering, or is it absolutely required? Can a drive be opened in room
< > air and be worked on without introducing dangerous dust particles onto t
Look at the air flow and realize that dust on the platter is suffering from
centrifical force of the platters at 3600 rpm. There is an amazing amount
of moving air trying to send everything to the periphery!
< > Why can't they make a hard drive that's crash proof? Even if the
< > mechanics fail, can't some hardend substance like glass be layed over th
< > platter so if the head did crash it would only scratch the glass? Then
<
< Remember that as data density increases, you need to lower the flying
< height of the head. That's why demountable drives have a lower capacity th
< winchesters of the same period. The demountable has to have a higher
< flying height due to the fact that it's 'dirtier'.
All true but... the newer drive are plated metal (cobalt and nickle are
hard!) and some of the substrates used are ceramic and even glass for
rigiditity.
< The old drum stores had fixed heads. The height was set by the screw
< mounts of the heads - and in general it was quite high because of
< mechanical errors in making the thing. The flying heads of the hard disks
< meant that the head would follow slight run-out in the platter, allowing
< a lower flying height and higher density.
The problem there was bearing runout, the concentricity of the drum and
it's size setting up mechaical vibrations. Later drums would float the
head on a spring and didn't suffer many of the problems as they could
float.
< For this reason, I think it's possibly realistic to consider working on
< 50Mbyte and below - maybe up to 100Mbyte - winchesters at home, given a
< clean box. I personally feel that the 1.2Gbyte 2.5" units will not be
< capable of being repaired in a clean box, though - the flying height is
< just too low. But I'd love to be proved wrong.
I ran an old 320mb 3.5" conner with the cover off as it would not seek to
home track without help. ran like that for several hours while I copied
it. It's internal airflow from the platters rotating were quite impressive.
Like I said in an earlier mail, all these drive have internal filters that
take advanatage of the airflow to capture any dust that makes it in.
Allison
> I was just wondering, how many computers do all you have out there???
I have about 20 - 30 computers, about 15 monitors, and documentation for
about half of the units. Mostly 8-bit systems and some Macs. I've got a
pretty meager collection in comparison to most of you guys. :-) The
pickings just aren't as good here in South-Central PA.
Tom Owad
--
Sysop of Caesarville Online
Client software at: <http://home.earthlink.net/~tomowad/>
In a message dated 98-07-12 10:21:45 EDT, you write:
<< >I was just wondering, how many computers do all you have out there???
>
> Michael Sheflin
> >>
My last official count which was last fall, put me at 83. i have ~100 now, of
which a few are going to a local radio rally next weekend. hopefully, i'll
also be given a complete working mac si system.
david
I was just wondering, how many computers do all you have out there???
Michael Sheflin
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
< However, a book on metal casting at home (did I mention I have other
< insane interests...) mentions that vacuum cleaner motors produce a
< reasonable pressure, but not that much air flow. It suggests a better
< choice is a car heater fan motor. Those are also easy and cheap to get,
< of course.
It would, however a glove box of 8cuft (2x2x2) would not require much air
flow once "cleared" and the remaining air needed is only that required to
provide some trivial positive pressure to then insure clean air flows out
and dirty air does not get sucked in. For that volumes in the 2-10cfm
level is all than is needed. the positive pressure needed is on the order
of 0.1" water. A vacuum motor is if anything over doing it as they are in
the 200-500 cfm range.
< Yep... That's the drive I rebuilt over the air stream from the RK07 :-).
I've done a bunch of them and I just clear my work area and go to work.
For the paranoid a vacuum with a hepa filter on the output blowing down on
the work area might be in order but take care to not stir up dust.
< I think it's going to be important to be able to do this in the future.
< They'll come a point when there are no (say) Micropolis 1200s working,
< but enough non-working ones lying about to be able to be able to make 2
< or 3 into a good one.
A glove box is trivial to build. I'd use a 25 CFM blower and a small hepa
filter and the box could be made with LEXAN (clear plastic) glued with RTV
and cleaned well. the front would be a curtain of 6mil poly with velcro
holding it to the edges. Holes would be provided to allow reaching in with
plastic gloved hands. The hole to not have to be air tight around the
gloves and the positive airflow in in the box would insure air flows out.
Hint: filter is on the output side of the blower forcing air into the box
and the outflow is through a coarse filter to limit outflow.
< For that reason, maybe we should start keeping dead hard drives....
To perfect technique. Getting the right tools is half the battle.
< Sure... I was pointing out that fixed (not sprung) heads -> higher flying
< height (due to runout) -> lower density. Not that drums are always low
< density devices.
understood. Keep in mind the old fixed head drums were mecanically crude
devices and magnetics were not well understood as yet.
< I wonder why, therefore, that service manuals on winchesters always say
< that you can't work on the insides of the HDA outside a clean room
< (which, by implication, you don't have). Even when the same manufacturer
< made demountable drives and did include instructions for head replacement
< on those.
Because if you making 500-1000 drives a day tossing 10-20 for damage due
to someone sneezing is far to costly. Also they have to insure they are
clean. But the level of clean needed is low. A hair net, nylon dust free
gloves, no facial hair and a dustmask over the nose and mouth would
eminimate 90% of human sources. Also not putting finger prints or other
debries on the disk is a must as rag wiping is already far to filthy.
there is care and there is paranoia. For example did you know that ESD
is damaging to magnetic media? If you deliver a hard spark to the plated
media you may pit it some or at least remagnetize a small area, disaster
for servo tracks.
FYI/note: Why do ALL drives spin up then load the heads? It's to allow
the airflow from the spinning media to establish the clean airflow inside
the drive. Also any dust on the active portion of the media spins off the
media and is then captured in a filter.
Allison
for the most part that's close, I do have some that have cost me in the
hundreds (200to400) per machine. Lately I have been getting alot of free
items from people that find out I collect old machines, a old Lawyer friend
called my last week and asked her to pick up some items he no longer
wanted. I have not seem any of it yet, but on my next trip to Texas I get
to see then and I will give an update on these new finds here. I get about
one call a week here and I have not put an ad in the paper yet. So as
always tell everyone you meet that you are a collector and see what happens
it cost nothing to spread the word this way. John
At 01:39 PM 7/12/98 -0500, you wrote:
>On Sun, 12 Jul 1998, John R. Keys Jr. wrote:
>
>> counting computers, printers, monitors, and ext drives I'm over a 1000+
>> items. John
>
>And at an average cost of about $5 each, right? That reminds me of the
>dilemma I faced when I was buying my first new car: I could either pay
>$10K for the new car, or I could get a fleet of 50 old clunkers and start
>my own taxi business. :-)
>
>-- Doug
>
>
>
>Were does one find this Newton Classifieds ??
I was just referring to <comp.sys.newton.marketplace>, but I don't like
to use those newsgroup names when I'm writing in English and not USENET.
:-)
Tom Owad
--
Sysop of Caesarville Online
Client software at: <http://home.earthlink.net/~tomowad/>
>> I beleive just about all the Newton Messagepads were done in clear
>>cases and they're really not _that_ uncommon. You'll see them for sale
>Nope... I don't recall any clear MP's, except maybe a few special ones that
>I've forgotten about... The eMate 300 is the only Newton I remember that
>had a clear case. And if I think hard, I am beginning to recall there might
>have been a few 100's or 110's with clear cases. They may not be uncommon,
>but they aren't common either... Much fewer than the so called "rare" Woz
>edition Apple IIgs computers.
I don't mean in general production. I know I've seen 100's, 110's, and
120's advertised, not sure about 130's. I know I haven't seen any MP
2000's. There's an _excellent_ web site devoted to rare Newtons. I lost
the url, but a search should bring it up without much trouble.
>Never heard of wood ones. Ouch, I got a splinter from my MP... :-) And I
>think there may ahve been 3 or 4 colors for the prototype eMates. I think
>I've seen two different colors. As for MP100's, $50 is the max they should
>be selling for. I saw someone trying to sell one for $300, and it really
>doesn't make sense until you see all the extra memory cards, the larger of
>which can cost a LOT of money.
When Apple discontinued the Newton a few months back there was a small
protest held by Newton users and developers at Apple headquarters. At
this Apple past around wooden Newtons for the people to look at it. I
don't know if any have been released outside the company, though it
wouldn't suprise me if some disappeared during the rally.
>I haven't heard that. You can always paint them, but why? There was the
>beige used on the 128k through the Plus, and starting with later Pluses and
>SE's, they went to a greyish color they call platinum. And there was the
>MacTV which came in a black case, and the PowerBooks which came in platinum
>or black depending on the model. I've never heard of a Mac II or LC with a
>clear case, unless they were custom made cases for specific applications...
There were a few Powerbook 5xx's done in white. These are _very_ rare
>from what I understand (I've never seen one advertised, at any price).
Anybody have a information on this unit? A picture?
Tom Owad
--
Sysop of Caesarville Online
Client software at: <http://home.earthlink.net/~tomowad/>
Sure! I certainly have quite an aura of dandruff around me. Once, I
opened up a 44MB hard drive because it wouldn't work (still don't know
what's wrong). When I was closing it, I noticed that it had dust on the
platter. After wiping it many times, blowing on it, etc. I found it was
impossible to get it really clean.
>Just the mositure droplets from your breath ot the dead skin and hair
>from your
>body is enough to screw it over.
>
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
I have no experience with this, but I am willing to bet that it's the
ribbon cables that go from the circuit board to the LCD. I've known them
to cause this. First, check that the glue or tape that holds them to the
board didn't undo itself. If not, I have no idea how to replace them,
since they are attached right onto the LCD panel.
>No high voltage on an LCD, it's a low volt device that the presence or
lack
>of voltage causes the cystals to align or scatter, causing balck or
clear.
>There's two types and I don't need to go into the diffs in field effect
and
>the other.
>
>Your outlook on what might be at fault is good. This is one of those
things
>that someone that does this a lot could probably snap their fingers and
have
>the answer. I personally haven't had that much experience with that
machine
>and would have to dig in the schematics and do some hands on to try to
>isolate it.
>
>Doug Yowza wrote:
>
>> OK, hardware gurus, how about some remote diagnostic help: PowerBook
160
>> (my first and only Mac), a bunch of black vertical lines of varying
width
>> on the LCD (different patterns on the two panels that make up the
>> display), but otherwise the display looks good (all the bits in the
right
>> place).
>>
>> Video RAM? LCD controller? Cable problem on the laptop side? Cable
>> problem on the LCD side? Bad LCD? Repair FAQ?
>>
>> I have a volt meter, a logic probe, a fear of high current, but I
enjoy
>> the occassional high voltage zap. What's my next move?
>>
>> -- Doug
>
>
>
>--
>
> --------------------------------------------------------------------
> Russ Blakeman
> RB Custom Services / Rt. 1 Box 62E / Harned, KY USA 40144
> Phone: (502) 756-1749 Data/Fax:(502) 756-6991
> Email: rhblake(a)bbtel.com or rhblake(a)bigfoot.com
> Website: http://members.tripod.com/~RHBLAKE/
> ICQ UIN #1714857
> AOL Instant Messenger "RHBLAKEMAN"
> * Parts/Service/Upgrades and more for MOST Computers*
> --------------------------------------------------------------------
>
>
>
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
As I've said before, I think that getting the battery to work correctly
will solve your sad mac problems. I was able to temporarily recharge the
battery by taking an old power cable, plugging it in, and touching the
cables to the battery terminals. It blew the surge protector a couple of
times, but eventually, I was able to power up the mac. However, this
will eventually wear off and the mac will cease to work again. When this
happened to me, I decided to rebuild the battery, so I took it apart and
left it on my shelf for a few months while the mac ran off two AC
adapters. Then I decided I won't rebuild the battery after all because
it would cost $30 to buy the cells, so I put it back together and
reinserted it into the mac. The two AC adapters were still plugged in.
After several weeks of sitting on this intensive overvoltaged charge
cycle (during which the machine still worked), the battery is as
reliable as it should be. I haven't tested it in fear that it might not
recharge too well again, but the portable runs for 15 minutes at least
w/o wall adapters.
>I've heard of people rebuilding them also, though I have never tried (I
>don't currently own a Portable).
>
>Tom Owad
>
>--
>Sysop of Caesarville Online
>Client software at: <http://home.earthlink.net/~tomowad/>
>
>
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
86 computers at the last count
18 video consoles
6 hand-held games
456 game cartidges
lots and lots of software and manuals
Francois
-------------------------------------------------------------
Visit the desperately in need of update
Sanctuary at: http://www.pclink.com/fauradon
>I was just wondering, how many computers do all you have out there???
>
> Michael Sheflin
>
>
>______________________________________________________
>Get Your Private, Free Email at http://www.hotmail.com
>
>What is it with Apple and clear plastic cases anyways? I think I remember
>clear plastic Apple ]['s at dealers. Did Apple do this for all of their
>models?
>
I have an Apple ][ disk drive in a clear (orange) plastic case in front of
me right now. The plastic itself just wraps around the top and two sides,
with the back and bottom being grey plastic. It is a standard size
isk ][ drive, badged on the back Apple Computer Ltd, Holly Hill Industrial
Estate, Cork, Ireland just like the two other regular Disk ][ drives I have.
But the plastic itself has no markings on it, so it MAY have been put on by
an earlier owner.
Phil Guerney - Brisbane, Australia.
guerney(a)uq.net.au
On Sat, 11 Jul 1998 11:02:36 PDT, "Max Eskin" <maxeskin(a)hotmail.com>
wrote:
>>I have the feeling this is the early version, because mine is the later
>>backlit one, which has no dip switches. The sad mac code could very
>>easily be due to a power problem. It will sadmac if there isn't enough
>>power. Note that running off the portable AC adapter is _not_ enough.
>>You need an additional .5 amps, whereever you get it.
Why is that? Who ever heard of a battery charger for a laptop being
*just* a charger? So, if I hook-up a known-good battery power source of
similar amperage to the internal battery slot, I should be good to go.
Thanks.
Rich Cini/WUGNET <nospam_rcini(a)msn.com>
- ClubWin! Charter Member
- MCP Windows 95/Windows Networking
- Preserver of "classic" computers
<<<< ========== reply separator ========== >>>>>
Hi Doug and all,
At 10:39 PM 7/11/98 -0500, you wrote:
>OK, hardware gurus, how about some remote diagnostic help: PowerBook 160
>(my first and only Mac), a bunch of black vertical lines of varying width
>on the LCD (different patterns on the two panels that make up the
>display), but otherwise the display looks good (all the bits in the right
>place).
>
>Video RAM? LCD controller? Cable problem on the laptop side? Cable
>problem on the LCD side? Bad LCD? Repair FAQ?
>
I have seen vertical lines on LCD's, one or more pixels wide. These were
swapped in a repair shop, so thought there was some ESD damage to the
drivers on the LCD module. The lines were still there when the cables,
controller were switched. The rest of the display still worked OK. It may
have bad contacts to the LCD electrodes, as well, this could give the same
effect, although open contacts may leave the addressed line "blank" not black.
-Dave
Am I nuts or is it possible to use 8 and 16 bit ISA cards in an EISA
slot? This is my first hardware level adventure with an EISA machine and
right now it has EISA controllers and open slots, that I would love to
put certain ISA cards (sound for one) into but while I'm reasonably
sure, I don't want to risk blowing anything up. I've been under the
understanding that EISA was backward compatible with ISA.
--
--------------------------------------------------------------------
Russ Blakeman
RB Custom Services / Rt. 1 Box 62E / Harned, KY USA 40144
Phone: (502) 756-1749 Data/Fax:(502) 756-6991
Email: rhblake(a)bbtel.com or rhblake(a)bigfoot.com
Website: http://members.tripod.com/~RHBLAKE/
ICQ UIN #1714857
AOL Instant Messenger "RHBLAKEMAN"
* Parts/Service/Upgrades and more for MOST Computers*
--------------------------------------------------------------------
At 08:34 AM 7/6/98 -0700, you wrote:
>He probably is just referring to the amount of memory it has and is
>clueless enough about the machine that he would call it that. I'm
>positive its just a plain old C64.
I know this was brought up before, but I never heard a clear answer:
What's the difference between a C64 and a C64c, apart from the C128-ish
case design on the C64c?
I heard rumors that it had better sound chips or something, and all the
Commodore dealers (not many left) that I have seen advertise the C64c for
about 20% more than the standard C64.
Russ Blakeman <rhblake(a)bbtel.com> wrote:
> Anyone ever heard of a full length 16 bit ISA AT type card that has
> amonst all the componets a Motorola 68000 (16mhz) processor? It says
> it's made by Microcom, Inc....made in USA
Microcom makes modems. Maybe other datacomm stuff too. What kinds
of connectors are on the back plate?
I have a full-length ISA 8-bit card here with a 68000 on it --
it's a Telebit modem. I'm not sure whether it's a T1000 or a
TrailBlazer Plus though.
-Frank McConnell
Probably not a compatibility thing, more likely a co-processor board
of some sort, like the Definicon.
Kelly
In a message dated 7/11/98 10:20:42 PM Central Daylight Time,
rhblake(a)bbtel.com writes:
> Anyone ever heard of a full length 16 bit ISA AT type card that has
> amonst all the componets a Motorola 68000 (16mhz) processor? It says
> it's made by Microcom, Inc....made in USA
>
> Is this some sort of card to get Apple/Mac compatibility?
>
Ive also opened up hard drives here at the house, but i wouldnt bet on them
running for much longer after. the next time you see sunlight streaming
through a window, take a look. you'll actually be able to see all the dust
particles floating around in the air even though you'd think most if not all
dust would settle.
In a message dated 98-07-11 09:52:03 EDT, you write:
<< [snip]
of doing home drive repair
>without the luxury of a clean room. Is it possible to use some sort of
>cheaply available or easily made vacuum chamber with positive airflow
and
>filtering, or is it absolutely required? Can a drive be opened in room
>air and be worked on without introducing dangerou
: Well, I've opened drives in room air and had them run after, but it does
:make it less reliable. It's a thing like ESD: if you want to risk it. >>
Speaking of curious cards: I just picked up 5 stripped down Dell 433p
machines. Nothing in them except motherboard, 486-dx33 processor, and riser
card. BUT... In two or three I found the following card. I didn't look hard
enough at the numbers, but I can pretty much describe it:
The card has one dsub shell, 9-pin on the back, there's a machined aluminum
chip on the card, marked IBM, and there's an ODD and EVEN ROM set. My first
guess was mono graphics cards (VGA is built-in to MB) but I got to
thinking: Did IBM ever make a network card with this type of connector on
it? All I know is twisted pair, coax, and have seen token ring stuff before
but not worked with it. What does it sound like to you guys?
(Slightly off-topic, by 3 years.)
-
- john higginbotham ____________________________
- webmaster www.pntprinting.com -
- limbo limbo.netpath.net -
>Speaking of Mac Portables, how much would you pay for a very rare
>(prototype?) Mac Portable in a clear plastic case? I couldn't overcome my
>lack of love for Macs to pay the $300 asking price today (but somebody
>else did about an hour later).
I don't believe they were prototypes; more of souvenir-type deals, I
believe. I could see paying $200, $300 is more than I'd spend for most
any 'classic' computer.
>What is it with Apple and clear plastic cases anyways? I think I remember
>clear plastic Apple ]['s at dealers. Did Apple do this for all of their
>models?
I beleive just about all the Newton Messagepads were done in clear
cases and they're really not _that_ uncommon. You'll see them for sale
every 6 months or so if you read the Newton Classifieds. Most recently,
I saw a non-working MP 100 go for $100 (my offer was the second highest
at $40). From what I understand, there were even some Newton's done in
wooden cases, though I'm not sure if these were operational. Prototypes
of the eMate were also done in a wide variety of colors.
I've seen and heard of lots of different Macs being done in clear
plastic. In addition to the Portable you mentioned, several members of
the Mac II family, as well as the LC. I also vaguely remember something
about a green Mac Classic. Anybody?
Tom Owad
--
Sysop of Caesarville Online
Client software at: <http://home.earthlink.net/~tomowad/>
How about we try to get together like the folks in California? I would
really love to talk to some people about old computers without having to
endure all the jokes and elbow rising that I usually get.
Any takers in the Mpls/St Paul area? Eric? Anyone else?
Francois
-------------------------------------------------------------
Visit the Sanctuary at: http://www.pclink.com/fauradon
>Both I live and work in MN (for now) and my family lives in Houston. I do
>alot of road running between the two states.
Just picked up a Dell 4066/XE 486DX2 server unit, complete. It has EISA
slots, tons of drive slots, etc...It is in a BIG case!!....
Anyone possibly have a manual for one of these? I'd like to buy one, pay
for a copy, get a scan over the net, something. With all of you that
work in corporate business someone might have one, or know of an online
text or PDF copy.
--------------------------------------------------------------------
Russ Blakeman
RB Custom Services / Rt. 1 Box 62E / Harned, KY USA 40144
Phone: (502) 756-1749 Data/Fax:(502) 756-6991
Email: rhblake(a)bbtel.com or rhblake(a)bigfoot.com
Website: http://members.tripod.com/~RHBLAKE/
ICQ UIN #1714857
AOL Instant Messenger "RHBLAKEMAN"
* Parts/Service/Upgrades and more for MOST Computers*
--------------------------------------------------------------------
Hi Marvin and all,
At 01:30 PM 7/11/98 -0700, you wrote:
>Attended another great swapmeet today and picked up some things I had
>been looking for.
Couid you and others that mention finds in swapmeets mention what the
swapmeet was and where it is. I know it does not help for all the stuff
already dumstered, but...
Thanks.
-Dave
> I have the adapter, and it looks to be the one made for the machine
>(i.e., not a Powerbook 140 adapter). I'm having big problems with mine -- an
>unidentified Sad Mac code (0000000F, sub code 00007FFF). I can't find a
>reference to $0F in any reference docs that I have; the codes skip from $0E
>to $10. Can't get it to boot at all. As soon as I get the Happy Mac face, I
>get the above Sad Mac. I also have a bad hard drive.
I can't find any mention of it either. And of course, if it doesn't
start up, it's awfully hard to run the diagnostic software. I never did
understand that...
I'd say the HD is the least of your problems. After all, you can always
run the system of the floppy and there is an external SCSI port. There's
a guy in Virgina who does a lot of work with Mac Portables; he has
adapters so that you can use normal SCSI HD's internally for $30. If
anybody's really interested I can probably find his name and email
somewhere.
> I'm going to research the batteries. I hear that you can rebuild the
>pack with 3 ea. 2v/5ah Gates "D" batteries which are commonly available in
>the surplus market. The packs that I have say "Gates Energy Products" on
>them.
I've heard of people rebuilding them also, though I have never tried (I
don't currently own a Portable).
Tom Owad
--
Sysop of Caesarville Online
Client software at: <http://home.earthlink.net/~tomowad/>
>How about we try to get together like the folks in California? I would
>really love to talk to some people about old computers without having to
>endure all the jokes and elbow rising that I usually get.
^^^^^^^^
Yeah I don't get it either I meant eyebrow.
Francois
-------------------------------------------------------------
Visit the desperately in need of update
Sanctuary at: http://www.pclink.com/fauradon
I came across a performa 636cd, (i know, under 10 yrs by far.) but this
is a more generic question. It has a 68LC040 processor; I need a straight
68040 for NetBSD... is it possible to nab one of these from someplace and
just put it in? besides any clock speed issues & whatnot, are they all the
same "under the hood" ? or are they all different. I guess this applies to
several other systems I have, since I'm interested in upgrading other things
as well. any info appreciated. thanks!
-Eric
Hello, all:
I made another trip to Temple University yesterday to rummage through
their storehouse of old computers and documentation. I hate to post a list,
but I don't have a working web site yet, and I want everyone to know what I
have in case someone needs something.
Here it goes...
1. Mac Portable (no HD, bad batteries)
2. Many Unibus and Q-Bus boards
3. Odd DEC single-board computer. 10" x 7" labeled DEC 54-16489, Has two
84-pin PLCC chips
with the LSI LIA 0433 and 0434 marks. Has a DB25, DB15, and DB9.
Recognizable chips
include 8051, FD1796, CDP 6402 (RCA), and D7201C (NEC) Can anyone
identify this?
4. Three Motorola 68K educational computers. Has 32k RAM, 68K, 6850,
14411 chips and a
proto area. Also has two EPROMs. Any guess?
5. Three KIM-1s!! (There are one or two more left, too). Two are
MOS-labeled, one is *brand new* from
Conversational Voice Terminal Corp. of Chicago. Need data on this
one. The MOS-labeled ones
have 1976-dated ceramic chips.
6. A S-100 backplane from Forethought Products. Has 8 slots, some glue
and regulator chips.
7. Lots of documentation. A sampling...
-- Intel: MCS80/85 User Guide (1983), Memory Handbook (83), Embedded
Controller Book (88), Component Data Book (80; looks to be full-line), OEM
Boards (87), 8080/85 Assembly Language Programming Manual, Applications
Note --implementing a floppy system (1981).
-- DEC: Logic handbook (77), Microcomputer Microprocessors (78)
-- Motorola: MC68020 User Man., MEK6800 Guide, 6809 Assembly
Language, 6800 Pgmr. Ref. Manual.
-- Full documentation set for the Rockwell AIM-65 computer (user
guide, BASIC language, Programmers Manual, Hardware Manual, Monitor Program
Listing).
-- Textbooks on microprocessors by Tocci & Laskowski, and Camp, Smay
& Triska
8. Old magazines. The guy who ran the CS department before the guy I know
saved everything. Byte's going back to 1978 (too many to get this trip),
Datamation, others that I never heard of. But, the jewel is that I came
*this* close to getting the Altair issue of Popular Electronics.
Unfortulately, this guy only had as far back as 1/76. Articles include:
Cosmal Elf construction articles, SOL construction, build a Scientific
Calculator, music with the 8080, TV Typewriter, SpeechLab, Computer Club
listings, a personal microwave communications system, various
Classic-relevant product reviews and buyer's guides.
9. DEC paper tapes: PDP-11 power fail, LPS11 tests, General Test Program,
RK05 dynamic test, RK11 utilities, exerciser, static tests.
10. Complete print sets for the following: PDP 11/34A (two copies,
complete), FP11, H960 cabinet, KSI-11, DLV-11, DL-11, H9720, ET-LSI-11,
LSI-11 power supply, MS11, PC11, LPS11, MR11, M873, KD11F, RK05 (regular, F,
and J).
My plan is to scan the articles, and have an on-line database hanging
off of a web site. I also want to implement a bar code system for my
goodies. That'll take a while, though.
Anyway, thanks for the bandwidth.
Rich Cini/WUGNET <nospam_rcini(a)msn.com>
- ClubWin! Charter Member
- MCP Windows 95/Windows Networking
- Preserver of "classic" computers
<<<< ========== reply separator ========== >>>>>
I hear Apple would give these away to dealers, salesman, and others. I
missed a newton on ebay that was clear also it went for close to $400 I think.
At 03:58 PM 7/11/98 -0500, you wrote:
>Speaking of Mac Portables, how much would you pay for a very rare
>(prototype?) Mac Portable in a clear plastic case? I couldn't overcome my
>lack of love for Macs to pay the $300 asking price today (but somebody
>else did about an hour later).
>
>What is it with Apple and clear plastic cases anyways? I think I remember
>clear plastic Apple ]['s at dealers. Did Apple do this for all of their
>models?
>
>(BTW, instead I came home with another GRiD 1900, another HP Portable
>Plus, another Epson PX-8, and another NEC 8201A at an average cost of $6
>each. I have met my spare machine quota.)
>
>-- Doug
>
>
>
Hello, all:
Well, I began to clean up the spoils of my recent recovery mission, and
I'm having problems with the Mac Portable that I got.
Besides the hard drive and batteries being shot and the screen having a
small defect in it, I keep getting a Sad Mac code. It's code 0000000F with a
sub code of 00007FFF. I can't find a reference to the $0F code in any Sad
Mac code listings that I have (they skip over it, going from $0E to $10). I
get the code after inserting a known-working diskette. I've tried 400k disks
and 800k disks with the same results. I haven't tried a 1.44m disk yet,
since I don't have a recent Mac to create one. I've tried a 1.44m disk
created by HVFExplorer, but I get the "bad disk" message.
Also, there's a 4-position DIP switch on the mobo. What's this for? Any
ideas on the Sad Mac code?
Rich Cini/WUGNET <nospam_rcini(a)msn.com>
- ClubWin! Charter Member
- MCP Windows 95/Windows Networking
- Preserver of "classic" computers
<<<< ========== reply separator ========== >>>>>
Do you live in TX or MN?
Francois
-------------------------------------------------------------
Visit the Sanctuary at: http://www.pclink.com/fauradon
>I do leave some things on purpose and sometimes by mistake (thinking I will
>come back the next day or weekend to get it, GONE).
That's because I went there in the mean time :)
>Now since I've got the
>1800 sq ft warehouse space down in Texas, I hope pull all the items from
>public storage and other places together to start selling and trading the
>dup's that I have. Right now my wife and I figure it will take me three
>months to sort it all out and that after moving 4 units of stuff from here
>in MN to Texas to go with the four units I emptied there back May.
>Bottom line is you will get chance to get some items after all. John
>At 07:45 AM 7/11/98 -0500, you wrote:
The m I think if I remember it rite takes the user in to wang's ver of
msdos, The way to get back in, hmm might have been EXIT.
the one I had had a ten meg winchester hard drive, that was some drive, I
think it was made of cast iron well, the case at any rate. It also had a
glass like cover ocovering up the iners of the harddrive.
The two 5.52 flopys wore 180 K and conected to the mother board.
It does slide out of the sleeve quite nicely, the two cards that are
conected togather are lan and mem ory combination, I think, when I removed
them I had less memory.
I found out why it wouldn't boot, it was a pin on the c p u didn't make it
in the hole, when some one tryed to plug it in, straitening the pin cracked
it off, ****! I thought about it for some time and used a peese of coper
wire to fix it, first I incerted the wire into the hole whear the broken pin
would have been once the chip was pluged in, I don't remember how I was able
to locate the hole, I don't have to tell you how tiny they are, the chip
still had a bit id the broken pin sticking out of the side of it, not enough
to solder , but enough to make a tite contact whith the coper wire, after
the chip was plugged back in I trimed itso it didn't stick up a half inchbut
just a little over the top of the chip.
It worked!
I can't remember if it booted in a wordprosesser or a menu, I think it was
a word prosessor.
I seem to remember some thing funy about the program was you couldn't quit
it , it would not let you I think it just rebooted, unless you had a flopy
in drive A:.
The not so funy thing about the monotor is the power and data cords
coming out of it both had the same plug on the end of them, and pluging the
data plug in to the power socket on the vidio card was a hasard.
Since they wore bothe the same kind of plug I tied a twist tie around the
power plug just to let me know whitch was whitch, just incase I got the ich
to use the monoter when I was writting stuff in the word prosesser.
Oh well, It was still is a great machine albeit huge!
Pete
Net-Tamer V 1.11 - Registered
Just got back I bought whatever was left in the room, it was an estate sale
and I got my van filled from floor to ceiling, I almost had to leave my wife
and kids there to get everything home:)
I got a very long list to inventory but so far:
HP 150
HP 87
HP 75C
HP 75D
Cassette unit for the above
Acousic modem for above
HP 85
Plotter 7470? with HPIB
misc printers
misc monitors
PC compatibles
Four cases (dish barrel style) of software for the above plus misc MAC
manuals (the MACs were gone :(
And more...
By the way the total put of pocket for the whole thing including yesterdays
finds $78.
I love to brag about great finds :)
Francois
-------------------------------------------------------------
Visit the Sanctuary at: http://www.pclink.com/fauradon
< of doing home drive repair
< >without the luxury of a clean room. Is it possible to use some sort of
< >cheaply available or easily made vacuum chamber with positive airflow
< and
< >filtering, or is it absolutely required? Can a drive be opened in room
< >air and be worked on without introducing dangerou
<
< Well, I've opened drives in room air and had them run after, but it does
< make it less reliable. It's a thing like ESD: if you want to risk it.
Not entirely true. ESD does permanent damage to the device even if it
doesn't die. ALL (that I know of) drives have an internal air filter to
pick up any dust that may appear so if the media is not damaged the air will
be cleaned and reliability should be nominal (excludes the reason for first
opening it). I have several drives I've had to open all running and all
apparently living longer than average!
Allison
I have the feeling this is the early version, because mine is the later
backlit one, which has no dip switches. The sad mac code could very
easily be due to a power problem. It will sadmac if there isn't enough
power. Note that running off the portable AC adapter is _not_ enough.
You need an additional .5 amps, whereever you get it.
>Hello, all:
>
> Well, I began to clean up the spoils of my recent recovery mission,
and
>I'm having problems with the Mac Portable that I got.
>
> Besides the hard drive and batteries being shot and the screen
having a
>small defect in it, I keep getting a Sad Mac code. It's code 0000000F
with a
>sub code of 00007FFF. I can't find a reference to the $0F code in any
Sad
>Mac code listings that I have (they skip over it, going from $0E to
$10). I
>get the code after inserting a known-working diskette. I've tried 400k
disks
>and 800k disks with the same results. I haven't tried a 1.44m disk yet,
>since I don't have a recent Mac to create one. I've tried a 1.44m disk
>created by HVFExplorer, but I get the "bad disk" message.
>
> Also, there's a 4-position DIP switch on the mobo. What's this for?
Any
>ideas on the Sad Mac code?
>
>Rich Cini/WUGNET <nospam_rcini(a)msn.com>
> - ClubWin! Charter Member
> - MCP Windows 95/Windows Networking
> - Preserver of "classic" computers
><<<< ========== reply separator ========== >>>>>
>
>
>
>
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
>> Well things are getting harder to find and I have been spending too much
>
>Well, no kidding, John! You've bought everything up! :)
Yep everytime I come back empty handed from a flea market or big sale I
blame it on you:)
Francois
-------------------------------------------------------------
Visit the Sanctuary at: http://www.pclink.com/fauradon
[snip]
of doing home drive repair
>without the luxury of a clean room. Is it possible to use some sort of
>cheaply available or easily made vacuum chamber with positive airflow
and
>filtering, or is it absolutely required? Can a drive be opened in room
>air and be worked on without introducing dangerou
Well, I've opened drives in room air and had them run after, but it does
make it less reliable. It's a thing like ESD: if you want to risk it.
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
Well, the cpu on this mac is socketed, i *could* just pop it out- in fact it
resembles an intel type chip very much. that's what really piqued my
interest.
-Eric
From: Zane H. Healy <healyzh(a)ix.netcom.com>
Subject: Re: can I use any 68040 chip in a mac ?
>>just put it in? besides any clock speed issues & whatnot, are they all the
>>same "under the hood" ? or are they all different. I guess this applies to
>>several other systems I have, since I'm interested in upgrading other
things
>>as well. any info appreciated. thanks!
>>
>>-Eric
>
>It requires a special accelerator board to change the CPU on a Mac. It's
>my guess that at best it wouldn't work, at worst it would fry something.
>
>However, can't you add an FPU to the Performa? I seem to remember that you
>can do such things, but...
>It requires a special accelerator board to change the CPU on a Mac. It's
>my guess that at best it wouldn't work, at worst it would fry something.
There's also the program 'SoftFPU' (or something like that) which
emulates an FPU. Slow, but it works.
Tom
--
Sysop of Caesarville Online
Client software at: <http://home.earthlink.net/~tomowad/>
Well things are getting harder to find and I have been spending too much
time and money on ebay. The following is ashort list as the number of
books, manuals, hats, and other computer related items is too large to list
it all here.
1) Mac Color Classic not 10 years yet but a must have for my collection of
Mac's (I'm going for 103 different models '84 to '94)
2) New unopened Sun Interactive UNIX software from Half price books 24.95
3) TRS80 4/4P manual set
4) Atari Portfolio complete with case, 128k module, two sofeware packages,
serial cable and unit, manuals, and product sheets. It works great.
5) Newton fax modem
6) Sharp PC-7000 lunchbox style computer
7) Victor VPC11 model 2601-1
8) Eagle PC model PC-2
9) Cordata model PC-400-25
10) Covalent 2086 CPU Shop System a full tower unit not tested yet
11) Some Atari 400/800 cassette software all new in boxes from .60 to 1.60
each
12) Several boxes of new software for the Apple IIgs
13) Atari SC1224 monitor .80
14) Atari FD drives models SF354 (single) and SF314 (double)
15) Apple IIc power supply not tested
16) Several Atari power supplies
17) Ashton-tate Step IV Ward software and manual
18) HP 9133H
19) HP 9122 model D
20) Perkin-Elmer 7700 Professional computer and KB no monitor
21) HP 9130A
22) HP 2671G printer
23) Lexas Turbo 2400 mini modem
24) 8-Mac Plus KB's will be trading some of these
25) 6-Mac 128k KB'S
26) 10-2600 cartridges
27) TI Terminal Emulator II module
That's all for now will list some of the other items later. Keep computing
John
Any chance of getting a KIM?
Dave
> ----------
> From: Richard A. Cini, Jr.[SMTP:rcini@email.msn.com]
> Reply To: classiccmp(a)u.washington.edu
> Sent: July 10, 1998 1:20 PM
> To: Discussion re-collecting of classic computers
> Subject: Oh, boy. What a haul!
>
> Hello, all:
>
> I made another trip to Temple University yesterday to rummage through
> their storehouse of old computers and documentation. I hate to post a
> list,
> but I don't have a working web site yet, and I want everyone to know what
> I
> have in case someone needs something.
>
> Here it goes...
>
> 1. Mac Portable (no HD, bad batteries)
> 2. Many Unibus and Q-Bus boards
> 3. Odd DEC single-board computer. 10" x 7" labeled DEC 54-16489, Has
> two
> 84-pin PLCC chips
> with the LSI LIA 0433 and 0434 marks. Has a DB25, DB15, and DB9.
> Recognizable chips
> include 8051, FD1796, CDP 6402 (RCA), and D7201C (NEC) Can anyone
> identify this?
> 4. Three Motorola 68K educational computers. Has 32k RAM, 68K, 6850,
> 14411 chips and a
> proto area. Also has two EPROMs. Any guess?
> 5. Three KIM-1s!! (There are one or two more left, too). Two are
> MOS-labeled, one is *brand new* from
> Conversational Voice Terminal Corp. of Chicago. Need data on this
> one. The MOS-labeled ones
> have 1976-dated ceramic chips.
> 6. A S-100 backplane from Forethought Products. Has 8 slots, some glue
> and regulator chips.
> 7. Lots of documentation. A sampling...
> -- Intel: MCS80/85 User Guide (1983), Memory Handbook (83),
> Embedded
> Controller Book (88), Component Data Book (80; looks to be full-line), OEM
> Boards (87), 8080/85 Assembly Language Programming Manual, Applications
> Note --implementing a floppy system (1981).
> -- DEC: Logic handbook (77), Microcomputer Microprocessors (78)
> -- Motorola: MC68020 User Man., MEK6800 Guide, 6809 Assembly
> Language, 6800 Pgmr. Ref. Manual.
> -- Full documentation set for the Rockwell AIM-65 computer (user
> guide, BASIC language, Programmers Manual, Hardware Manual, Monitor
> Program
> Listing).
> -- Textbooks on microprocessors by Tocci & Laskowski, and Camp,
> Smay
> & Triska
> 8. Old magazines. The guy who ran the CS department before the guy I
> know
> saved everything. Byte's going back to 1978 (too many to get this trip),
> Datamation, others that I never heard of. But, the jewel is that I came
> *this* close to getting the Altair issue of Popular Electronics.
> Unfortulately, this guy only had as far back as 1/76. Articles include:
> Cosmal Elf construction articles, SOL construction, build a Scientific
> Calculator, music with the 8080, TV Typewriter, SpeechLab, Computer Club
> listings, a personal microwave communications system, various
> Classic-relevant product reviews and buyer's guides.
> 9. DEC paper tapes: PDP-11 power fail, LPS11 tests, General Test
> Program,
> RK05 dynamic test, RK11 utilities, exerciser, static tests.
> 10. Complete print sets for the following: PDP 11/34A (two copies,
> complete), FP11, H960 cabinet, KSI-11, DLV-11, DL-11, H9720, ET-LSI-11,
> LSI-11 power supply, MS11, PC11, LPS11, MR11, M873, KD11F, RK05 (regular,
> F,
> and J).
>
> My plan is to scan the articles, and have an on-line database hanging
> off of a web site. I also want to implement a bar code system for my
> goodies. That'll take a while, though.
>
> Anyway, thanks for the bandwidth.
>
> Rich Cini/WUGNET <nospam_rcini(a)msn.com>
> - ClubWin! Charter Member
> - MCP Windows 95/Windows Networking
> - Preserver of "classic" computers
> <<<< ========== reply separator ========== >>>>>
>
>
>
> From: dave dameron <ddameron(a)earthlink.net>
> Subject: Intel bubble memory modules
>
[snip!]
>
> They also had a Commodore 64, beige with dark keys, modified with 2 BNC
> jacks on the back. I could find no documentation that went with it. Their
> price was $10 USD.
> -Dave
My first thought for the 2 BNCs would be a Stereo SID (sound chip)
modification. That is a popular hardware mod that adds a second SID
sythesizer chip to the 64 so you can have 2 channel, 6 voice stereo. There
are a few music writer programs and players and a game or two that support it.
Usually the mod has RCA type jacks though...
Pretty cool if you like the 64 sound output (which is really good for an 8-bitter).
--
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
Larry Anderson - Sysop of Silicon Realms BBS (300-2400bd) (209) 754-1363
Visit my Commodore 8-Bit web page at:
http://www.goldrush.com/~foxnhare/commodore.html
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
Hi,
Great day today, I found:
Zenith ZT1, aparently it is a phone terminal and has the manual to connect
to compuserve. Is it also useable as a computer? I have the manual but it's
burried at the moment.
HP 97 brand new in the box and it seems to be working fine. I'm charging the
battery right now to check it. Standard pack and business decision pack plus
a bag of programming sheets
Text editing, math, Visicalc Plus and owners manuals for the HP85
HP thermal printer with HPIL interface (HP 82162A) what is that for? is it
tfor the HP 75?
HP82901M Dual 5.25" flexible disk drive with HPIB interface. I believe it is
for the HP85
Box of five blank tapes for the HP 85
HP110 laptop computer (8086 or so) with MS-DOS 2.0 in ROM With manual and
lotus 123 complete.
2 HP9114 3.5" disk drives for the HP 110 with manual charger and HPIL cables
HP 2225A Think jet with HPIL interface for the HP 110
On the sad side I had to pass on an Original MAC M0001, a MAC SE, SE/30 the
HP 85 (already have 2) a box of thermal paper for the HP85, a commodore
calculator and loads of softwares for the HP 85 and 150 series and a bunch
of unrecognized boxes (probably compatibles) I'm really thinking about going
back tomorrow If I can get the OK from above:)
Francois
-------------------------------------------------------------
Visit the Sanctuary at: http://www.pclink.com/fauradon
As I told Tony Duell a day or two ago, I would list the modules residing in
my 11/730. Point being to compare machines for completeness/options and to
get feedback from list members to learn more about what both of us have
exactly.
I would like to fully restore this machine to it's original completeness
although not necessarily its original options/configuration. I'm missing
front/rear doors, some hardware, a few modules, misc. items and the
all-important TU58 tape which has the bootup microcode(!). Hopefully a
fellow who responded privately can find some docs and cabinet parts that he
might have which will help for sure. I'll be looking for the rest though.
The main problem I have found with the module list is that there are no
references in the Field Guide for these particular 11/730 modules. Maybe
because the Guide was for *only* Q-bus and UNIBUS modules and these don't
fall into that classification *or* simply the info for these modules was
not at hand when the FG was put together. I'm working on that now with a
fellow who emailed me in reference to a more up-to-date FG. Any input from
the group is welcome of course.
Here's the list of modules, in order of slot number, in the 730 as I
received it:
1. empty
2. empty
3. empty
4. M8390 (-B?)
5. empty
6. M8391 MCT
7. M8394
8. M8750-CP
9. M8750-CP
10. M8396
11. M8396
12. G7273
13. G7273
14. empty
No expansion backplane is installed presently. I think it may have been
taken out as there is reference on the module list printed on the CPU cover
which shows a 9-slot DD11-DK Unibus Expander Backplane installed in the
left side of the crate.
I have not dug into either of the BA11 crates I have in the pile yet but
would the 9-slot expansion backplanes in these actually be the DD11-DK? Is
"DD11-DK" marked anywhere on them?
The Ethernet cable is also hanging loose in the crate. Either a single
board Ethernet I/F was in slot 14 or the 2-board DEUNA or equivalent was in
two slotts of the DD11-DK expansion.
For the sake of comparison with what the factory-original module compliment
says, I will note in quotes ("") what's on the CPU cover label:
1. "Not used"
2. "M8389 FPA (Option)" (must be a floating pt. adaptor)
3. "Not used"
4. "M8390 DAP"
5. "Not used"
6. "M8391-YA or M8391 MCT"
7. "M8394 WCS"
8. "MS730-CA"
9. "MS730-CA"
10. "G7273/Memory"
11. "G7273/Not for Unibus Option"
12. "G7273/Not for Unibus Option"
13. "G7273/Unibus Option"
14. "M9202" (and) "G7273/Unibus Option"
<end 11/730-A CPU listing>
<begin DD11-DK backplane listing>
1. "M9202" (bridge from slot 14, above) "G727"
2. "G727"
| | (all 9 slots have G727's listed)
| |
9. "M9302" (and) "G727"
Hmmm, if I either have a DD11-DK in a BA11 or something around here or if I
could find one amongst list members, then I could hang Unibus options off
this machine :) Cool!
Anyway, my guess is that I don't have too far to go to restore this box
with help from folks here. Tony would benefit too regarding his own 730.
And yes, I understand it is a true dog as to performance. But it was
mentioned by Allison correctly that at least this is a "real iron" VAX
which will fit in a room and power requirements are low enough to be rather
tolerable. Recall I have a space problem here. I saw a picture and weight
(1k+ lbs) of a 11/780. The wife would shoot me if I had one to keep out of
that truckload <g>.
Thanks again for the help. Regards,
--Chris
-- --
Christian Fandt, Electronic/Electrical Historian
Jamestown, NY USA
Member of Antique Wireless Association
URL: http://www.ggw.org/freenet/a/awa/
In looking at the RK07 and RL01/02 drives that I have from the Great Haul,
the connectors and cables look rather similar.
In the 11/34A I am keeping, there is a five-board set which is the RK611
controller. The previous owner had RK07's hung off this controller. I want
to use at least one RL02 in the system as most of the disk packs with the
important s/w are RL01/02. Anybody know if the RLs will work off the RK611
controller? (This is one of those dumb newbie questions!)
If it won't work, anybody have a spare RL11 controller module (M7762)
they'll let go? There's a heap of RL's (7) in the stuff I got but the only
machine in the whole pile that has an RL11 is the 11/24 which is not going
to be kept by me.
What would the cable run limits be on either the RL11 or RK611 systems?
As someone had told me a bit earlier about SDI systems, only ODD number of
cables must be used. Any such limitation here?
Thanks for your input!
--Chris
-- --
Christian Fandt, Electronic/Electrical Historian
Jamestown, NY USA
Member of Antique Wireless Association
URL: http://www.ggw.org/freenet/a/awa/
I finally went back to check on that "Wang PC-002" I asked about earlier.
It was a bit more scratched up, but it hadn't moved an inch in the past
two and a half(?) weeks.
I managed to locate its keyboard, as well as the keyboard for an aparently
keyboardless Tandy 1000TX that was in another part of the building, so I
decided to drag the Wang machine home.
NOT an easy job. It was about a mile to the nearest subway station, with
lots of broken escalators up and down once I got into the system. And I
was carrying a large book bag full of stuff I have to look over for work.
By the time the bus dropped me off near home, we were in the middle of a
thunder storm. So I left the computer on top of someone's gate post (wide
brick thing with flat cement top) under some trees near the bus stop, and
made a run for home (about a half-mile).
I went back with the car as soon as I got home.
Anyway, it sure is a curious beast. And HUGE, to my eyes. It's not quite
as big as I reported before, but it's BIG. The closest offhand and
possibly innacurate comparison I could make is to a friend's MicroVax, but
I don't know what kind of MicroVax that is.
If I sit it vertically (a position the box looks very comfortable in), it
measures about 15" high, by 6.5" wide, by 23" long.
It has two floppy drives mounted in the front: one half-height 5.25"
drive, and one full-hieght 5.25" drive.
In the back, I can see the backs of various cards. One of them has the
connector for the keyboard (4-pin DIN) as well as one serial and one
parallel port, so it must be the motherboard. Beside that (or above,
depending on orientation) is a board with a sticker reading "PM032-B 512K
Memory Expansion". Next to that, is what appears to be an empty slot, and
then there is what appears to be some kind of networking card. It has two
coaxial cable connectors and a toggle switch. There is another card
beside (or above) that, with no ports or labels, but I can see chips
through the air holes. Beside (or above) the mystery card is a board with
a label reading "PM101 IBM Mono Emulation". It has an 8-pin DIN connector
and a 5-pin DIN connector, which I would guess are for monitor and PC
keyboard(?).
Does anyone know the pinouts of the various ports, or anything else about
this machine? Will it read PC disks or do I need to boot it up with some
wacky Wang-format disk? Does the machine require some kind of terminal,
or will a monitor connect into the back of the IBM Emulation board and let
me see what's going on?
The sticker on the side (top) of the machine says it's a PC-002, but the
sticker on the back says it's a PC-P002.
The keyboard has a lot of word processing functions on it.
Anyway, I haven't opened it up yet, or done anything with it but look at
it. Disassembly looks like it might be difficult, because I have to slip
the innards through the full length metal sleeve. I won't be up to that
until my arms recover. I've even got bruises and some kind of blood
blisters or something, from carrying that thing. :/
I probably won't have time to play with it today as I promised to install
NetBSD 1.3.2 and some UNIX software on my Amiga 3000 instead of coming to
work. (And look at the time. :) )
Doug Spence
ds_spenc(a)alcor.concordia.ca
http://alcor.concordia.ca/~ds_spenc/
