- test-drb@ccmp.vtda.org - classiccmp.org

Followup to Adrian's caption competition

by tim.myers＠sunplan.com

I didn't see this come across the list, so here goes. Apologies if it's already been covered. http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=2301705304 Tim

23 years, 3 months

4
3
0 0

Replies to posts

by julesrichardsonuk＠yahoo.co.uk

hi all... A request: can people please stop including the whole of the digest when replying to posts? The digest-in-a-digest mode is starting to get a little annoying :-) cheers Jules __________________________________________________ Do You Yahoo!? Everything you'll ever need on one web page >from News and Sport to Email and Music Charts http://uk.my.yahoo.com

23 years, 3 months

2
1
0 0

Quasijarus 4.3BSD on 1600bpi magtape

by jwillis＠arielusa.com

Kelly: Please e-mail me off list, as this stupid outlook web access won't let me see your email address. Thanks, John -----Original Message----- From: Kelly Leavitt Sent: Wed 1/22/2003 5:40 PM To: 'cctalk(a)classiccmp.org' Cc: Subject: RE: Quasijarus 4.3BSD on 1600bpi magtape I've gotten the download info, I will need to compile the decompress to run on my unix, and I will give an update shortly. Where would you need the tape shipped? -----Original Message----- From: John Willis [mailto:jwillis@arielusa.com] Sent: Wednesday, January 22, 2003 7:50 PM To: cctalk(a)classiccmp.org Subject: RE: Quasijarus 4.3BSD on 1600bpi magtape Sounds great. Let me know what you find out! Thanks, John "VAX Pirate" Willis

23 years, 3 months

1
0
0 0

Quasijarus 4.3BSD on 1600bpi magtape

by kelly＠catcorner.org

I've gotten the download info, I will need to compile the decompress to run on my unix, and I will give an update shortly. Where would you need the tape shipped? -----Original Message----- From: John Willis [mailto:jwillis@arielusa.com] Sent: Wednesday, January 22, 2003 7:50 PM To: cctalk(a)classiccmp.org Subject: RE: Quasijarus 4.3BSD on 1600bpi magtape Sounds great. Let me know what you find out! Thanks, John "VAX Pirate" Willis

23 years, 3 months

1
0
0 0

A way to erase OTP components?

by dwightk.elvey＠amd.com

>From: "Eric Smith" <eric(a)brouhaha.com> > >Doug Jackson wrote: >> A UV LED????? >[...] >> I was aware that we have White, and blue (Through Phospor, and funky >> doping), but these UV devices are new to me... > >Blue LEDs don't require any phosphor. The phosphors are used to get >*other* colors from blue or UV LEDs, such as white. Agilent made some >really nice white LEDs that didn't have the remaining blue tint of >the common ones, but they were expensive and no one wanted to pay >the premium, so they've been discontinued. > >The earliest blue LEDs (Silicon Carbide) had very low output, so RGB LEDs >needed two blue dice to one each red and green to get decent matching. >However, so much R&D has been done to improve them that now blue LEDs >(gallium nitride) are now the *most* efficient, at least in the visible >spectrum. > Hi That doesn't explain short wave UV LED's. If you had enough energy to erase an EPROM, it would be strong enough to damage the cornea of your eye. I've experimented with long wave UV when I was at Intel ( years ago ). Even a week under one of these had no effect. Dwight

23 years, 3 months

1
0
0 0

Quasijarus 4.3BSD on 1600bpi magtape

by jwillis＠arielusa.com

Sounds great. Let me know what you find out! Thanks, John "VAX Pirate" Willis -----Original Message----- From: Kelly Leavitt Sent: Wed 1/22/2003 4:03 PM To: 'cctalk(a)classiccmp.org' Cc: Subject: RE: Quasijarus 4.3BSD on 1600bpi magtape Depending on where you would need it shipped, I'd try making one for you. I couldn't find the FTP site, but if given the file specifics, I've got a T1 available for the download too. MS: Where can I find the instructions and content? I'll read them over and see if my tape drive will do what is needed. It is pretty versitile. I use it to read and convert tapes from all kinds of systems. Kelly -----Original Message----- From: msokolov(a)ivan.harhan.org [mailto:msokolov@ivan.harhan.org] Sent: Wednesday, January 22, 2003 1:41 AM To: cctalk(a)classiccmp.org Subject: Re: Quasijarus 4.3BSD on 1600bpi magtape jwillis(a)dahmer.vistech.net wrote: > Does anyone know of a source for Quasijarus 4.3BSD on 1600bpi magtape? (TU80) Anyone with a 9-track tape unit (I'm sure there are plenty such people on this list) should be able to write you a set of tapes from the images on my FTP site. There is even a FORMAT.1600 file there telling you what to put on which tape and in which order. A friend of mine is holding a working TU81 for me and while I would love to get it operational, I don't feel like bringing it into this apartment, especially since I may have to move again in 6 months... MS

23 years, 3 months

1
0
0 0

cctalk digest, Vol 1 #405 - 38 msgs

by sml49＠attbi.com

> Anyone know where I can source the resistive touchpad element for an > Apple Messagepad 2x00 from? > Try posting your inquiry on the MacMarines list; send it to <sarge(a)macmarines.com>, a great resource for all things Apple. ..SML

23 years, 3 months

1
0
0 0

A way to erase OTP components?

by doug_jackson＠citadel.com.au

A UV LED????? (Drops his project planning tools, and kind of wishes he was at the technical coal face once more) I was aware that we have White, and blue (Through Phospor, and funky doping), but these UV devices are new to me... regards Doug Jackson Director, Managed Security Services Citadel Securix +61 (0)2 6290 9011 (Ph) +61 (0)2 6262 6152 (Fax) +61 (0)414 986 878 (Mobile) Web: <www.citadel.com.au> Offices in Melbourne, Sydney, Canberra, Hong Kong, Boston -----Original Message----- From: Bob Shannon [mailto:bshannon@tiac.net] Sent: Thursday, January 23, 2003 10:58 AM To: cctalk(a)classiccmp.org Subject: Re: A way to erase OTP components? I currently work for a company that makes the X-Ray supplies for airport scanners. We have the full X-Ray emitter heads at test loads for the -180KV, 15ma supplies in-house. These scanners place the high voltage under computer control, they don't run at any one preset level. I gather that the operating point shifts as the tubes age, and perhaps also with the material being examined under software control. But crank one of these babies up to full power, and the X-rays will generate very high charge levels in the die and cook the part. The question now becomes, does the date go away before the transistors do? On a related note, I recently erased a (windowed) 27C512 using a UV led. I did'nt think it would work, but it did. Eric Smith wrote: >Bob Shannon wrote: > >>X-rays will erase the part at high energy levels, but this will also >>degrade the part to the point where it >>will fail soon, or die during erasure. >> > >A friend had a large quantity of programmed 27C512 OTP EPROMs, with >contents of no use to him. He tried to erase them using a commerical >X-ray machine, of the type used for inspecting assembled circuit boards >(to check solder joints on BGA packages) and was unable to produce any >noticable change to the part. > >This subject has been discussed on sci.electronics multiple times in the >past, and the consensus was that the frequency of Xrays is such that >they have no direct effect on the stored data. But at very high >exposures it is definitely possible to damage the part. > >Note that the exposure levels used for baggage inspection at airports >is far too low to cause any measurable effect on EPROMs. They are >generally set to substantially lower levels than medical X-rays >equipment. > >The normal erasure procedure for EPROMs is to use short-wave UV light, >nominally at a wavelength of 2537 angstroms (about 254 nm). Unlike the >more common long-wave UV (black lights), this *is* dangerous to your eyes; >never look into the light. The light bulbs and the window on the EPROM >are made from quartz rather than glass, because glass blocks most of the >short-wave UV. Suitable bulbs are commonly sold for germicidal use. > >In the mid-1980s, at least one Japanese semiconductor company offered >plastic windowed EPROMs. The package was a normal epoxy DIP package, >except that a square area in the center was molded from a different >plastic. The window was translucent (not transparent) to visible light. >These were less expensive than the usual ceramic windowed parts, but >more expensive than OTP parts. However, they could only be erased a >small number of times because the plastic window becomes opaque to the >shortwave UV with prolonged exposure. > >I'd heard of these plastic windowed packages at the time, but never >actually saw one until I purchased a coin-op video game board at an >auction. > >Eric > > > > > CAUTION - The information in this message may be of a privileged or confidential nature intended only for the use of the addressee or someone authorised to receive the addressee's e-mail. If you are not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this e-mail is strictly prohibited. If you have received this email in error please notify postmaster(a)citadel.com.au. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of Citadel Securix. Feel free to visit the Citadel Securix website! Click below. http://www.citadel.com.au

23 years, 3 months

2
1
0 0

laptop wanted; toshiba T1100+ questions

by gil＠vauxelectronics.com

Hi folks: A couple of questions: 1) OK, this one is off-topic: Does anyone have an old laptop for sale? I'm looking for a reasonably-priced one with Win98/98se. 2) I recently got a toshiba T1100plus which seems to work well (except for a few stuck pixels). It came with an ms-dos 3.30 disk, which boots it nicely, but I would like to find ms-dos ver 3.2 that it shipped with. Also, when I run format on the machine (with 3.3), it formats the disks to 300-something KB instead of 720KB. Running format /? does not seem to list help info on the 3.3 dos, as it does on other versions I have used. I can format a 720K disk on my win98 desktop machine, but I am wondering why dos 3.3 is formatting to less that the drive can handle. Anyone with Toshiba dos 3.2 out there? thanks, gil ;----------------------------------------------------------- ; vaux electronics, inc. 480-354-5556 ; http://www.vauxelectronics.com (fax: 480-354-5558) ;-----------------------------------------------------------

23 years, 3 months

2
1
0 0

Quasijarus 4.3BSD on 1600bpi magtape

by msokolov＠ivan.Harhan.ORG

Kelly Leavitt <kelly(a)catcorner.org> wrote: > MS: Where can I find the instructions and content? ivan.Harhan.ORG:/pub/UNIX/4.3BSD-Quasijarus0a Since the original enquirer asked for 1600 BPI, you would go by FORMAT.1600. All files on my site are compressed with 4.3BSD-Quasijarus compress(1). The 1600 BPI distribution consists of two tapes (assuming you are using 2400 ft reels). The first tape contains binaries and the second tape contains sources. The tape with binaries must be written uncompressed, and the sources can be written compressed as they are on the FTP site to fit them on one tape. If the machine you will use to write the tapes isn't running 4.3BSD-Quasijarus0a and you don't have an uncompress utility that supports 4.3BSD-Quasijarus compress -s format, you will need to download and compile my compress utility in order to uncompress the binaries: ivan.Harhan.ORG:/pub/UNIX/components/compress.tar MS

23 years, 3 months

1
0
0 0

Thunderware LightningScan

by cb＠mythtech.net

Couple of questions about a Thunderware LightningScan for the Mac. 1: Any one have any idea what the voltage is for the power supply for it? I have on here, but the person I got it from warned me that the power supply he was including might or might not be for it. All he knew is it was the only power supply in the box of stuff with it that fit. The power supply is a wall wart rated at 16v AC, 20vA. Says its made by Condor. 2: Included (and what I actually thought I was getting) is a Thunderscan adaptor for the Imagewriter. It has been a REALLY long time since I used one, but I recalled it being a drop in replacement for the ribbon, and it connected inline to the serial port. So you connected the Thunderscan to the Mac, and the Imagewriter to the box on the cord for the Thunderscan. The one I have jives with that, but connected to the end of the serial connector is another box that looks like it would connect to the Drive port, and then to a Mini-Din 8 serial port. This box is removable, so it might not belong for all I know (it is labled "Thunderscan", so it must at least go to one of their products) What is this other box. Is it just a converter for use with din 8 serial ports? If so, why the connector for the Drive port? (The one I used in the past was on a 512K, and I don't remember this box being part of the setup, but then it would have connected to a DE-9 serial port which is what the Scanner head cable terminates to). 3: What is the LightningScan box for? Is this part of a different scanner? I'm sure this box was not part of the setup I used in the past. It appears to have SCSI ports on it (two DB-25 ports and a push button number selector). There is a mini-din 8 on this box. Is that odd adaptor to hook up to this box? The din 8 cable looks kind of short to be used with this box and have it connect to the drive port AND the box connected to the SCSI port. (The box is too small to be a zero footprint device that sits under the Mac, and the din 8 pigtail is only about 5 inches long, enough to reach to the serial port on the Mac, but not enough to reach to the outside of the mac to connect to the front of the LightningScan box where the din 8 port is). I did a bit of googling, and it looks like the LightningScan box was for a hand scanner, so it might not go to the Thunderscan at all. But that other drive port looking adaptor box has me stumped. Anyone able to shed some additional light on this stuff? -chris <http://www.mythtech.net>

23 years, 3 months

1
0
0 0

Quasijarus 4.3BSD on 1600bpi magtape

by kelly＠catcorner.org

Depending on where you would need it shipped, I'd try making one for you. I couldn't find the FTP site, but if given the file specifics, I've got a T1 available for the download too. MS: Where can I find the instructions and content? I'll read them over and see if my tape drive will do what is needed. It is pretty versitile. I use it to read and convert tapes from all kinds of systems. Kelly -----Original Message----- From: msokolov(a)ivan.harhan.org [mailto:msokolov@ivan.harhan.org] Sent: Wednesday, January 22, 2003 1:41 AM To: cctalk(a)classiccmp.org Subject: Re: Quasijarus 4.3BSD on 1600bpi magtape jwillis(a)dahmer.vistech.net wrote: > Does anyone know of a source for Quasijarus 4.3BSD on 1600bpi magtape? (TU80) Anyone with a 9-track tape unit (I'm sure there are plenty such people on this list) should be able to write you a set of tapes from the images on my FTP site. There is even a FORMAT.1600 file there telling you what to put on which tape and in which order. A friend of mine is holding a working TU81 for me and while I would love to get it operational, I don't feel like bringing it into this apartment, especially since I may have to move again in 6 months... MS

23 years, 3 months

1
0
0 0

A plea to classiccmpers

by doug_jackson＠citadel.com.au

Here in Australia, STD calls (over 50km?) are billed per minute. My understanding is that our entire population (approx 14 mill) is equivalent to that of New York. Unfortunately (from an infrastructure perspective) this population is spread over an area the size of the USA. This means that telecoms costs are high. This is not actually a problem for net connections here, as most national ISP's provide a 'local call' number to dail. Doug Jackson Director, Managed Security Services Citadel Securix +61 (0)2 6290 9011 (Ph) +61 (0)2 6262 6152 (Fax) +61 (0)414 986 878 (Mobile) Web: <www.citadel.com.au> Offices in Melbourne, Sydney, Canberra, Hong Kong, Boston > -----Original Message----- > From: acme(a)ao.net [mailto:acme@ao.net] > Sent: Thursday, January 23, 2003 8:03 AM > To: cctalk(a)classiccmp.org > Subject: Re: Re: A plea to classiccmpers > > > From: Daniel Hicks <danielrhicks(a)hotmail.com> > Date: 01/22/2003 1:37 PM > > > > > Pay by the minute for connection time? You're getting screwed. > > > > I beg your pardon. I live in the USA. However, in many > parts of the world, > all telephone calls are metered. > > This is *not* a USA-only list. > > Later -- > > Glen > 0/0 > > > > > > > > > > > > > > > > > > > > > > CAUTION - The information in this message may be of a privileged or confidential nature intended only for the use of the addressee or someone authorised to receive the addressee's e-mail. If you are not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this e-mail is strictly prohibited. If you have received this email in error please notify postmaster(a)citadel.com.au. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of Citadel Securix. Feel free to visit the Citadel Securix website! Click below. http://www.citadel.com.au

23 years, 3 months

1
0
0 0

BBC Micro - assemblers - info needed

by pete＠dunnington.u-net.com

On Jan 22, 12:45, dave(a)cirt.net wrote: > Quoting pete(a)dunnington.u-net.com: > > On Jan 18, 16:16, Philip Pemberton wrote: > > > > > Finally, does anyone know how some discs were formatted so they were > > > compatible with 40-track and 80-track disc drives? > > The way Acorn did that with things like the Master 128 Welcome Disc was to > > make all the directory entries (on track 0) point to tracks between 5 and > > 9, and 20 and 39. Track 20 on a 48-tpi drive is where track 40 would be on > > a 96-tpi drive: > > One has to be very careful with the formatting - there where several different > FS formats - some with varying compatibility. (Talking about the file system > side here) The Master welcome disc used ADFS which was slightly more advanced > than the more common DFS that was used on the earlier Acorns. Yes, I'm aware of that. The Master Welcome Disc appears to the system as an ADFS S disc (S means "small format", 160K), ie as 40-track single-sided disc. It just happens to be made in such a way as to be readable in 40-track and 80-track drives. I created a few discs like that at the time. I did it by hand, but I believe eventually someone made a utility or ROM to do it. Now if you think that's wierd, how about the disc I have (also for a BBC) that has three separate sets of data on it, all in DFS format? -- Pete Peter Turnbull Network Manager University of York

23 years, 3 months

1
0
0 0

Apollo DN 4500 looking to be saved from computer recycler

by vcf＠siconic.com

It's located near Rochester, NY. Information below. Reply to original sender. Reply-to: <amacur(a)frontiernet.net> ---------- Forwarded message ---------- Date: Wed, 22 Jan 2003 16:29:05 -0500 From: Alexander G. Macur <amacur(a)frontiernet.net> Subject: RE: Apollo DN 4500 looking to be saved from computer recycler I have a vintage Apollo DN4500 including 19" monitor looking for a home I also have all the HP/Apollo docs & software (although I doubt the DC600A tapes would be readable) I also have lots of DC600A tapes but my guess is after 10+ years the media would have deteriorated. Its in Webster (Rochester) NY. When I moved from Syracuse to St Louis in 1993 I hooked it up and it booted to the Apollo Domain/OS prompt. I didn't bother to unpack it when I moved from St Louis to Rochester. -- Sellam Ismail Vintage Computer Festival ------------------------------------------------------------------------------ International Man of Intrigue and Danger http://www.vintage.org * Old computing resources for business and academia at www.VintageTech.com *

23 years, 3 months

1
0
0 0

A plea to classiccmpers

by acme＠ao.net

From: Daniel Hicks <danielrhicks(a)hotmail.com> Date: 01/22/2003 1:37 PM > > Pay by the minute for connection time? You're getting screwed. > I beg your pardon. I live in the USA. However, in many parts of the world, all telephone calls are metered. This is *not* a USA-only list. Later -- Glen 0/0

23 years, 3 months

1
0
0 0

amstrad pcw available

by classiccmp.org＠irrelevant.fsnet.co.uk

Hi.. is an Amstrad PCW (8512 I think) c/w printer of interest to anybody. From memory, it's a CP/M machine, but uses stupid little 3" discs (not 3.5") and originally came with a boot-up-into-wordprocessor disc... It's currently in my neigbours front yard waiting for the bin men, but I've a mind to rescue it. Apparently it works fine, just needs a new fuse. It's in Salford, England, btw .. Rob.

23 years, 3 months

5
5
0 0

A plea to classiccmpers

by cb＠mythtech.net

>Besides, at modem speeds, who WANTS to retrieve a 100K message that only >has a paragraph of new content? Could be worse... this comes to mind only because as I read your message, I noticed a new email coming down from one guy that I want to strangle. I am on a mailing list for state surplus property so my Fire Deparment knows when good stuff comes in. The guy that sends out the notices keeps taking digital pics of the stuff, and importing them into MS Word documents before sending them as attachments. So he takes what would be a 50k JPEG, and turns it into a 2.5 MB word doc... just so I can take a look at whatever he is hocking that day (today it was a GMC dump truck). Even on DSL, downloading a 2.5 MB file to look at one picture is annoying! -chris <http://www.mythtech.net>

23 years, 3 months

1
0
0 0

BBC Micro - assemblers - info needed

by pete＠dunnington.u-net.com

On Jan 18, 16:16, Philip Pemberton wrote: > Finally, does anyone know how some discs were formatted so they were > compatible with 40-track and 80-track disc drives? The way Acorn did that with things like the Master 128 Welcome Disc was to make all the directory entries (on track 0) point to tracks between 5 and 9, and 20 and 39. Track 20 on a 48-tpi drive is where track 40 would be on a 96-tpi drive: 96tpi 0 5 9 19 20 39 40 59 60 79 | | | | | | | D |X| |XXXXXXXXX| | | |__|_|____|_________|_________|_________| | | | | | | D |xxxx| |xxxxxxxxx|xxxxxxxxx| | | | | | | 48tpi 0 4 5 9 10 19 20 29 30 39 So you need to format parts of the disk as if they're 40-track and parts as if they're 80-track. Start by formatting the disk normally, at the density-of-your-choice. Next, write some dummy files that will occupy exactly tracks 0 (less the directory area) to 4, 5 to 9, and 9 to 19, and then delete the dummy that is in the space 9 to 19. You only need to do this for one density, thankfully, as the object is just to get the right placeholders in the space map. Then write the real data. Switch densities, format the tracks that need to be the alternate density (Disc Doctor can do this), and write the real files again. You may need to do the second set of writes with raw disk access, as IIRC ADFS will "overwrite" a file by writing a new version andf then deleting the old one -- which is not what you want because it will use the wrong space! -- Pete Peter Turnbull Network Manager University of York

23 years, 3 months

3
2
0 0

A plea to classiccmpers

by cb＠mythtech.net

>Before we got DSL at work (we're about 17K feet from the CO) we had to get by >with a Dialup. Good old PacBell charged us about a penny a minute... DSL @ >$99.00 a month is actually cheaper... We actually has a similar thing here... I had been trying to get DSL put into the budget for months, and accounting kept saying no. Despite all the added benifits it would bring us, they didn't want the $250 a month price tag that I was proposing (this was early DSL, before you could get it dirt cheap, I was one of the first in my area to get it). So I was smart. I pulled out the last few months phone bills to show the cost we were paying to have our "unlimited" dialup line connected all day. It was connected to the network, and we were running a mail server, so the only time it hung up was after 11pm, and then it went to connecting once an hour to update the mail server, until 8am when it came back up full time again. Showing them three months of $450 line charges got my $250 a month DSL put onto the budget with no further complaints. -chris <http://www.mythtech.net>

23 years, 3 months

1
0
0 0

A plea to classiccmpers

by cb＠mythtech.net

>Pay by the minute for connection time? You're getting screwed. Maybe they are, but from what I gather, that is not unusual outside the USA. Even here in the USA, if you are on a dialup connection, and calling from a business... guess what, you are probably paying by the minute. Most business lines in the USA are billed per minute of connect time (or worse, by the "message unit"). -chris <http://www.mythtech.net>

23 years, 3 months

2
1
0 0

Toshiba laptop wanted (previously?)

by jwest＠classiccmp.org

I had posted a while back about wanting a Toshiba 3100 laptop.... I think someone replied with one I could have, but I can't find that email anywhere. Long and short of it is I need something along the lines of a 286 or so, that is small enough to fit easily on my electronics bench, and has one ISA slot, preferrably two. I was thinking the Toshiba 3100 was pretty close to this. Can the original person who responded please get back to me, or does someone else have something close? I'm wanting to put an HP-IB card in the unit to interface with my test gear, and possibly a wireless card or at least an ethernet port (I could get the ethernet port with a zircom parallel port adapter that I have)... Thanks! Jay West --- [This E-mail scanned for viruses by Declude Virus]

23 years, 3 months

1
0
0 0

PET 2001 Oddity 6550 Unobtainiums MOS TECHNOLOGY

by kandres＠epssecurity.com

Eric, Yes, you are correct. My fault. I've always mixed up MOSTEK and MOS Technology. It seems I remember that the MOS Technology folks left Motorola because of the way the 6800 was progressing, but that could be a faintly remembered rumor also. MOS Technology was responsible for the 6550 ram. I seem to remember having a book from 82 or 83 from MOS Technology somewhere. Kev --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.445 / Virus Database: 250 - Release Date: 1/21/2003

23 years, 3 months

1
0
0 0

A plea to classiccmpers

by Fred.van.Kempen＠microwalt.nl

Daniel Hicks writes: > Pay by the minute for connection time? You're getting screwed. Yes. Thanks for letting us know. This has been common practice since forever in Europe, and many other parts of the world. --f

23 years, 3 months

1
0
0 0

VAX VMS Question

by Fred.van.Kempen＠microwalt.nl

Yes. On the 2950, set the port to 10Mbps, half-duplex, no flow control, no spanning tree: int fastethernet 0/xxx speed 10 duplex half flow none spanning-tree portfast no shutdown or somesuch. The Cisco ASIC's hate the VAX ethernet port, same here on my 4000. Basically, the ether connection is bouncing between between various modes, making it slow and such. --fred

23 years, 3 months

1
0
0 0

TI (Texas Instruments) Silent 700 Model 725, their 1st portable data terminal (circa 1971)

by collison＠cnri.reston.va.us

How to find an interested buyer? - I know Ebay, but that is a 7 day window for what I would presume to be a small audience of interested parties - and how to value/price it? This was my personal unit, last used in the late 70s to access the then ARPANET. Still powers up. Very Good condition. This was TI's 1st Silent 700 portable data terminal (they produced the 1st Silent 700 in 1969, but not a portable) - per TI's web site - is this collectible?

23 years, 3 months

1
0
0 0

A way to erase OTP components?

by dwightk.elvey＠amd.com

>From: "Arno Kletzander" <Arno_1983(a)gmx.de> > >Hello everybody, this is something I've been wondering about for some time >now. Perhaps here is the place to ask, since it's about one of the "inner >secrets of silicon": > >Tony Duell wrote: >> The 8751 is the EPROM version of the 8051 microcontroller. It's otherwise >> identical to it. >> >> If it's in a ceramic package with a quartz window, then you can erase it >> like any other EPROM and reprogram it. If it's in the plastic package, >> then it's the OTP version. > >If in fact the same die was used in both components, then it's only the >plastic (which is impenetrable to the commonly-used ultra-violet light) that >prevents the OTP variant from being erased and reprogrammed. > >However, there are kinds of radiation similar to light which *will* >penetrate the plastic housing...you see where this goes? Will the memory be erased >when you, say, X-ray the OTP component, will it stay unaffected, or is the >thing just going to die? > >(just outta curiosity) > >Arno Kletzander > Hi The trick is impart just enough energy to the electrons to get them to tunnel through the insulation. If you start hitting things too hard, you'll start to damage the crystal structure. UV light will both penetrate into the floating gates and react with the desired amount. One could use x-rays to erase the chip but you'd need an intensity that is great enough that it would also damage the chip. The amount of x-ray energy captured by the gate in a normal x-ray picture is quite small. Since x-rays go through greater depths without reacting and have higher energies, they will most likely damage the chip while erasing the charge on the gates. Materials change the amount of transparency at differing frequencies of electromagnetic energy. UV is just right to penetrate the silicon oxide cover and be absorbed by the poly-silicon gates. It is interesting that the flight at high altitudes is probably more damaging to electronics than the inspection x-ray at the gate. Dwight

23 years, 3 months

1
0
0 0

Dear Santa, I would like a VAX

by Fred.van.Kempen＠microwalt.nl

> And, if you have a lot more money available: (just came up on > comp.sys.dec.micro) > > http://www.aub.nl/vaxsales/ > > a 3100-85 for 600 (money units not specified) > a 3100-80 for 500 > both for 1000. Each includes 3 VT510+keyboard. One includes a CD. These guys are impossible to deal with. I have been working with them since, uhh, September last year to get this lot from them, and have dropped the deal since, as they're being impossible. The money units are in EURo's, I would assume. They first wanted to just get rid of the stuff, then someone changed their mind, and now they seek to get as much cash off it as possible. Beware. --fred

23 years, 3 months

1
0
0 0

Reply to: Slightly OT: Need a new touchscreen for an Apple MP2x00

by nerdware＠ctgonline.org

Come on over to www.newtontalk.net. Lots of guys with parts sources and the know-how to fix it. Very useful source of info for us Newton guys. You'd be surprised at the amount of development still going on for the Newt... Paul ORIGINAL MESSAGE FOLLOWS: HI, Anyone know where I can source the resistive touchpad element for an Apple Messagepad 2x00 from? Tim.

23 years, 3 months

1
0
0 0

oric - 1

by keith.burke＠xilinx.com

Rob, I read your little piece on the web about your british micros. Do you still own the Oric-1? I used to have one as a kid and now that I'm a computer science graduate I thought I might try and get my hands on my first computer. I've chucked the old one long ago... it gave up on us after a pretty rough time in my house. Do you happen to know where I might find one? Keith -- / 7 /_( |_| |_| |_| |_| /\ /\|=|/ / \ |_| / ) _ \ / |_| \ / -=-o / \ /~\_/ \/

23 years, 3 months

1
0
0 0

Ressurecting Mac Plus

by tim.myers＠sunplan.com

Hi all, I've got a Mac Plus I got of Ebay some time ago. Anyone any idea how I can (legally) obtain an OS for it? I'd like to add a HDD to it; I've an old 600Mb in an external box lying around, am I going to be able to use this (even if I only get a 20/40/80Mb partition on it I'm a happy chicken.). Tim.

23 years, 3 months

5
5
0 0

Quasijarus 4.3BSD on 1600bpi magtape

by msokolov＠ivan.Harhan.ORG

Ethan Dicks <erd_6502(a)yahoo.com> wrote: > Is there a "toggle-in" VAX bootstrap for a TS-11 or TU-80 or for > anything for that matter? There are 5 different toggle-in bootstraps. TS-11 is one of them. As I understand it, TU80 looks like a TS-11 to software, so the original enquirer who was asking about TU80 should be all set. > Between 1984 and 1994, I installed a lot of > operating systems on PDP-11s and VAXen, and my experience is that > for VAXen, the magtapes were never bootable - you booted a console > floppy/tape/disk pack/whatever that had drivers for pre-TMSCP > tape drives (MT and MS) and you told the standalone programs which > disk to copy to and which tape to copy from (our primary machine > at work had a MASSBUS-attached TU-78 and a Unibus-attached TU80 - I > kept the TU-80 ;-) That is how it works with DEC OSes. It is also one option with BSD. BSD, however, offers another option, using only the magtape. Of course on the original big VAXen the magtapes were not "bootable", but Appendix B of Installing and Operating 4.3BSD UNIX on the VAX (SMM:1) contains little programs in hex that you can type into memory from the console (called toggle- in programs in reference to toggle switches that predated the console). There is a different version for each kind of tape controller. Each program is to be entered at 200 and run with certain registers manually set to the controller CSR address, etc. Each time you run one of these programs, it reads one 512- byte record from the magtape at 0 and halts. The first file on the 4.3BSD distribution tape had 512-byte records and the first 5 of them were secondary tape bootstraps for different tape controllers. You would run your toggle-in program with S 200 the right number of times to load the right secondary bootstrap and then run the latter with S 0. It would give you a = prompt at which you type the name of the standalone program you want to run. These standalone programs are stored in the first file on the tape after the secondary bootstraps, and the secondary bootstrap programs load them. Between the 5 secondary bootstraps (5 512-byte records) and the tp archive with standalone programs (in the same tape file also with 512-byte records) there were two unused records. I took advantage of this in 4.3BSD-Quasijarus0a to add MicroVAX booting ability to the same tape without breaking the big VAX boot mechanism described above. The MicroVAX tape boot program is 1024 bytes long and neatly fit in the room that was left, but because MicroVAXen boot automatically using their ROMs unlike the manual process above, the MicroVAX boot program had to be first. To satisfy this requirement I simply rearranged the order: now the MicroVAX bootblock is first, followed by the 5 big VAX secondary bootstraps, followed by the tp archive with standalone programs. The big VAX booting mechanism still works with the 4.3-QJ0a tape just like with the original 4.3, the only difference is that because the secondary bootstraps are now two records further down the tape, you type S 200 two more times than the manual says. > Things changed a bit with MicroVAXen - early OS kits assumed RX50, later > ones assumed TK50, but never magtape. To the software there is absolutely no difference between TK50 and magtape as long as both speak TMSCP. TMSCP magtapes are bootable on MicroVAXen just like TK50s. This is the reason why I do not make separate dist tapes for big VAXen and MicroVAXen, the same tape is used for both and you write magtapes and TK50s in exactly the same way from the same files on my FTP site. > > I've added two blocks for MicroVAX booting in front of the first file on > > the dist tape, but didn't update the Installing and Operating manual... > > You will probably have to cruft up something close to that, but one > aware of the 11/750 if you are going to make a bootable magtape. I don't need to cruft anything up: for big VAXen nothing changed except the order of boot blocks, and I simply need to update the manual to increment by 2 the number of times one types S 200. I'll do that in the 4.3-QJ0b release. MS

23 years, 3 months

1
0
0 0

Pinout for HP 2629b terminal?

by jimw＠agora.rdrop.com

subject says it all... Looking for the comm port pinouts. Thanks; -jim --- jimw(a)agora.rdrop.com The Computer Garage - http://www.rdrop.com/~jimw

23 years, 3 months

1
0
0 0

Heathkit H-11A (LSI-11) on eBay

by Fred.van.Kempen＠microwalt.nl

Damn, and I had one, complete, a long time ago... threw it out when I finally got a "real" PDP-11. *bonks head against wall* stoopid, stoopid.. --fred > -----Original Message----- > From: Hans Franke [mailto:Hans.Franke@mch20.sbs.de] > Sent: Wednesday, January 22, 2003 4:09 PM > To: cctalk(a)classiccmp.org > Subject: Re: Heathkit H-11A (LSI-11) on eBay > > > > > Does anyone on the list have any PDP-11 papertape? I don't mind > > > image files of the data - I have punches and blank tape. > > > No, but if anyone is feeling particularily insane or rich, I'll sell > > a Heathkit H10 paper tape system for $1000 ;) I dont have anything I > > can use it with. > > Well, I love to add a H10 to my H8, but somehow the one(s) > and zeros got mixed up in your nibble. > > Gruss > H. > > -- > VCF Europa 4.0 am 03./04. Mai 2003 in Muenchen > http://www.vcfe.org/ >

23 years, 3 months

1
0
0 0

Any Cromemco USERS?

by mhstein＠canada.com

-------------------Original Message-------------------------- From: "Bill Sudbrink" <wh.sudbrink(a)verizon.net> To: <cctalk(a)classiccmp.org> Subject: RE: Any Cromemco USERS? Date: Mon, 20 Jan 2003 14:31:19 -0500 Reply-To: cctalk(a)classiccmp.org > Just curious; is anybody actually using a Cromemco system > out there, running either CDOS, Cromix or Unix? Or does > anyone at least have one in running condition? I have an IMSAI chasis stuffed with cromemco boards. I run CP/M on it... but I don't think there would be a reason it wouldn't run a cromemco OS. It has a CPUZ, a 16FDC, a 64KZ and a TU-ART in it. ---------------------------------------------------------------------- No, unless there are some unusual mods, I'd think that a set of Cromemco boards would run a Cromemco OS just fine. BTW, I assume you mean a ZPU? I'd be interested in knowing how you got CP/M onto the Cromix diskettes and configured for its memory model? TM100 drive(s) I assume? One of my systems is in a Vector chassis, because it's easier to work on and the fans are quieter. Anyway, just curious; always surprised me that there seem to be so few Cromemco fans and how little info there seems to be, especially about the later Unix models which could give DEC a run for their money. Just wanna swap tales I guess. Thanks, mike

23 years, 3 months

2
2
0 0

Heathkit H-11A (LSI-11) on eBay

by Gary.Messick＠itt.com

> From: Ethan Dicks [mailto:erd_6502@yahoo.com] > Sent: Tuesday, January 21, 2003 5:32 PM > To: cctalk(a)classiccmp.org > Subject: Re: Heathkit H-11A (LSI-11) on eBay > > > > --- Steve Jones <classiccmp(a)crash.com> wrote: > > Be interesting to see what happens with this: Heathkit H-11A > > (DEC LSI-11) with no peripherals but lots of manuals and some > > software on paper tape and 8" floppy. > > Wish I had the docs... got the box, but virtually nothing on paper. Ethan, as you probably know I have an almost complete set of Docs for my H-11. I have all the peripheral cards manuals, HT-11 V2 Docs (Maybe even V1.) H-27 disk system with docs, and HT-11 disks. I haven't got it back running yet (haven't had time lately.) so I don't know the state of the disks. If anyone needs any manual scans, or other info on the H-11, drop me a line, I'd be happy to help. I DID throw away my H-10 punch, and all the software/docs when I got my disk. DOH! Live and learn! > > I do have at least one unassembled Heath I/O card (and several that > _are_ assembled). > > Gotta spend some time twiddling with the H27 disk controller. I > _think_ I have it sussed out at last. It works fine with an RXV11 > and an RX01, but I've had nothing but troubles getting the Heath > disks working. > > > Hey, the Buy It Now price is a very reasonable US$6,900! ;^) > > Hold me back! :-) > > I notice that the bid is nearly up to $1K. > > Does anyone on the list have any PDP-11 papertape? I don't mind > image files of the data - I have punches and blank tape. > > -ethan > > > __________________________________________________ > Do you Yahoo!? > Yahoo! Mail Plus - Powerful. Affordable. Sign up now. > http://mailplus.yahoo.com > ************************************ If this email is not intended for you, or you are not responsible for the delivery of this message to the addressee, please note that this message may contain ITT Privileged/Proprietary Information. In such a case, you may not copy or deliver this message to anyone. You should destroy this message and kindly notify the sender by reply email. Information contained in this message that does not relate to the business of ITT is neither endorsed by nor attributable to ITT. ************************************

23 years, 3 months

1
0
0 0

For trade

by fauradon＠frontiernet.net

Hi gang, I need to make room (don't we all) I have a 5110, 5103, 5114 trio with documentation. The 5110 is believed to be non-working, I get garbage on the display when turned on. The display changes when switches a toggled but I was unable to get it to behave like a normal computer. I have a troubbleshooting guide that when followed says replace video card (Got a spare?). I have a bunch of documentation for it and a few floppies. I think it is a 32K basic system (no tape). I would love to replace it with * W0W RaRe*(TM) flavors of pocket computers or programmable calculator (c programmable like the casio 2000 currently on ebay with the 3 1/2 disk interface would be very sweet, HP 16c would be nice too). Or other cool small items I'm also into console collecting( 3do, CDI, CDx, Lynx, jaguar) ... I am pretty open to any suggestions or offers. Of course you would have to pick up shipping from Minnesota (hefty given the size of the disk drive and the printer) I will gladly forward pictures to any interested party. Thank you Francois PS: I will not separate the items. ---------------------------- Because you know how to operate a vehicle doesn't necessarily mean that you know how to drive....

23 years, 3 months

2
2
0 0

Slightly OT: Need a new touchscreen for an Apple MP2x00

by tim.myers＠sunplan.com

HI, Anyone know where I can source the resistive touchpad element for an Apple Messagepad 2x00 from? Tim.

23 years, 3 months

1
0
0 0

Help for Obedient Husbands (was: Free stuff)

by loedman1＠juno.com

My collection of computers and related parts currently fills two bedrooms of a three bedroom house and is now extending into the front room. My Wife has earned the capital W by doing nothing more than sighing softly as I enter the house with my latest treasures. The only time she ever complained was when I was porting a set of Olds 455 heads in the front room (Hey it was cold outside <grin>) Rich >> The following hard drives were delivered to me yesterday, much to my >> Wife's dismay, and are looking for homes. All are supposed to function From: "R. D. Davis" <rdd(a)rddavis.org> >Oooohhh! ...does she makes you capitalize the 'W' in wife? ...poor >chap. :-( Perhaps you need to find her a new home instead, and keep >the hard drives, as you never know when you may need them. Or, you >could keep her as well as the drives, but you may need the help of an >assertiveness training course for that option... I think that an >organization called OHA (Obedient Husbands Anonymous) may be able to >help you. ;-) Best of luck! >> Also received a bunch of miscellaneous chips and cards that I need to >> sort and identify that will be available >See above. You may be able to keep those as well...

23 years, 3 months

2
1
0 0

What's better than canned air?

by pete＠dunnington.u-net.com

On Jan 21, 13:27, Chad Fernandez wrote: > John Lawson wrote: > > use a good regulator on your compressor, turned down to 15 or 20 PSI, and > > use a blow gun attachment with side relief holes and a rubber tip. > > Why so low? If I'm using a compressor, I usually set it to 80psi. No > problems yet! I'm not exactly cleaning core memory though. On some boards, you might just damage something. That's certainly too high for relay coils and such. You stand a good chance of ripping off labels, too. More importantly, if it does rip something off, or frees some grit, the debris will come flying off at high speed, which is rather dangerous. Of course, it all depends on how far he nozzle is from the board. However, if you're holding it some distance away to reduce the pressure, you'd save air and electricity by lowering the pressure instead. -- Pete Peter Turnbull Network Manager University of York

23 years, 3 months

2
1
0 0

PET 2001 Oddity 6550 Unobtainiums

by pete＠dunnington.u-net.com

If people are replying to this thread, could they PLEASE TRIM what they quote. I got a pile of messages, all exceeding 50K bytes, and I really don't need the whole digest (which is what's on the botom of the message). -- Pete Peter Turnbull Network Manager University of York

23 years, 3 months

1
0
0 0

Quasijarus 4.3BSD on 1600bpi magtape

by msokolov＠ivan.Harhan.ORG

Clayton Frank Helvey <msspcva(a)yahoo.com> wrote: > Mike, FYI this is what John wrote... Thanks for translating! John Willis <jwillis(a)arielusa.com> wrote: > Awesome. I don't have the drive yet, but it seems to > me to be the best > option for getting BSD loaded on my VAX 11/750. It's the only proper way! Are you going to load the copy and boot standalone programs from the first file on the magtape or from TU58? The first option is obviously easier, although I do have an image from which you can write the BSD install TU58. But if you are going with the first option, your tape drive on the 750 must be non-TMSCP, as there is no toggle-in bootstrap for TMSCP. Also in 4.3-QJ0a I've added two blocks for MicroVAX booting in front of the first file on the dist tape, but didn't update the Installing and Operating manual, so when you follow the instructions in Appendix B for your tape flavor, mentally increment by 2 the number of times you type "S 200". MS

23 years, 3 months

2
1
0 0

KayPro II with original boxes

by vcf＠siconic.com

Here is someone in Milo, Maine, with a KayPro II and all the trimmings. Please contact the original sender. Reply-to: <tinker(a)kynd.net> ---------- Forwarded message ---------- Date: Tue, 07 Jan 2003 15:46:41 -0500 From: Tinker <tinker(a)kynd.net> To: Vintage Computer Festival <vcf(a)siconic.com> Subject: Re: K_PRO II X I have a K Pro 11 x with all disks and books as well as the daisy wheel printer plus the boxes they came in. Any interest in them. Its in Milo, Maine. o4463 -- Sellam Ismail Vintage Computer Festival ------------------------------------------------------------------------------ International Man of Intrigue and Danger http://www.vintage.org * Old computing resources for business and academia at www.VintageTech.com *

23 years, 3 months

2
1
0 0

Any Cromemco USERS?

by mhstein＠canada.com

-------------------------Original Message------------------- Date: Mon, 20 Jan 2003 11:13:49 -0800 (PST) From: Sellam Ismail <foo(a)siconic.com> To: "'ClassicComputers'" <cctalk(a)classiccmp.org> Subject: Re: Any Cromemco USERS? On Mon, 20 Jan 2003, M H Stein wrote: > Just curious; is anybody actually using a Cromemco system > out there, running either CDOS, Cromix or Unix? Or does > anyone at least have one in running condition? I have a System/One in running condition (last I checked) running Cromix >from the harddrive. I have two actually. One was exhibited at the first VCF but because of all the moving the hard drive got crashed :( To my knowledge, the other one is still running, but I haven't fired it up in years. Sellam Ismail Vintage Computer Festival ---------------------------------------------------------------------------------------------------- Well, you don't count, Sellam; you've got at least two of everything. If that System/One has the 5Mb IMI drive, as most of them did, those drives had a very common problem with the index sensor moving, very easy to adjust. If & when I send you that pile of books & manuals, I'll include a copy of the relevant service bulletin, in case you feel like looking at it some day. Gonna copy it right now and add it to the pile before I forget. mike

23 years, 3 months

2
1
0 0

PET 2001 Oddity 6550 Unobtainiums

by kandres＠epssecurity.com

Witchy, Thanks for the input. My problem with the "Unobtainiums" is that not only were they MOSTEK chips with their own pinout, they were that nonstandard half again as big dip size, which meant that you couldn't even come up with a carrier to bodge together a replacement of something newer. Thus, I collected the CD6264 rams and am looking at those for replacements. As to the request for the reset I used, standby, I am getting together a jpeg of it, and will send it under separate cover. From memory, it was a form C momentary button with button guard that I drilled a hole for in the Blue Banner at the far right. Long wire from there to the circuit board because of the hinged top case. Smarter thing would have been to mount it under the lip on the side of the case, but I was young and in a hurry right then and tired of powering off. Kev -----Original Message----- From: cctech-request(a)classiccmp.org [SMTP:cctech-request@classiccmp.org] Sent: Monday, January 20, 2003 11:48 PM To: cctech(a)classiccmp.org Subject: cctech digest, Vol 1 #324 - 14 msgs Send cctech mailing list submissions to cctech(a)classiccmp.org To subscribe or unsubscribe via the World Wide Web, visit http://www.classiccmp.org/mailman/listinfo/cctech or, via email, send a message with subject or body 'help' to cctech-request(a)classiccmp.org You can reach the person managing the list at cctech-admin(a)classiccmp.org When replying, please edit your Subject line so it is more specific than "Re: Contents of cctech digest..." Today's Topics: 1. Found a NCR system 3400 BoatAnchor (WiIdcats(a)aol.com) 2. Re: SGI Discussions? was Re: Mac SE/30 accessories availability? (Dave McGuire) 3. RE: Core memory speeds (Charles Ader) 4. RE: PET 2001 Oddity - 6550 unobtainium! (Witchy) 5. RE: Dear Santa, I would like a VAX.... (Witchy) 6. RE: Dear Santa, I would like a VAX.... (Fred N. van Kempen) 7. Re: Wanted : Pinouts for 9311, 93L14, 8273 chips (Peter C. Wallace) 8. Re: Dear Santa, I would like a VAX.... (Kevin Handy) 9. Re: Any Cromemco USERS? (Sellam Ismail) 10. Need manuals for Electrim EDC-1000 and Dycam Model 1 ($$$) (Vintage Computer Festival) 11. RE: Any Cromemco USERS? (Bill Sudbrink) 12. DOS1.0, 3.20, and the like... (Ed Tillman) 13. Re: Core memory speeds (Jos Dreesen / Marian Capel) 14. RE: PET 2001 Oddity - 6550 unobtainium! (Ethan Dicks) --__--__-- Message: 1 From: WiIdcats(a)aol.com Date: Mon, 20 Jan 2003 12:25:21 EST Subject: Found a NCR system 3400 BoatAnchor To: cctech(a)classiccmp.org Reply-To: cctech(a)classiccmp.org --part1_16f.1975eb72.2b5d8b01_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit did you ever sell this boat anchor? i have one i want to sell also. -Johnny --part1_16f.1975eb72.2b5d8b01_boundary Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: 7bit <HTML>did you ever sell this boat anchor? i have one i want to sell also. -Johnny</HTML> --part1_16f.1975eb72.2b5d8b01_boundary-- --__--__-- Message: 2 Date: Mon, 20 Jan 2003 13:55:55 -0500 Subject: Re: SGI Discussions? was Re: Mac SE/30 accessories availability? Cc: Classic Computer Talk <cctalk(a)classiccmp.org> To: cctech(a)classiccmp.org From: Dave McGuire <mcguire(a)neurotica.com> Reply-To: cctech(a)classiccmp.org On Monday, January 20, 2003, at 09:59 AM, David Holland wrote: > Anyone got a PIC programmer they'd use for me? :-) I may be looking > to have someone program a couple of 16F28's here real soon. I have PIC programming capability here, and would be happy to burn some chips for you. -Dave -- Dave McGuire "She's a cheek pincher. I have scars." St. Petersburg, FL -Gary Nichols --__--__-- Message: 3 Subject: RE: Core memory speeds Date: Mon, 20 Jan 2003 16:26:50 -0800 From: "Charles Ader" <Charles(a)socketcom.com> To: <cctalk(a)classiccmp.org> Reply-To: cctech(a)classiccmp.org > -----Original Message----- > From: Jos Dreesen / Marian Capel [mailto:jos.mar@bluewin.ch] > Sent: Monday, January 20, 2003 12:10 PM > To: cctalk(a)classiccmp.org > Subject: Re: Core memory speeds > > > On Monday 20 January 2003 12:02 am, ben franchuk wrote: > > Since I am building a classic TTL style computer, > > what was the access and cycle time of core memory > > before it vanished and just when did it do that? > > Also when did 74LS come out? I am aiming for late > > 70's early 80's time frame here since this looks > > to be the transition stage from the the old to > > the new. Ben > > > My 1975 core memory products catalogue ( Philips components ) > lists modules with cycle times ranging from 0.65 to 1.5 us, > both for 8kx18 stacks. > > My newest core memory stack sits in my Philips P856 : > dated 1980, cycle time unknown. > > My own TTL computer, dated 1986, just uses 8kx8 SRAMs...... > > > Jos Dreesen > With core memory the general rule was the smaller the donut the faster the cycle. The real limiting factors have always been the physical size of the array of cores. The plane, a mat of wires with little teeny-tiny ferrite donuts at each intersection, looks electrically like a lot of inductors all strung in series. This is a good configuration for a low pass filter that we are going to put a very fast pulse through. The bottom line of all this is that even fast core memory tends have around 0.490us write cycle times. Read cycles are always twice the write cycle times. This means you need to read the core memory specs carefully. Be sure that you see the both read and write cycle times. If you can only find one it will most likely be the write cycle time. --__--__-- Message: 4 From: "Witchy" <witchy(a)binarydinosaurs.co.uk> To: <cctech(a)classiccmp.org> Subject: RE: PET 2001 Oddity - 6550 unobtainium! Date: Mon, 20 Jan 2003 18:57:59 -0000 Reply-To: cctech(a)classiccmp.org > -----Original Message----- > From: cctech-admin(a)classiccmp.org [mailto:cctech-admin@classiccmp.org]On > Behalf Of Kevin Andres > Sent: 20 January 2003 15:10 > To: 'cctech(a)classiccmp.org' > Subject: RE: PET 2001 Oddity - 6550 unobtainium! > > > To all, (for fear of missing someone!) > I have a PET with the feared 6550 Unobtainiums. It doesn't > even get to a > prompt, but I suspect the screen full > of characters with some blinking and some that change upon an [ENTER] key > is telling me a video RAM went south. As When my 2001 did that I got some 2114s from bgmicro.com to swap out the video RAM and it works sweetly now. -- adrian/witchy www.binarydinosaurs.co.uk - the online computer museum www.snakebiteandblack.co.uk - monthly gothic shenanigans --__--__-- Message: 5 From: "Witchy" <witchy(a)binarydinosaurs.co.uk> To: <cctech(a)classiccmp.org>, <cctalk(a)classiccmp.org> Subject: RE: Dear Santa, I would like a VAX.... Date: Mon, 20 Jan 2003 18:59:13 -0000 Reply-To: cctech(a)classiccmp.org > -----Original Message----- > From: cctech-admin(a)classiccmp.org [mailto:cctech-admin@classiccmp.org]On > Behalf Of Jochen Kunz > Sent: 20 January 2003 10:15 > To: cctalk(a)classiccmp.org > Subject: Re: Dear Santa, I would like a VAX.... > > > On 2003.01.19 12:30 Witchy wrote: > > > The thing that's puzzling me is the fact they've shoehorned an RX33 > > in there - I thought the 3100-10 was the only machine to have floppy > > capability...... > I have a 2.88 MB SCSI floppy in my MV3100m95. Live and learn eh :) I didn't know that was possible. cheers -- adrian/witchy www.binarydinosaurs.co.uk - the online computer museum www.snakebiteandblack.co.uk - monthly gothic shenanigans --__--__-- Message: 6 Subject: RE: Dear Santa, I would like a VAX.... Date: Mon, 20 Jan 2003 20:05:21 +0100 From: "Fred N. van Kempen" <Fred.van.Kempen(a)microwalt.nl> To: <cctalk(a)classiccmp.org>, <vance(a)neurotica.com> Reply-To: cctech(a)classiccmp.org I have several 3100's with diskette drive (both MFM and SCSI). --f > -----Original Message----- > From: Witchy [mailto:witchy@binarydinosaurs.co.uk] > Sent: Monday, January 20, 2003 1:52 PM > To: vance(a)neurotica.com > Cc: cctalk(a)classiccmp.org > Subject: RE: Dear Santa, I would like a VAX.... > > > > -----Original Message----- > > From: vance(a)neurotica.com [mailto:vance@neurotica.com] > > Sent: 20 January 2003 06:20 > > To: Witchy > > Cc: cctalk(a)classiccmp.org > > Subject: RE: Dear Santa, I would like a VAX.... > > > > > I certainly never sold any and I don't remember it being an > > option for the > > > bigger machines. Pity it's front cover is missing too, but for > > 20-odd quid I > > > wouldn't complain :) > > > > That's not exactly right. I've seen everything between > TK50Z's and DLT > > TZ87's in MicroVAX III-series machines. > > Sorry, I meant 3100 series uVAXen :) > > -- > adrian/witchy > www.binarydinosaurs.co.uk - the online computer museum > www.snakebiteandblack.co.uk - monthly gothic shenanigans > > --__--__-- Message: 7 Date: Mon, 20 Jan 2003 11:56:11 -0800 (PST) From: "Peter C. Wallace" <pcw(a)mesanet.com> To: "'ClassicComputers'" <cctalk(a)classiccmp.org> Subject: Re: Wanted : Pinouts for 9311, 93L14, 8273 chips Reply-To: cctech(a)classiccmp.org On Sun, 19 Jan 2003, M H Stein wrote: > ----------------------Original Message------------------------ > One question. Assuming the signal names are conventional, that's the same > pinout as the '154 decoder. And yet my (ancient, hardbacked) TI TTL book > says that while the 74154 is a logical replacement, it's not a direct > replacement (this implies to me a different pinout). One of the pinouts I > received had the A inputs in the oposite order (20 = A0 .. 23 = A3). Can > somebody please check which is correct. > -tony > ------------------------------------------------------------------------ > Well, you'll probably get another dozen replies from the other helpful folks > here, but the pinouts and logic tables are identical and 23=a0, 20=a3. > I thought the same when I looked at the 9311, that it sure looked like a > 74154 which was used everywhere, and that there must be a pinout or > big characteristic difference to make it worth FSC's while (since they > also made the '154, and TI, NSC and Motorola, who also made the 9311). Didn't the 9311 pre-date the 74154? IICRC, a lot of the the 9300 series stuff got copied by TI (9300,9316 for example) when they got the synchronous is better message that Fairchild was promoting with the 9300 series... (wish I still had that Orange 9300 series designers guide) > > But the only difference I can see is that the max propagation delay is > less on the 9311; maybe someone else will see something else. > > mike > > Peter Wallace Mesa Electronics --__--__-- Message: 8 Date: Mon, 20 Jan 2003 12:27:38 -0700 From: Kevin Handy <kth(a)srv.net> To: cctalk(a)classiccmp.org Subject: Re: Dear Santa, I would like a VAX.... Reply-To: cctech(a)classiccmp.org Witchy wrote: >>-----Original Message----- >>From: cctech-admin(a)classiccmp.org [mailto:cctech-admin@classiccmp.org]On >>Behalf Of Antonio Carlini >>Sent: 19 January 2003 18:46 >>To: cctalk(a)classiccmp.org >>Subject: RE: Dear Santa, I would like a VAX.... >> >> >> >>>Frankly, the 8800 is too big, but that is too small... >>> >>> >>Then I guess you need to aim for one of the VAX 4000 >>series, but shipping on those will be pretty >>expensive. >> >> > >You're not kidding - not so long back a local college I do work for decided >to toss their 4000-500 plus RRD42 and TLZ06; fortunately I was there at the >time with a suitably sized estate car (station wagon for our US readers) so >2 of us managed to lift it into the back. When I got home I had to >completely strip it down in situ just to lift the bits out on my own and get >it in the house. In my reseller days the 4000 series were delivered on a >pallet with extra ramps to allow you to wheel the machine down to ground >level and now I know why :) > >Spent a happy couple of hours or so tonight getting my Alpha 3000-400 and >uVAX 3100-90 going again after a few months in storage, and I wish we could >afford the power to have 2 webservers going at the same time! Since we moved >into this house we've doubled our power requirements just for heating and >lighting; 3 machines going at the same time hasn't helped, so an extra VAX >sized load on things *definitely* won't help :) > If you have electrical heating (as opposed to gas/coal/oil/...), then running the VAX will not cost any more. Electricity generates the same amount of heat per kilowatt, no matter how is used. It will not cost any more than running the electrical heating units for the same amount of power. Only problem would be moving the heat to the proper location, and regulating it. ;-) >cheers > > > --__--__-- Message: 9 Date: Mon, 20 Jan 2003 11:13:49 -0800 (PST) From: Sellam Ismail <foo(a)siconic.com> To: "'ClassicComputers'" <cctalk(a)classiccmp.org> Subject: Re: Any Cromemco USERS? Reply-To: cctech(a)classiccmp.org On Mon, 20 Jan 2003, M H Stein wrote: > Just curious; is anybody actually using a Cromemco system > out there, running either CDOS, Cromix or Unix? Or does > anyone at least have one in running condition? I have a System/One in running condition (last I checked) running Cromix >from the harddrive. I have two actually. One was exhibited at the first VCF but because of all the moving the hard drive got crashed :( To my knowledge, the other one is still running, but I haven't fired it up in years. Sellam Ismail Vintage Computer Festival ------------------------------------------------------------------------ ------ International Man of Intrigue and Danger http://www.vintage.org * Old computing resources for business and academia at www.VintageTech.com * --__--__-- Message: 10 Date: Mon, 20 Jan 2003 11:21:55 -0800 (PST) From: Vintage Computer Festival <vcf(a)siconic.com> To: Classic Computers Mailing List <cctalk(a)classiccmp.org> Subject: Need manuals for Electrim EDC-1000 and Dycam Model 1 ($$$) Reply-To: cctech(a)classiccmp.org ----- Message Text ----- I have an outstanding bounty. I am seeking out manuals for the Electrim EDC-1000 and Dycam Model 1 computer imaging cameras circa late-80s/early-90s. If you have these manuals and want to earn a little extra cash, please contact me directly at <sellam(a)vintage.org>. -- Sellam Ismail Vintage Computer Festival ------------------------------------------------------------------------ ------ International Man of Intrigue and Danger http://www.vintage.org * Old computing resources for business and academia at www.VintageTech.com * --__--__-- Message: 11 From: "Bill Sudbrink" <wh.sudbrink(a)verizon.net> To: <cctalk(a)classiccmp.org> Subject: RE: Any Cromemco USERS? Date: Mon, 20 Jan 2003 14:31:19 -0500 Reply-To: cctech(a)classiccmp.org > Just curious; is anybody actually using a Cromemco system > out there, running either CDOS, Cromix or Unix? Or does > anyone at least have one in running condition? I have an IMSAI chasis stuffed with cromemco boards. I run CP/M on it... but I don't think there would be a reason it wouldn't run a cromemco OS. It has a CPUZ, a 16FDC, a 64KZ and a TU-ART in it. --__--__-- Message: 12 From: "Ed Tillman" <ETILLMAN(a)satx.rr.com> To: <cctalk(a)classiccmp.org> Subject: DOS1.0, 3.20, and the like... Date: Mon, 20 Jan 2003 13:58:40 -0600 Reply-To: cctech(a)classiccmp.org Hello... Still looking. Someone sent me a reply in the list with a complete set of IBM PC-DOS 1.0 still in the package. I replied, but never saw either my reply or any answer come back. I'm still interested in buying, if I/we can make arrangements... Cheers! Ed --__--__-- Message: 13 From: Jos Dreesen / Marian Capel <jos.mar(a)bluewin.ch> Organization: None To: cctalk(a)classiccmp.org Subject: Re: Core memory speeds Date: Mon, 20 Jan 2003 21:09:41 +0100 Reply-To: cctech(a)classiccmp.org On Monday 20 January 2003 12:02 am, ben franchuk wrote: > Since I am building a classic TTL style computer, what was the access > and cycle time of core memory before it vanished and just when did it do > that? Also when did 74LS come out? I am aiming for late 70's early 80's > time frame here since this looks to be the transition stage from the the > old to the new. Ben My 1975 core memory products catalogue ( Philips components ) lists modules with cycle times ranging from 0.65 to 1.5 us ,both for 8kx18 stacks. My newest core memory stack sits in my Philips P856 : dated 1980, cycle time unknown. My own TTL computer, dated 1986, just uses 8kx8 SRAMs...... Jos Dreesen --__--__-- Message: 14 Date: Mon, 20 Jan 2003 12:10:11 -0800 (PST) From: Ethan Dicks <erd_6502(a)yahoo.com> Subject: RE: PET 2001 Oddity - 6550 unobtainium! To: cctalk(a)classiccmp.org Reply-To: cctech(a)classiccmp.org --- Kevin Andres <kandres(a)epssecurity.com> wrote: > To all, (for fear of missing someone!) > I have a PET with the feared 6550 Unobtainiums. To my experience, those are the more common "static" PETs, but from reading the list, perhaps there were more made with 2114s. > It doesn't even get to a prompt, but I suspect the screen full > of characters with some blinking and some that change upon an > [ENTER] key is telling me a video RAM went south. Perhaps. Could also be zero page. > ...I have toyed with swapping a CD6264 and or multiples into the mother > board even going so far as to quick doing an internet circuit board to > accomodate them. Time is the major constraint here. I also remember an > article or text which referenced adding perhaps a dynamic memory pack > from another machine to the expander plug, with an appropriate R & C > stobe assembly supplying what the PET didn't have. Whoa, memories!!!! Not sure what you are referring to, but I know of a modern board that plugs into the CPU socket that provides 100% of the ROM and program RAM, but I am fairly certain that it does _not_ provide for RAM at $8000. Now... given how the circuit works, it might not be too hard to remove the two video SRAMs (which should be side-by-side, not next to the program RAM at the front edge of the board), replace them with machined pin sockets (or four strips cut from .6" wide sockets if you can't locate "real" 6550 sockets), then you could either swap them out with ones from the front row to verify that it _is_ a video SRAM, or just get some perfboard from Radio Shack (or wherever you get parts these days) and hand-wire a daughter card with just about any 8-bit-wide SRAM from a 2016 or 6116 on up to a 6264 or 62256 or whatever. You could theoretically wire up a socket adapter to use a 2114 in place of a 6550, but given the reliability of the 2114s, I'd seriously consider a more modern alternative. I'm fairly certain the select lines for $8000 are not available on the edge connector, so no matter how you do it, you'll have to tap some lines from the motherboard. You _could_ build an edge-card board with the SRAM on it, remove the internal ones, and run the select lines as jumpers to your card, if you are more comfortable building something for the edge card. Don't know what to recommend for the "least time" solution, though. Check the front row SRAMs first, to see if you have a zero page problem. It's also possible that one of the TTL chips in the address selector logic is faulty and you aren't writing to the video page at all. If one SRAM were out, the machine would function, but look very odd. Sounds like either both SRAMs are faulty or you have a problem elsewhere either in the video chain or for the CPU itself. I have this Fluke 9010A tester that would help establish which one... it plugs into the CPU socket (I have a 6502 pod and a 68000 pod) and either runs as if it were just the CPU in there, or you can break it out of "emulation" mode and generate bus cycles... you can watch it test video memory and use it to strobe lines to see if it's a selector or mux/demux chip. A logic analyzer can also be helpful. I presume you have basic tools but may not have more advanced tools, yes? -ethan > I have looked at the serial number several times and always neglect to > write it down. I early on, 1975 or there > abouts, added a reset button to the front panel because of my tendency to > > lock the silly thing up with my incessant > poking around. I know I also have several of the early tomes on the PET > in > the basement, along with a couple of > Kilobaud articles reference the machine. > > Kev > kandres(a)epssecurity.com > > > -----Original Message----- > From: cctech-request(a)classiccmp.org [SMTP:cctech-request@classiccmp.org] > Sent: Sunday, January 19, 2003 2:56 AM > To: cctech(a)classiccmp.org > Subject: cctech digest, Vol 1 #320 - 48 msgs > > Send cctech mailing list submissions to > cctech(a)classiccmp.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://www.classiccmp.org/mailman/listinfo/cctech > or, via email, send a message with subject or body 'help' to > cctech-request(a)classiccmp.org > > You can reach the person managing the list at > cctech-admin(a)classiccmp.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of cctech digest..." > > > Today's Topics: > > 1. Got the second batch of -11 equipment (Bill Bradford) > 2. Re: Got the second batch of -11 equipment (Dave McGuire) > 3. Re: Update: BBC Acorn (=?iso-8859-1?q?Jules=20Richardson?=) > 4. Re: PET 2001 oddity (pete(a)dunnington.u-net.com) > 5. RE: MV3100 M90 / VAX 4100 (was: VXT X terminal question) (Antonio > Carlini) > 6. PET 2001 oddity - solved! (Adrian Vickers) > 7. RE: Musings on BabyVAX video (Antonio Carlini) > 8. RE: Hobbled NVAX (was: VXT X terminal question) (Antonio Carlini) > 9. Re: PET 2001 oddity (Adrian Vickers) > 10. Re: PET 2001 oddity (Adrian Vickers) > 11. Apple Macintosh- where would this be useful? (Kenneth Donchatz) > 12. Re: Apple Macintosh- where would this be useful? (Cameron Kaiser) > 13. Re: PET 2001 oddity - solved! (pete(a)dunnington.u-net.com) > 14. Re: PET 2001 oddity (pete(a)dunnington.u-net.com) > 15. Re: PET 2001 oddity (pete(a)dunnington.u-net.com) > 16. RE: Musings on BabyVAX video (Fred deBros) > 17. Re: Update: BBC Acorn (pete(a)dunnington.u-net.com) > 18. RE: Musings on BabyVAX video (Doc Shipley) > 19. Re: VXT X terminal question (Jochen Kunz) > 20. Re: VXT X terminal question (Jochen Kunz) > 21. BBC Micro - assemblers - info needed (Philip Pemberton) > 22. RE: Musings on BabyVAX video (Peter C. Wallace) > 23. Re: IBM 5322 (Sellam Ismail) > 24. SGI Discussions? was Re: Mac SE/30 accessories availability? (David > > Holland) > 25. PET 2001 oddity (M H Stein) > 26. T&B Ansley IDC connectors (M H Stein) > 27. PerSci Model 277 Dual 8" Floppy Drives - Info Needed (M H Stein) > 28. Re: About Electronics Questions (Tony Duell) > 29. RE: Dear Santa, I would like a VAX.... (Zane H. Healy) > 30. Re: Dear Santa, I would like a Yamaha CX5M ... (Sellam Ismail) > 31. Re: Apple 1 schematics (Tothwolf) > 32. Re: Wanted : Pinouts for 9311, 93L14, 8273 chips (David Gesswein) > 33. Re: DOS 1.0 (Tothwolf) > 34. RE: Hobbled NVAX (Michael Sokolov) > 35. New classic (Gareth Knight) > 36. RE: VXT X terminal question (Michael Sokolov) > 37. MCA Fast Ethernet Cards (vance(a)neurotica.com) > 38. Re: SGI Discussions? (Brian Chase) > 39. RE: VXT X terminal question (Antonio Carlini) > 40. RE: Musings on BabyVAX video (r. 'bear' stricklin) > 41. Re: SGI Discussions? was Re: Mac SE/30 accessories availability? > (r. > 'bear' stricklin) > 42. RE: VXT X terminal question (Fred N. van Kempen) > 43. Apple 1 schematics (chris) > 44. RE: VXT X terminal question (Fred N. van Kempen) > 45. RE: VXT X terminal question (Michael Sokolov) > 46. Re: Apple 1 schematics (Eric Smith) > 47. Re: Got the second batch of -11 equipment (John Honniball) > 48. Re: Apple 1 schematics (John Honniball) > > -- __--__-- > > Message: 1 > Date: Sat, 18 Jan 2003 15:11:17 -0600 > From: Bill Bradford <mrbill(a)mrbill.net> > To: cctech(a)classiccmp.org > Subject: Got the second batch of -11 equipment > Reply-To: cctech(a)classiccmp.org > > Unfortunately, the actual "machine" (the guy didnt know that the MINC-11 > was > a system as well) is just an 11/23 with some RL01s. > > Pictures: > > http://www.pdp11.org/minc/01-18-03/ > > I have no idea if the RL01 disk packs are any good, but I've got one > DEC-labled RT-11 v4.0, and one hand-labeled RT-11 v4.0C "patched to > level F". The top RL01 is missing the hinged cover. > > Anybody want two RL02s (by the way, how the hell do I get the top covers > open? The "switch" on the top wont budge), and two RL01s? Pickup in > Austin, Texas.. > > Not a bad haul for a total of $30, even if I do just keep the 11/23 and > the MINC-11 and the racks. > > Bill > > -- > bill bradford > mrbill(a)mrbill.net > austin, texas > > -- __--__-- > > Message: 2 > Date: Sat, 18 Jan 2003 16:58:47 -0500 > Subject: Re: Got the second batch of -11 equipment > From: Dave McGuire <mcguire(a)neurotica.com> > To: mrbill(a)mrbill.net, cctech(a)classiccmp.org > Reply-To: cctech(a)classiccmp.org > > On Saturday, January 18, 2003, at 04:11 PM, Bill Bradford wrote: > > Anybody want two RL02s (by the way, how the hell do I get the top > > covers > > open? The "switch" on the top wont budge), and two RL01s? Pickup in > > Austin, Texas.. > > The top door latch on an RL drive is locked by a solenoid. Apply > power to the drive, make sure the "load" button is out, wait for a > "click" (the load light will come on) then you should be able to > squeeze that little slide handle and open the top cover. > > I would really like to have the RL02s but I have no idea how I'd get > them from you. :-( > > -Dave > > -- > Dave McGuire "She's a cheek pincher. I have scars." > St. Petersburg, FL -Gary Nichols > > > -- __--__-- > > Message: 3 > Date: Sat, 18 Jan 2003 10:23:31 +0000 (GMT) > From: =?iso-8859-1?q?Jules=20Richardson?= <julesrichardsonuk(a)yahoo.co.uk> > Subject: Re: Update: BBC Acorn > To: cctalk(a)classiccmp.org > Reply-To: cctech(a)classiccmp.org > > > >> just checked mine again and it's 25-ANC13-1000049 > >> > >Mine is 25-ANC13-1000034, and Rob O'Donnell said his is > 25-ANC13-1000038. > > well if Rob's was the last then they obviously didn't do a very good job > of > numbering things :-) Unless Rob's was the last one released by Acorn, > but > they > all sat in storage for a while... > > > Do either of you think you have a Disc 1 for it? > > no discs at all I'm afraid :-( hence why I was asking about whther > there's > a > sensible ftp site to put them on so if a working set can be collected at > least > they can be archived somewhere (the same goes for manuals really, but > scanning > those would be a major pain I expect!) > > that used to be the problem - the hardware used to get thrown out but > discs > would lie around on shelves until someone did a bit of spring cleaning > now > and > then; they would have been trashed seperately and maybe straight into a > bin > in > the office :-( > > cheers > > Jules > (who has too many systems that don't work for lack of necessary discs :-) > > __________________________________________________ > Do You Yahoo!? > Everything you'll ever need on one web page > from News and Sport to Email and Music Charts > http://uk.my.yahoo.com > > -- __--__-- > > Message: 4 > Date: Sat, 18 Jan 2003 11:37:37 GMT > From: pete(a)dunnington.u-net.com > To: cctalk(a)classiccmp.org > Subject: Re: PET 2001 oddity > Reply-To: cctech(a)classiccmp.org > > On Jan 17, 18:18, Adrian Vickers wrote: > > > > Unfortunately, the PET seems to have developed an odd fault: It won't > take > > a BASIC program, and some keywords seem to be knackered... > > > So.... I figure the BASIC ROM has become slightly corrupted, OR I've > got > a > > flakey memory chip which reads OK but doesn't write properly. The > question > > is, how to find out? > > Swap some of the RAM chips around and see if it makes a difference. If > it > does, particularly if it fixes it, swap them back -- it might just be a > bad > socket contact. Be careful with the RAM chips: if you have the type of > PET > I think you do, they're MOS Technology 6550, aka unobtainium, and unlike > any other RAM chip. > > > 1) Can the BASIC ROM be swapped with one from, say, a 3032 or 4016? In > > fact, which one IS the BASIC ROM? > > No. BASIC (and also the rest of the code, whether you call it a kernel > or > a monitor, or "stuff") is spread over several chips. And in the early > PETs, the ROMs too are MOS Technology specials, and the different > versions > of PETs had different ROMs. In fact, there was an upgrade for the > originals, because they didn't handle the IEEE routines properly, which > made it impossible to use disks properly (amongst other things). > > > 2) If it's a dodgy memory chip, what's the best way of isolating it? I > have > > an oscilloscope, but nada skill in this sort of thing. > > 3) If, as my money is on, it's the BASIC ROM, can it be replaced with > an > > EPROM - if so, there's a whole gamut of additional questions to > follow.... > > If it's a later unit with 24-pin 2332 mask ROMs, then a TMS2532 EPROM can > be used (not a 2732, nor other 2532s that don't have the TMS prefix). If > it's got 28-pin MOS Technology MPS6540 ROMs, you'd need a carrier to > shuffle some signals, at the very least, and possibly some logic to > handle > the multiple select lines. The good news, though, is that I have a > chicklet-keyboard 2001-N as well, and if necessary, I could probably do a > ROM dump for you (though IIRC it used to be on the 'net somewhere). I > wouldn't need to move more than a few hundreweight of stuff to get at it > ;-) > > -- > Pete Peter Turnbull > Network Manager > University of York > > -- __--__-- > > Message: 5 > From: "Antonio Carlini" <arcarlini(a)iee.org> > To: <cctalk(a)classiccmp.org> > Subject: RE: MV3100 M90 / VAX 4100 (was: VXT X terminal question) > Date: Sat, 18 Jan 2003 11:48:41 -0000 > Organization: me@home > Reply-To: cctech(a)classiccmp.org > > > Wow! I thought the CQBIC was not populated on the KA50. > > I'm fairly sure the mainboards are identical (i.e. the same part > number). > I've never been inside a VAX 4000-100 so I've never had the > chance to personally check this, but the last time I saw a > parts list, the part numbers were the same. > > > Hmm. I do not suppose that this identity flag can be > > permanently stored anywhere other than in the firmware flash > > ROM. I'm sure DEC wouldn't want people to suddenly discover > > that their machine shape-shifts when the NVRAM battery is > > disconnected. So does this console test actually erase and > > reprogram a sector in the firmware flash ROM, or is the > > change only in effect until the next power cycle? > > It's stored in the flash EPROM - it rewrites it as > part of the test (and warns you not to switch off > while it is doing so). The change is permanent (until > you run the test again and switch back). > > I doubt HP care whether customers know this or not now. I > doubt they cared even back then: switching from a UV3100-90 > to a VAX 4000-100 didn't get you anything extra (unless > you paid for a new case) and it did cost you more > in licence fees. Switching the other way disabled Qbus > and DSSI, so although your licence cost you less, you > got less for it. And if you wanted the cheaper licence > you would have bought the cheaper machine anyway! > > Antonio > > -- > > --------------- > Antonio Carlini arcarlini(a)iee.org > > > > -- __--__-- > > Message: 6 > Date: Sat, 18 Jan 2003 13:28:22 +0000 > To: cctalk(a)classiccmp.org > From: Adrian Vickers <avickers(a)solutionengineers.com> > Subject: PET 2001 oddity - solved! > Reply-To: cctech(a)classiccmp.org > > --=======74632786======= > Content-Type: text/plain; x-avg-checked=avg-ok-671DF1C; charset=us-ascii; > > format=flowed > Content-Transfer-Encoding: 8bit > > Woohoo! > > Turned out to be dead simple; yet another blown 2114. > > I figured the chip @ $0400 (i.e. the start of BASIC) was faulty, seeing > as > how the machine wouldn't take a single line of BASIC. So, I swapped the > appropriate bank out to another bank - and presto! BASIC worked again. > > Having done this, I then swapped *one* of the two chips (according to the > schematic, there are two chips for each $0400 block of memory - why is > this?) back to its original spot, and presto again - no BASIC. Swapped > that > chip for the one remaining spare, and presto^3! BASIC again. > > So, now I need more 2114's as an insurance policy... > > Meanwhile, I thank the list *again* for their invaluable help (Ethan, > Mike > & Pete in particular in this case). What would I do without you (except > preside over a collection of steadily failing machines)? > > -- > Cheers, Ade. > Be where it's at, B-Racing! > http://b-racing.com > > --=======74632786=======-- > > > -- __--__-- > > Message: 7 > From: "Antonio Carlini" <arcarlini(a)iee.org> > To: <cctalk(a)classiccmp.org> > Subject: RE: Musings on BabyVAX video > Date: Sat, 18 Jan 2003 12:06:37 -0000 > Organization: me@home > Reply-To: cctech(a)classiccmp.org > > > I thought so too. But what about SPX? Can it go into a > > pre-M76 VS3100? And what about VS2K SPX? (It would of course > > be very silly in practice, but I'm talking in principle.) > > SPX will go into KA42s - although I don't know for sure whether > it was ever sold and supported. It will probably plug into a > VS2K but I have no idea whether it will work (or whether anything > would run on it without more code being written). > > > So I thought that KA42 had one big CDAL-to-EDAL bridge > > upfront and the rest of the system except memory was EDAL. > > But I could be wrong, maybe different subsystems have their > > own independent connections to CDAL. > > You are probably right - I just threw in "as necessary" because > I don't have a KA42 block diagram handy (in fact, I may not have > one at all - there is not much info floating around on these > and the early UVAX 3100 systems). > > > But if KA42 indeed has one big CDAL-to-EDAL bridge upfront, > > the million dollar question becomes: why did the VS4000 M90 > > dev team toil to design their own CDAL-to-EDAL bridge (CEAC) > > if there already was one? The only plausible explanation I > > could come up with is that perhaps on KA42 the CDAL-to-EDAL > > bridge was inseparably integrated with the memory controller. > > I don't know why they rolled their own. Given that they used > or modified existing designs where possible, I assume that there > were good reasons. Perhaps the existing design was too slow or > took up too much room (this latter consideration was definitely > very important for the -90). > > > BTW, I have never found any references to a technical manual > > for VS3100 (any > > model) or for the corresponding early MV3100 models. It looks > > like one never existed. Do you have any more info? > > No - and I could never find any even while I was inside > DEC. There must have been *some* such documentation > but it was nowhere I could find. > > > Does KA43 have memory on CDAL or on RDAL? I once had one in > > my hands and when I looked on the board to see what chips it > > There's not a lot of technical info on the KA43 either! > > > Yeah, maybe that was the change. (Was that a typo or was > > EDAQL a chip converting EDAL to SPX's internal bus?) > > Typo. > > > > >http://www.research.compaq.com/wrl/DECarchives/DTJ/DTJ402/DTJ402SC.TXT > > > >But it talks about the X aspects of it and says nothing about VXT2000 > hardware. > > Yes, I've read that one and it's not the one. I was sure that there was > an article describing the VXT2000 itself, but I guess since I cannot > find it either on the web or in my docs, I must have > imagined it. Oh well. > > Antonio > > -- > > --------------- > Antonio Carlini arcarlini(a)iee.org > > > > -- __--__-- > > Message: 8 > From: "Antonio Carlini" <arcarlini(a)iee.org> > To: <cctalk(a)classiccmp.org> > Subject: RE: Hobbled NVAX (was: VXT X terminal question) > Date: Sat, 18 Jan 2003 12:11:19 -0000 > Organization: me@home > Reply-To: cctech(a)classiccmp.org > > > I assume the NVAX microcode was patched via its PCS facility > > by the boot firmware, not by making a different NVAX die with > > different microcode I hope, right? If so the abomination is > > I assume so too. > > > to be reversed by reflashing the boot ROM with non-hobbled > > firmware (stolen from a friend with a non-hobbled machine). > > They had flash ROMs like all other NVAXen, right? > > I doubt that non-hobbled firmware exists. I doubt you > could just use the UV3100-96 firmware upgrade on a > UV3100-85 and have it work. In fact, I guess the firmware > is the same but it looks at the machine's hardware (e.g. > size and config of backup cache or something like that) > to determine what it is running on, and disables the VIC > if it thinks the machine is a UV3100-85. > > The easiest thing to do would be to try reenabling the VIC. > If that is not enough, you would have to find the bit of code > that disables the VIC and NOP it out. I doubt that the code > was protected too much: it would have been way beyond most > customers' ability to alter it. > > Antonio > > -- > > --------------- > Antonio Carlini arcarlini(a)iee.org > > > > -- __--__-- > > Message: 9 > Date: Sat, 18 Jan 2003 12:49:24 +0000 > To: cctalk(a)classiccmp.org > From: Adrian Vickers <avickers(a)solutionengineers.com> > Subject: Re: PET 2001 oddity > Reply-To: cctech(a)classiccmp.org > > --=======54493991======= > Content-Type: text/plain; x-avg-checked=avg-ok-671DF1C; charset=us-ascii; > > format=flowed > Content-Transfer-Encoding: 8bit > > At 06:41 18/01/2003, Ethan Dicks wrote: > > >--- Adrian Vickers <avickers(a)solutionengineers.com> wrote: > > > I dug the 2001 out of the cupboard the other day... > > > >Can you give more information about *which* 2001 you have? There > >are at least two major motherboard revisions for the static-RAM PETs. > >They use different ROMs and RAMs. > > OK, I can but try.... > > According to the sticker on the back, this is a 2001-8BS. The motherboard > layout appears to be the same as the one pictured on www.zimmers.net on > the > 4k/8k layout. I've taken some photos of my motherboard, which can now be > found here: > > http://helmies.org.uk/images/cbm2001/mobo_front.jpg > http://helmies.org.uk/images/cbm2001/mobo_back.jpg > http://helmies.org.uk/images/cbm2001/mobo_side.jpg > > NOTE: Each picture is approx 449K = long download over a modem! > > >Also, as I have one, there are also models of 2001 that have _dynamic_ > >RAMs. My 2001-N has 32K worth of 4116 chips (from the factory) and a > >full-sized graphic keyboard. If it were for sale in Europe, it would > >most likely been labelled a 3032, for comparison, but here in the > States, > >it says "2001" on the front. > > > >I bring it up because I _think_ you are talking about the original > >chicklet-keyboard SRAM PET, but you didn't come right out and say so. > > Apologies, I didn't; I keep forgetting that the 2001 went through more > development than perhaps any of the other PETs. Yes, it is a chicklet > keyboard version, with static RAM (2114's) and original 28-pin MOS ROMs. > > > > > > Unfortunately, the PET seems to have developed an odd fault: It won't > > > take a BASIC program, and some keywords seem to be knackered... > >. > >. > >. > > > So.... I figure the BASIC ROM has become slightly corrupted, OR I've > got > > > a flakey memory chip... > > > > > > 1) Can the BASIC ROM be swapped with one from, say, a 3032 or 4016? > > > >Most likely not. If your 2001 has 2114 SRAMs, perhaps. There are > >upgrade ROMs (BASIC 2.0, anyway) _for_ the 2001 > > Personally, I'd rather keep this one as original as possible, i.e. keep > the > original (buggy) ROMs. However, if it means keeping it working, then I'm > prepared to substitute the MOS ROMs with a board/set of boards containing > more modern EPROMs wired appropriately containing the original images. > Not > that I've got a clue how to go about doing that, mind... > > > > > In fact, which one IS the BASIC ROM? > > > >BASIC lives in several ROMs, the Kernel lives in several ROMs. BASICs > >prior to 4.0 occupied $C000-$DFFF, and the Kernel occupied $E000-$FFFF, > >minus the PIAs and VIAs, etc., at $E800. BASIC 4.0 starts at $B000 > >to add room for diskette commands. > > > >In my PET, $9000, $A000 and $B000 are filled with user-supplied firmware > >(better machine-language monitor, BASIC extensions and a tape speeder). > >These sorts of things, plus ROMs for word processors and other > applications > >were somewhat typical amongst serious PET users. Dunno if yours has > >anything like that, but if you find ROMs where you expect none to be, > >that's probably why. > > Well, there are no unpolulated sockets, so perhaps it's a fair bet that > there's some extra stuff in there. Goodness knows what, though, all the > ROMs are MOS 6540's. > > > > 2) If it's a dodgy memory chip, what's the best way of isolating it? > I > > > have an oscilloscope, but nada skill in this sort of thing. > > > >The typical way of testing RAMs in a C= service center was to rotate > >a pair of them from bank to bank and see if the symptoms shift. It > >was especially handy for detecting zero page problems. > > Figures :( I've had to do this once already to locate a broken 2114 > (when > I got the machine, it claimed only 1600 bytes of memory were free). > Luckily, I have one more spare 2114 (I got two from someone on this list, > I > forget who [for which I apologise] and thank them (again) profusely, as > if > it is a broken 2114, there's a chance the second spare might be > essential). > > Anyway, if it *is* a failing RAM chip, my guess is it's the one which > sits > near the bottom of BASIC memory, since the first line number causes a > crash. Does anyone have a map showing the correlation between memory > addresses & specific chips? > > If it's on the schematics, I'll be looking there next (so no need to > answer > that question). > > > <snip the rest for brevity> > > Ta for that, all good info! > > Thus, the order of the day is: > > 1) Try to determine which 2114 chip might have gone bad, either by > sequenced swapping or by trying to be clever with the schematics. > > 2) If that doesn't fix it, re-seat all ROMs. > > 3) If that doesn't fix it, go to plan C - which doesn't exist yet... > > Also, I know this has been asked & answered before, but what's the best > way > of cleaning the board? It has more dust on it than I am properly > comfortable with, and besides it looks horrible. > > I'm guessing that *ideally* it should be washed in distilled water with a > very soft brush, then left in a warm place to dry thoroughly. OTOH, maybe > alcohol would be a better idea? I have some disc head cleaning alcohol > which would suffice - recommendations please! > > > >Good luck, > > Thanks - I'm going to need that (in place of specific skills :) > > > >P.S. - if you don't know about http://www.funet.fi/pub/cbm/ it's a > >great site with schematics and firmware. > > I already knew of it, but had forgotten how useful it might be. Will > check > that out next. Ta! > > > -- > Cheers, Ade. > Be where it's at, B-Racing! > http://b-racing.com > > --=======54493991=======-- > > > -- __--__-- > > Message: 10 > Date: Sat, 18 Jan 2003 12:55:43 +0000 > To: cctalk(a)classiccmp.org > From: Adrian Vickers <avickers(a)solutionengineers.com> > Subject: Re: PET 2001 oddity > Reply-To: cctech(a)classiccmp.org > > --=======37E27F29======= > Content-Type: text/plain; x-avg-checked=avg-ok-671DF1C; charset=us-ascii; > > format=flowed > Content-Transfer-Encoding: 8bit > > At 11:37 18/01/2003, you wrote: > > >On Jan 17, 18:18, Adrian Vickers wrote: > > > > > > Unfortunately, the PET seems to have developed an odd fault: It won't > >take > > > a BASIC program, and some keywords seem to be knackered... > > > > > So.... I figure the BASIC ROM has become slightly corrupted, OR I've > got > >a > > > flakey memory chip which reads OK but doesn't write properly. The > >question > > > is, how to find out? > > > >Swap some of the RAM chips around and see if it makes a difference. If > it > >does, particularly if it fixes it, swap them back -- it might just be a > bad > >socket contact. Be careful with the RAM chips: if you have the type of > PET > >I think you do, they're MOS Technology 6550, aka unobtainium, and unlike > >any other RAM chip. > > Hi Pete, > > It's not *quite* as bad as all that, it uses 2114's. Although they're not > made of unobtainum, they ARE made of "rareium" (or R@RE!ium on eBay - > probably the *WOW* *L@@K* isotope, knowing my luck :). > > > > 1) Can the BASIC ROM be swapped with one from, say, a 3032 or 4016? > In > > > fact, which one IS the BASIC ROM? > > > >No. BASIC (and also the rest of the code, whether you call it a kernel > or > >a monitor, or "stuff") is spread over several chips. > > Damn, I just *knew* it wouldn't be that easy. > > > And in the early > >PETs, the ROMs too are MOS Technology specials, and the different > versions > >of PETs had different ROMs. > > AFAICT, these are version 1 ROMs. Every socket is filled, and they're all > MOS6540s. > > >If it's got 28-pin MOS Technology MPS6540 ROMs, you'd need a carrier to > >shuffle some signals, at the very least, and possibly some logic to > handle > >the multiple select lines. > > Harrumph. Guess which one it has... > > Still, I've no fear of making carriers, etc. - albeit time constraints & > lack of equipment will make it tough right now - at least until I can get > my MicroMAT going. > > >The good news, though, is that I have a > >chicklet-keyboard 2001-N as well, and if necessary, I could probably do > a > >ROM dump for you (though IIRC it used to be on the 'net somewhere). I > >wouldn't need to move more than a few hundreweight of stuff to get at it > >;-) > > That might be cool (and *snap* about the tons of stuff, although having > seen your little collection I think you do have rather more to shift > about > than me!). However, let me try out the RAM swapping & chip re-seating > first, and if that doesn't fix it, then we'll look into EPROMs & > suchlike. > > -- > Cheers, Ade. > Be where it's at, B-Racing! > http://b-racing.com > > --=======37E27F29=======-- > > > -- __--__-- > > Message: 11 > Date: Sat, 18 Jan 2003 05:40:46 -0800 (PST) > From: Kenneth Donchatz <kendonchatz(a)yahoo.com> > Subject: Apple Macintosh- where would this be useful? > To: cctalk(a)classiccmp.org > Reply-To: cctech(a)classiccmp.org > > --0-1341891654-1042897246=:19979 > Content-Type: text/plain; charset=us-ascii > > > I have a 13 year old apple macintosh that works like a dream. It's > loaded > with programs, and this great little machine got me through law school > and > helped me launch my career. When my employer switched over to a compaq > system, I could no longer use this machine to work on projects at home > and > was forced to pick up an etower package instead. For the last 5 years, > it's sat in my basement waiting. Everything works perfectly, including > the > printer, and all of the parts are original. Any tips on where I might > take > this machine so that it can be used? It's a shame to let it sit here and > rot. > > Ken Donchatz > > kendonchatz(a)yahoo.com > > Columbus, Ohio > > > > --------------------------------- > Do you Yahoo!? > Yahoo! Mail Plus - Powerful. Affordable. Sign up now > --0-1341891654-1042897246=:19979 > Content-Type: text/html; charset=us-ascii > > I have a 13 year old apple macintosh that works like a dream.  > It's > loaded with programs, and this great little machine got me through law > school and helped me launch my career.  When my employer switched > over > to a compaq system, I could no longer use this machine to work on > projects > at home and was forced to pick up an etower package instead.  For > the > last 5 years, it's sat in my basement waiting.  Everything works > perfectly, including the printer, and all of the parts are > original.  > Any tips on where I might take this machine so that it can be used? It's > a > shame to let it sit here and rot. > Ken Donchatz > <A href="mailto:kendonchatz@yahoo.com">kendonchatz(a)yahoo.com</A> > Columbus, Ohio <hr size=1>Do you Yahoo!? > <a > href="http://rd.yahoo.com/mail/mailsig/*http://mailplus.yahoo.com">Yahoo! > > Mail Plus</a> - Powerful. Affordable. <a > href="http://rd.yahoo.com/mail/mailsig/*http://mailplus.yahoo.com">Sign > up > now</a> > --0-1341891654-1042897246=:19979-- > > -- __--__-- > > Message: 12 > From: Cameron Kaiser <spectre(a)stockholm.ptloma.edu> > Subject: Re: Apple Macintosh- where would this be useful? > To: cctalk(a)classiccmp.org > Date: Sat, 18 Jan 2003 06:09:47 -0800 (PST) > Reply-To: cctech(a)classiccmp.org > > > I have a 13 year old apple macintosh that works like a dream. > > Which model? > > -- > ----------------------------- personal page: > http://www.armory.com/~spectre/ -- > Cameron Kaiser, Point Loma Nazarene University * > ckaiser(a)stockholm.ptloma.edu > -- Of course I run NetBSD. --------------------------------------------- > > ------- > > -- __--__-- > > Message: 13 > Date: Sat, 18 Jan 2003 15:34:45 GMT > From: pete(a)dunnington.u-net.com > To: cctalk(a)classiccmp.org > Subject: Re: PET 2001 oddity - solved! > Reply-To: cctech(a)classiccmp.org > > On Jan 18, 13:28, Adrian Vickers wrote: > > > Turned out to be dead simple; yet another blown 2114. > > > > I figured the chip @ $0400 (i.e. the start of BASIC) was faulty, seeing > as > > how the machine wouldn't take a single line of BASIC. So, I swapped the > > appropriate bank out to another bank - and presto! BASIC worked again. > > Good! > > > Having done this, I then swapped *one* of the two chips (according to > the > > schematic, there are two chips for each $0400 block of memory - why is > > this?) > > A 2114 is 1K x 4 bits wide, so they're used in pairs to make bytes. > > -- > Pete Peter Turnbull > Network Manager > University of York > > -- __--__-- > > Message: 14 > Date: Sat, 18 Jan 2003 15:11:59 GMT > From: pete(a)dunnington.u-net.com > To: cctalk(a)classiccmp.org > Subject: Re: PET 2001 oddity > Reply-To: cctech(a)classiccmp.org > > Hi, Ade. > > On Jan 18, 12:55, Adrian Vickers wrote: > > > It's not *quite* as bad as all that, it uses 2114's. Although they're > not > > made of unobtainum, they ARE made of "rareium" (or R@RE!ium on eBay - > > probably the *WOW* *L@@K* isotope, knowing my luck :). > > Good! If it *is* a RAM fault, and you can't find one at a reasonable > price, let me know. I think I still have a small number spare. > > > AFAICT, these are version 1 ROMs. Every socket is filled, and they're > all > > MOS6540s. > > Drat. Let's hope it's not a ROM fault. Sadly, my copy of "The PET > Revealed" with its mostly-legible (!) circuit diagrams, shows the later > board with 2332s. But I do have a copy of the MPS6540 pinout somewhere. > > > Harrumph. Guess which one it has... > > > > Still, I've no fear of making carriers, etc. - albeit time constraints > & > > lack of equipment will make it tough right now - at least until I can > get > > my MicroMAT going. > > > > >The good news, though, is that I have a > > >chicklet-keyboard 2001-N as well, and if necessary, I could probably > do > a > > >ROM dump for you (though IIRC it used to be on the 'net somewhere). I > > >wouldn't need to move more than a few hundreweight of stuff to get at > it > > >;-) > > > > That might be cool (and *snap* about the tons of stuff, although having > > seen your little collection I think you do have rather more to shift > about > > than me!). However, let me try out the RAM swapping & chip re-seating > > first, and if that doesn't fix it, then we'll look into EPROMs & > suchlike. > > OK. Give me shout if you want me to start burrowing. Or come and pay a > visit... > > -- > Pete Peter Turnbull > Network Manager > University of York > > -- __--__-- > > Message: 15 > Date: Sat, 18 Jan 2003 15:29:23 GMT > From: pete(a)dunnington.u-net.com > To: cctalk(a)classiccmp.org > Subject: Re: PET 2001 oddity > Reply-To: cctech(a)classiccmp.org > > On Jan 18, 12:49, Adrian Vickers wrote: > > At 06:41 18/01/2003, Ethan Dicks wrote: > > > > >I bring it up because I _think_ you are talking about the original > > >chicklet-keyboard SRAM PET, but you didn't come right out and say so. > > > > Apologies, I didn't; I keep forgetting that the 2001 went through more > > development than perhaps any of the other PETs. Yes, it is a chicklet > > keyboard version, with static RAM (2114's) and original 28-pin MOS > ROMs. > > > Well, there are no unpolulated sockets, so perhaps it's a fair bet that > > there's some extra stuff in there. Goodness knows what, though, all the > > ROMs are MOS 6540's. > > Then there's no extras. The MOS Technology 6540 ROMs are half the > capacity > of the 2332s in later boards, so there are seven of them in a standard > PET > and no spare sockets. > > > Figures :( I've had to do this once already to locate a broken 2114 > (when > > I got the machine, it claimed only 1600 bytes of memory were free). > > Luckily, I have one more spare 2114 (I got two from someone on this > list, > I > > forget who [for which I apologise] and thank them (again) profusely, as > if > > it is a broken 2114, there's a chance the second spare might be > essential). > > I think it was me (and I think you already said thankyou :-)) > > > Also, I know this has been asked & answered before, but what's the best > way > > of cleaning the board? It has more dust on it than I am properly > > comfortable with, and besides it looks horrible. > > > > I'm guessing that *ideally* it should be washed in distilled water with > a > > very soft brush, then left in a warm place to dry thoroughly. OTOH, > maybe > > alcohol would be a better idea? I have some disc head cleaning alcohol > > which would suffice - recommendations please! > > Start by vacuuming it with a powerful vacuum and a soft, small, > paintbrush > (about 1/2" - 1") to help disldge the dirt. You might not need to wash > it > after that. It's not too important for a board like this, but the air > rushing through a plastic vacuum nozzle can generate a surprising amount > of > static, so ideally the nozzle should be conductive, and grounded. > > If you do wash it, use some detergent, do not get it too hot, rinse with > distilled water and a *very small* amount of wetting agent (to help the > water drain). Blowing off the excess with low-pressure compressed air > and/or rinsing in IPA or meths (which mix with water and helps remove it) > may also be a good idea. Do make sure you get all the water out of > places > like IC sockets, switches, and connectors, as residues may eventually > lead > to corrosion. > > In extreme cases, or where I've had a lot of boards to clean, I've used > the > dishwasher -- but do not let the dishwasher do the normal drying cycle as > it's too hot for safety. Some dishwashers seem to use very hot water, > too, > and some types of PCB and some types of plastic don't like that. Don't > use > a dishwasher on boards that have non-sealed relays, transformers, paper > labels, etc. > > -- > Pete Peter Turnbull > Network Manager > University of York > > -- __--__-- > > Message: 16 > From: "Fred deBros" <fdebros(a)verizon.net> > To: <cctalk(a)classiccmp.org> > Subject: RE: Musings on BabyVAX video > Date: Sat, 18 Jan 2003 10:34:21 -0500 > Reply-To: cctech(a)classiccmp.org > > I'm pretty sure that a VS3100-76 with no graphics board *will* come up > using onboard monochrome (use the green signal). > I don't think I've ever actually used one this way, but I do > know that the GPX and SPX options came with a little stick-on > panel that said either "GPX" or "SPX" in about the right size > and font to stick right after the "VAXstation 3100 M76" nameplate. > > Mine does and it is just a matter on which pin you pick it up in the > back of the box! I'd have to go to my office to ck it again. > > Fred > > > -- __--__-- > > Message: 17 > Date: Sat, 18 Jan 2003 15:42:37 GMT > From: pete(a)dunnington.u-net.com > To: cctalk(a)classiccmp.org > Subject: Re: Update: BBC Acorn > Reply-To: cctech(a)classiccmp.org > > On Jan 18, 10:23, Jules Richardson wrote: > > > > Do either of you think you have a Disc 1 for it? > > > > no discs at all I'm afraid :-( hence why I was asking about whther > there's a > > sensible ftp site to put them on so if a working set can be collected > at > least > > they can be archived somewhere (the same goes for manuals really, but > scanning > > those would be a major pain I expect!) > > Well, someone else has offered to copy Disc 1 for me. I've also found a > few other people who have ARM Evaluation Systems, so once I get a good > Disc > 1, I'll put the set of six on my website (and if anyone from any of the > Beeb sites wants to make a copy, that's fine by me). Any suggestions as > to > format to use for the images? > > I've also just been told that the production run of ARM (not ARM2) chips > was 2000. I know some were used in-house for other types of development > system (like the A500) and more were used for Springboard (an ISA card, > the > PC equivalent of the ARM Development System), so 50 or 100 seem likely > numbers for the quantity of ARM Development Kits made to fit Beebs. > > -- > Pete Peter Turnbull > Network Manager > University of York > > -- __--__-- > > Message: 18 > Date: Sat, 18 Jan 2003 10:09:30 -0600 (CST) > From: Doc Shipley <doc(a)mdrconsult.com> > To: cctalk(a)classiccmp.org > Subject: RE: Musings on BabyVAX video > Reply-To: cctech(a)classiccmp.org > > On Sat, 18 Jan 2003, Antonio Carlini wrote: > > > > I thought so too. But what about SPX? Can it go into a > > > pre-M76 VS3100? And what about VS2K SPX? (It would of course > > > be very silly in practice, but I'm talking in principle.) > > > > SPX will go into KA42s - although I don't know for sure whether > > it was ever sold and supported. It will probably plug into a > > VS2K but I have no idea whether it will work (or whether anything > > would run on it without more code being written). > > I'll look when I get home (next month), but I'm pretty sure one of my > VS3100 m38 machines was labelled SPX from the factory. > > Doc > > > -- __--__-- > > Message: 19 > Date: Sat, 18 Jan 2003 15:21:03 +0100 > From: Jochen Kunz <jkunz(a)unixag-kl.fh-kl.de> > To: cctalk(a)classiccmp.org > Subject: Re: VXT X terminal question > Reply-To: cctech(a)classiccmp.org > > On Fri, Jan 17, 2003 at 11:38:58PM -0000, Antonio Carlini wrote: > > > Obviously you have to have a Qbus extension cable and some way > > of connecting it - the easiest way is a VAX 4000-1xx cab :-) > Well, the enclosure is the same. It is only a set of additional > connectors on the back an internal cabling. At least I interpreted > pictures of a VAX4k105 this way. But all I need is the pinout. > Building some cables is no problem and I have a QBus backplane > from a dead and rotten BA23. > > > > Sad that I have not the QBus cabling for my MV3100m95. A 83 > > > MHz NVAX (32 VUPs?) desktop VAX wirh QBus would be nice. > > It would indeed. The VAX 4000-1xx range is something that > > I only rarely got to play on. But there are plenty of > > other Qbus boxes around. > I have a MV II, MV III, MV3900, MV4k200, VAX4k300, VAX4k400 > and a PDP11-73. Enough QBus boxen to play. OK. I miss a KA640 > based machine. But none of them brings that power in that small > footprint and is easy to interface to lots of storage, i.e. > SCSI. > -- > > > > tschu?, > Jochen > > Homepage: http://www.unixag-kl.fh-kl.de/~jkunz > > -- __--__-- > > Message: 20 > Date: Sat, 18 Jan 2003 12:29:24 +0100 > From: Jochen Kunz <jkunz(a)unixag-kl.fh-kl.de> > To: cctalk(a)classiccmp.org > Subject: Re: VXT X terminal question > Reply-To: cctech(a)classiccmp.org > > On Sat, Jan 18, 2003 at 10:50:58AM +0100, Fred N. van Kempen wrote: > > > I have the Ultrix V4.50 source tree [no comment] and will be porting it > > to > > the M76, *and* (which is my target) my beloved 4000-700A. > Someone on the PUPS / TUHS list has ported 4.3BSD-Tahoe and / or > 4.3BSD-Reno to the VAX4000-7xx. AFAIK he had some porblems with > interrupts at autoconfig time, but got it running. > -- > > > > tschu?, > Jochen > > Homepage: http://www.unixag-kl.fh-kl.de/~jkunz > > -- __--__-- > > Message: 21 > From: "Philip Pemberton" <philpem(a)dsl.pipex.com> > To: <cctalk(a)classiccmp.org> > Subject: BBC Micro - assemblers - info needed > Date: Sat, 18 Jan 2003 16:16:39 -0000 > Reply-To: cctech(a)classiccmp.org > > Hi all, > I've just downloaded three assemblers from the ROM archive at > http://bbc.nvg.org . Catch is, none of them include manuals. I've got > copies > of: > VASM65 v2.0E by Vida Rebus > ASM 1.10 by SYSTEM (claims to be the "ASM 6502 Macro assembler > V1.10", > "Copyright (C) 1984 SYSTEM"). Contains text strings like "Press play", so > may be a tape->ROM conversion. > ROMAS 3.02 by TBK Associates (full copyright string = "ROMAS 3.02 > (C)1985 TBK Associates - S.C." > > Has anyone here got any documentation for these assemblers? I'd like > to > get at least one of them to assemble *something*. Perhaps a "Hello World" > program? > Also, Vasm outputs Intel Hex files from what I can gather - does > anyone > here have an Intel Hex -> Binary converter for the BBC Micro? > Finally, does anyone know how some discs were formatted so they were > compatible with 40-track and 80-track disc drives? > > Thanks. > -- > Phil. > philpem(a)dsl.pipex.com > http://www.philpem.dsl.pipex.com/ > > > -- __--__-- > > Message: 22 > Date: Sat, 18 Jan 2003 09:07:36 -0800 (PST) > From: "Peter C. Wallace" <pcw(a)mesanet.com> > To: cctalk(a)classiccmp.org > Subject: RE: Musings on BabyVAX video > Reply-To: cctech(a)classiccmp.org > > On Sat, 18 Jan 2003, Antonio Carlini wrote: > > > > I thought so too. But what about SPX? Can it go into a > > > pre-M76 VS3100? And what about VS2K SPX? (It would of course > > > be very silly in practice, but I'm talking in principle.) > > > > SPX will go into KA42s - although I don't know for sure whether > > it was ever sold and supported. It will probably plug into a > > VS2K but I have no idea whether it will work (or whether anything > > would run on it without more code being written). > > > I have a few VT1300's with SPX badges and SPX cards inside, so at least > the > Xterm verison of the KA42/SPX seems to have been supported... > > > Peter Wallace > > > -- __--__-- > > Message: 23 > Date: Sat, 18 Jan 2003 09:23:06 -0800 (PST) > From: Sellam Ismail <foo(a)siconic.com> > To: <cctalk(a)classiccmp.org> > Subject: Re: IBM 5322 > Reply-To: cctech(a)classiccmp.org > > On Fri, 17 Jan 2003, Tony Duell wrote: > > > The System 23 I briefly worked on (as in 'got inside') had a DE9 > > connector for the printer IIRC. It was a _current loop_ serial port, > and > > of course the character set is EBCDIC (but as you say, that's a minor > > problem). > > I was wondering what that connector was. Now I know :) > > > I think (based on the current loop on the PC Async card) that IBM's > > convention was that transmiters were active and non-isolated, receivers > > were passive and opto-isolated, but do check this before hooking > > anything up. > > Cool, after the punch card project I actually know what you're talking > about ;) > > Sellam Ismail Vintage Computer > Festival > ------------------------------------------------------------------------ > > ------ > International Man of Intrigue and Danger > http://www.vintage.org > > * Old computing resources for business and academia at > www.VintageTech.com > * > > > -- __--__-- > > Message: 24 > Subject: SGI Discussions? was Re: Mac SE/30 accessories availability? > From: David Holland <dholland(a)woh.rr.com> > To: Classic Computer Talk <cctalk(a)classiccmp.org> > Date: 18 Jan 2003 13:07:13 -0500 > Reply-To: cctech(a)classiccmp.org > > Wot about SGI Crimson's? (Or in my case, a Power Series frame, w/ > Crimson boards in it) Or are they too new (and LARGE :-) ) for the > list? > > (Now for the possibly Off List questions of my post) > > I'd like to get hold of a Reality Engine for it as mine (alas) only has > a VGXT boardset. Anyone know where I could find one? > > I'd also be interested if anyone has interfaced a Sun Type 5 mouse to > it, as they look like they use the same protocol, just one is +5v logic, > the other is RS232? (Maxim's MAX232's sound vaguely useful, but they're > hard to find around here in 1sie 2sie counts) > > (The optical mouse I have for it is in too bad a shape to be really > usable anymore - the felts shot, and it sticks to the metal plate/mouse > pad too much for my tastes.) > > The whole thing that torque's me off the worst about it is.. its 3x's > bigger than my PC, and its 3x's quieter... :) > > Anyways, If I'm off list focus, someone point it out to me, and I'll > hush, and wait for the Apple II stuff to respond too.. :-) > > David > > On Fri, 2003-01-17 at 23:19, Brian Chase wrote: > > On Fri, 17 Jan 2003, Zane H. Healy wrote: > > > > > It's not just on a system like that. Earlier this week I got my > first > SGI > > > system, a nice little O2. It's about the crappiest of the O2's, but > it's > > > still a *very* nice UNIX workstation. I thought that it was doing OK > > at > > > surfing until yesterday when I wanted to check something on gamespot, > > it > > > absolutly crawled to a halt trying to render the pages (well the > browser > > > did, the rest of the system was nice and responsive). I swear it > took > close > > > to 10 minutes to get to the third page (the one that had the data I > was > > > curious about). > > > > > > I think I'll now run the browser on my Linux box and retarget it to > the > > > SGI's desktop (at least until I get an Octane). > > > > I'll wait to get an Onyx. Actually, the Origin 2000s are quite lovely, > > too. They're still really off topic for this list. > > > > -brian. > > > > > > -- __--__-- > > Message: 25 > From: M H Stein <mhstein(a)canada.com> > To: "'ClassicComputers'" <cctalk(a)classiccmp.org> > Subject: PET 2001 oddity > Date: Sat, 18 Jan 2003 13:19:36 -0500 > Reply-To: cctech(a)classiccmp.org > > Ethan: thanks for the info; I've never seen a > dynamic RAM 2001N, although a friend of mine > home-brewed a static > dynamic conversion. > 4032s of course, but I take it you're talking > about a real small-B/W-screen 2001. > > I sometimes toy with the idea of building > a PET using modern chips; shouldn't be too > big a deal (very low on my to-do list though). > > Adrian: Was working on adding my .02 to the > discussion, but read on and saw that you're > in business. If you can't find any locally, > I've got several tubes of 2114s here in frosty > Canada. And they are used in pairs because > they're only 4 bits wide (x 1K). > > One of my PETs, with an MTU graphics board, > is dead as well; this discussion just might > motivate me to have a look at it. > > Good luck! > > mike > > > -- __--__-- > > Message: 26 > From: M H Stein <mhstein(a)canada.com> > To: "'ClassicComputers'" <cctalk(a)classiccmp.org> > Subject: T&B Ansley IDC connectors > Date: Sat, 18 Jan 2003 13:25:29 -0500 > Reply-To: cctech(a)classiccmp.org > > > ---------------Original Message--------------- > Subject: T&B Ansley IDC connectors > From: "Jeffrey H. Ingber" <jingber(a)ix.netcom.com> > Date: 17 Jan 2003 19:17:20 -0500 > > Does anyone know where I can aquire the T&B ansley "light blue" IDC > ribbon cable connectors that were used by MITS? > > Googling reveals that Tyco purchased this line of connectors in 2001, > but I can't find any mention of T&B Ansley on their web site. > > Thanks, > Jeff > ------------------------------------------------------- > Used to use a lot of these & have a few left; Exactly which ones are > you looking for? > > mike > > > -- __--__-- > > Message: 27 > From: M H Stein <mhstein(a)canada.com> > To: "'ClassicComputers'" <cctalk(a)classiccmp.org> > Subject: PerSci Model 277 Dual 8" Floppy Drives - Info Needed > Date: Sat, 18 Jan 2003 13:29:05 -0500 > Reply-To: cctech(a)classiccmp.org > > ---------------------Original Message------------------------- > From: "Tim Myers" <tim.myers(a)sunplan.com> > To: <cctalk(a)classiccmp.org> > Subject: PerSci Model 277 Dual 8" Floppy Drives - Info Needed > > Does anyone have any info on these drives? I have some in a CP/M system > (Ithaca Intersystems DPS-1), and they seem completely dead. They have an > electric load mechanism, but when I insert a disk, nothing happens. > Popped the case and can't see anything obviously out of place. > > Tim. > ------------------------------------------------------------------------- > Cromemco used these in early models of the System 3; not exactly the most > reliable. Sorry to say, I scrapped several of them a year ago and, > although > I've > got manuals for most Cromemco stuff I don't think I've got any docs on > these. > > But I'll have a look and let you know if I find anything. Meanwhile, > there > are > probably several people on this list who have them and could perhaps at > least compare notes with ya. They are getting power? > > Good luck, > > mike > > > -- __--__-- > > Message: 28 > From: ard(a)p850ug1.demon.co.uk (Tony Duell) > Subject: Re: About Electronics Questions > To: cctalk(a)classiccmp.org > Date: Sat, 18 Jan 2003 19:32:58 +0000 (GMT) > Reply-To: cctech(a)classiccmp.org > > > The biggest thing however for anybody doing repair > > is get all the doc's you can even before you start > > repairing something.A schematic is a very useful > > Agreed (why do you think I have a few _thousand_ scheamtics/repair > manuals...). However, the schematic is not always available (maybe not > anywhere any more), so it can be useful to be able to make guesses and > 'find your way aobut' without a schematic. Alas this comes with (a lot > of) practice... > > > PS Caps are the first thing to go in any equiment > > unless you let the magic smoke out first. > > Hmmm.. Not always. I've had a number of HP98x0 machines on the bench in > the last few months. I've had to change _one_ electrolytic capacitor and > about 20 TTL chipes (particularly 74Hxx parts). And we all know that 2114 > RAM chips are often dead... > > -tony > > -- __--__-- > > Message: 29 > Date: Sat, 18 Jan 2003 19:13:48 -0800 > To: cctalk(a)classiccmp.org > From: "Zane H. Healy" <healyzh(a)aracnet.com> > Subject: RE: Dear Santa, I would like a VAX.... > Reply-To: cctech(a)classiccmp.org > > >Didn't see one at a fiver. Saw > >http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=1484&item=23017 > >94356 > >which is claimed to be a UV3100-95. Assuming it is, then it's > >a darned fast VAX (in VAX terms) and really well worth having. > > That's one nice VAX, I'm glad it's on the other side of the pond :^) > > >The DLT looks more like a TZ30 to me (still nice to have) and > > A good indication that it's a TZ30 is that it's a half-height drive. The > TZ30 is the only half-height drive that uses Compact-Tapes. > > Zane > -- > | Zane H. Healy | UNIX Systems Administrator | > | healyzh(a)aracnet.com (primary) | OpenVMS Enthusiast | > | | Classic Computer Collector | > +----------------------------------+----------------------------+ > | Empire of the Petal Throne and Traveller Role Playing, | > | PDP-10 Emulation and Zane's Computer Museum. | > | http://www.aracnet.com/~healyzh/ | > > -- __--__-- > > Message: 30 > Date: Sat, 18 Jan 2003 19:26:42 -0800 (PST) > From: Sellam Ismail <foo(a)siconic.com> > To: <cctalk(a)classiccmp.org> > Subject: Re: Dear Santa, I would like a Yamaha CX5M ... > Reply-To: cctech(a)classiccmp.org > > On Sat, 18 Jan 2003, Cameron Kaiser wrote: > > > Anyone ever seen someone out there trying to get rid of a Yamaha CX5M? > It's > > about the only MSX machine I have significant curiosity about due to > its > > specialised music abilities. > > Yes, and I helped them get rid of it by taking it away for them ;) > > Sellam Ismail Vintage Computer > Festival > ------------------------------------------------------------------------ > > ------ > International Man of Intrigue and Danger > http://www.vintage.org > > * Old computing resources for business and academia at > www.VintageTech.com > * > > > -- __--__-- > > Message: 31 > Date: Sat, 18 Jan 2003 21:38:05 -0600 (CST) > From: Tothwolf <tothwolf(a)concentric.net> > To: Classic Computer <cctalk(a)classiccmp.org> > Subject: Re: Apple 1 schematics > Reply-To: cctech(a)classiccmp.org > > On Sat, 18 Jan 2003, chris wrote: > > > In reading my copy of Collectible Microcomputers (yes yes, you all get > > it by now, I like the book... ok, I'll stop refering to it after > > this)... I noticed in the Apple Computer section a mention of how > > Apple's first customers were the folks that got schematics for the > Apple > > 1 when it was first shown at Home Brew. > > > > Although I already knew that they alledgedly gave out schematics... I > > began to wonder A: did they really (probably) and B: do any copies > exist > > anywhere? > > > > I thought it might be a fun project to try an build an Apple 1 from the > > schematics... just as the first users probably did. So, does anyone > know > > if they are available, or does anyone have a copy and might want to > send > > me a set? Or are copies just as elusive as the Apple 1 itself and there > > is no shot in ever getting them. > > Ok, I guess its time I post on the list about this... > > I've been thinking about this very project for sometime. The main > problems > that I came up with are: > 1. certain parts are difficult to find > 2. ROM source and/or binary image availability > 3. re-creating the pc boards > > The first problem should be possible to overcome either by finding a > stock > of surplus parts, or should significant demand exist, having the parts > made by a company that specializes in fabricating out of production > parts. > I've actually looked into the later a couple times in the past, and the > prices didn't seem to be out of line. I've even wondered if it would be > possible to get a copy of the mask from Intel for say the i8008 or i4004 > and have reproductions made. > > The second and third problems may be slightly more difficult to overcome. > One option would be to find an Apple 1, dump the ROMs, carefully unsolder > all the parts and scan each side of the cleaned pc boards. The scanned > images can then be used to create gerber files. I personally don't have > the funds to go out and buy an Apple 1, and I don't know of anyone who > would give up one just for it to be taken to bits. > > Another option for the second and third problems is to contact Woz and > see > if he would be willing to help. I have so far restrained myself from > emailing him, since I know he gets tons and tons of emails, including > people asking him if he has an Apple 1 he could give them, etc. I'd > imagine Woz would very much like to see the Apple 1 preserved, but it > would probably take him quite a bit of time to find all the docs and info > that we'd need. > > -Toth > > -- __--__-- > > Message: 32 > Date: Sat, 18 Jan 2003 22:41:14 -0500 > From: David Gesswein <djg(a)drs-esg.com> > To: cctalk(a)classiccmp.org > Subject: Re: Wanted : Pinouts for 9311, 93L14, 8273 chips > Reply-To: cctech(a)classiccmp.org > > Subject: Wanted : Pinouts for 9311, 93L14, 8273 chips > > Fairchild 9311 (4 bit -> 16 line decoder?) > > 1 of 16 decoder > > 1 : 0 > 2 : 1 > 3 : 2 > 4 : 3 > 5 : 4 > 6 : 5 > 7 : 6 > 8 : 7 > 9 : 8 > 10 : 9 > 11 : 10 > 12 : Gnd > 13 : 11 > 14 : 12 > 15 : 13 > 16 : 14 > 17 : 15 > 18 : E1 > 19 : E2 > 20 : A3 > 21 : A2 > 22 : A1 > 23 : A0 > 24 : Vcc > > E1 and E2 both low to enable output. Outputs 0-15 are active low > > Fairchild 93L14 (latch?) > Probably same as NSC > http://www.national.com/ds/93/93L14.pdf > > Signetics 8273 (10 bit serial-in, parallel out shift register) > > 1 : Q6 > 2 : Q7 > 3 : Q8 > 4 : Q9 > 5 : Q10 > 6 : ClK1/ > 7 : CLK2 > 8 : Gnd > 9 : Clr/ > 10 : Serial In > 11 : Q1 > 12 : Q2 > 13 : Q3 > 14 : Q4 > 15 : Q5 > 16 : Vcc > > Clk2 low and clk1 works > clk1 high and clk2 works > clk1 feeds an inverter then is ored with clk2 and result inverted to > clock the flip flops. > > David Gesswein > http://www.pdp8.net/ -- Run an old computer with blinkenlights. > > -- __--__-- > > Message: 33 > Date: Sat, 18 Jan 2003 21:53:42 -0600 (CST) > From: Tothwolf <tothwolf(a)concentric.net> > To: cctalk(a)classiccmp.org > Subject: Re: DOS 1.0 > Reply-To: cctech(a)classiccmp.org > > On Mon, 13 Jan 2003, Live Wire wrote: > > > > I do also memember Wordstar and it's arcane command sequences. Those > > > commands persisted though, through a number of ordinary text editors > > > for programmers & such. > > > > http://sourceforge.net/projects/joe-editor/ > > > > This is as close to wordstar and the WS CTRL-K-x command set I have > > found. I used to use wordstar on a tiny portable computer with a 4 line > > display to write asm for the amiga 500 and then dump it via the built > in > > modem. Joe is my favorite editor today, though I find myself living in > > vi for the most part... > > I use 'joe' constantly myself. It's my day to day editor for editing > source code. I have used vi and vim somewhat, but I've honestly not yet > taken the time to learn vi as well as I should. I'm sure I must be > missing > out by not using vi (well, thats what other software developers tell me), > but joe is fast and does what I need it to. > > Somewhere, I have a complete Wordstar set for the Apple II. IIRC, I > pulled > it and some other complete Apple II software from a trash pile back in > 1998 or so. > > -Toth > > -- __--__-- > > Message: 34 > Date: Sat, 18 Jan 03 11:13:01 PST > From: msokolov(a)ivan.Harhan.ORG (Michael Sokolov) > To: cctalk(a)classiccmp.org > Subject: RE: Hobbled NVAX > Reply-To: cctech(a)classiccmp.org > > Antonio Carlini <arcarlini(a)iee.org> wrote: > > > I doubt that non-hobbled firmware exists. I doubt you > > could just use the UV3100-96 firmware upgrade on a > > UV3100-85 and have it work. In fact, I guess the firmware > > is the same but it looks at the machine's hardware (e.g. > > size and config of backup cache or something like that) > > to determine what it is running on, and disables the VIC > > if it thinks the machine is a UV3100-85. > > Umm, I don't think so. It looks like the firmware is the only difference > between M85 and the equivalent M9x model and the hardware is the same. In > > this > case flashing M9x firmware would obviously give you the M9x model. But > even > if > the M85 board was really different in B-cache or something from all M9x > models, > I doubt that the firmware could detect this by "looking at the hardware". > > AFAIK > it's the firmware that has to tell the chips how the board is configured, > > not > the other way around. > > If indeed the hobbled and non-hobbled firmware are the same code, what it > > looks > at to make the decision is most probably a flag in the second longword of > > the > ROM. > > > The easiest thing to do would be to try reenabling the VIC. > > If that is not enough, you would have to find the bit of code > > that disables the VIC and NOP it out. > > Well, if it munges the microcode I would go for option 2 in any case. > > BTW, do you know for sure that it really munges the microcode and not > just > disables the VIC in the same way normal caches from CVAX onward can be > enabled > and disabled as you like? > > MS > > -- __--__-- > > Message: 35 > From: "Gareth Knight" <knight.beat(a)ntlworld.com> > To: <cctalk(a)classiccmp.org> > Subject: New classic > Date: Sat, 18 Jan 2003 19:20:36 -0000 > Reply-To: cctech(a)classiccmp.org > > http://c64upgra.de/c-one/s_pictures.htm > First pictures of the CommodoreOne pre-production board are now online: > ""the pictures section has been extended by 11 pictures of the > pre-production board. Basic testing has already been done, all chips are > responding positively to diagnostic access. A 100% test procedure will be > developed this weekend." > -- > Gareth Knight > Amiga Interactive Guide | Team *AMIGA* member > http://amiga.emugaming.com | http://www.amigau.com/aig/index.html > > > > -- __--__-- > > Message: 36 > Date: Sat, 18 Jan 03 11:28:06 PST > From: msokolov(a)ivan.Harhan.ORG (Michael Sokolov) > To: cctalk(a)classiccmp.org > Subject: RE: VXT X terminal question > Reply-To: cctech(a)classiccmp.org > > Fred N. van Kempen <Fred.van.Kempen(a)microwalt.nl> wrote: > > > Ugh. Make that V4.20, obviously. Development is done on my V4.5 box.. > > > > Shitty thing is, that I probably will also have to run a 4.2 system as > > a second-step system for bootstrapping, and I dont have a 4.2/vax tk50 > > or cd set. > > Why can't you compile and use the V4.20 kernel on your V4.50 system? > > BTW, have you tried booting VXT on different VS3100s? I would really like > > to > use a KA43 for my own VXT if possible, but I need to know if it is or > not. > > MS > > -- __--__-- > > Message: 37 > Date: Sat, 18 Jan 2003 15:23:31 -0500 (EST) > From: vance(a)neurotica.com > To: cctalk(a)classiccmp.org, <geeks(a)sunhelp.org> > Subject: MCA Fast Ethernet Cards > Reply-To: cctech(a)classiccmp.org > > > Would the people who wanted the PS/2 100Mbps ethernet cards send me an > email? I have access to them now and can ship soon. > > Peace... Sridhar > > > -- __--__-- > > Message: 38 > Date: Sat, 18 Jan 2003 12:32:12 -0800 (PDT) > From: Brian Chase <vaxzilla(a)jarai.org> > To: Classic Computer Talk <cctalk(a)classiccmp.org> > Subject: Re: SGI Discussions? > Reply-To: cctech(a)classiccmp.org > > On 18 Jan 2003, David Holland wrote: > > > Wot about SGI Crimson's? (Or in my case, a Power Series frame, w/ > > Crimson boards in it) Or are they too new (and LARGE :-) ) for the > > list? > > Pfft! You call that large!? There are plenty of folks on this list > who'd mock the relatively dainty size of the SGI Power Series frames. > There are people on the list with IBM mainframes, PDP-10s, big VAXen, > and a few Crays. > > > (Now for the possibly Off List questions of my post) > > > > I'd like to get hold of a Reality Engine for it as mine (alas) only has > > a VGXT boardset. Anyone know where I could find one? > > > > I'd also be interested if anyone has interfaced a Sun Type 5 mouse to > > it, as they look like they use the same protocol, just one is +5v > logic, > > the other is RS232? (Maxim's MAX232's sound vaguely useful, but > they're > > hard to find around here in 1sie 2sie counts) > > > > (The optical mouse I have for it is in too bad a shape to be really > > usable anymore - the felts shot, and it sticks to the metal plate/mouse > > pad too much for my tastes.) > > I'll see if we have any spare older mice. I know at least with the Indy > and Indigo2s onward they all used regular PS/2 mice. I'm not sure about > the Onyx systems, or the gear predating the mid-1990s time frame. My > introduction to SGI equipment came around 1994 or so. > > About a year ago my employer returned several pallets worth of Indigo2s > and Indys (~80-100 systems) to SGI for trade ins on Octane2s. It took > about 6 months for SGI to even bother to come and pick them up. I've a > feeling they all ended up being dumpstered once they got back to SGI. > Saving them was out of the question as a list of serial numbers had been > given to SGI; because they were trade ins, they actually had to be > traded in. It's too bad. > > On another note, perhaps more related to the list, the new building that > the Computer History Museum is moving into is actually the old SGI > headquarters on Shoreline Dr. in Mountain View. It's a lovely building; > I can't wait until they get things prettied up and moved into the new > location. > > -brian. > > > -- __--__-- > > Message: 39 > From: "Antonio Carlini" <arcarlini(a)iee.org> > To: <cctalk(a)classiccmp.org> > Subject: RE: VXT X terminal question > Date: Sat, 18 Jan 2003 20:51:41 -0000 > Organization: me@home > Reply-To: cctech(a)classiccmp.org > > > Well, the enclosure is the same. It is only a set of additional > > connectors on the back an internal cabling. At least I interpreted > > pictures of a VAX4k105 this way. But all I need is the pinout. > > Building some cables is no problem and I have a QBus backplane > > from a dead and rotten BA23. > > I have a UV3100-90 and I've been close to a VAX 4000-100 (it > just wasn't mine). The VAX 4000-100 enclosure has a distinctive > sloping part at the back which houses the Qbus (and DSSI?) > connectors. I didn't get to look closely enough to see whether > this housing is an add-on to the UV3100-90 enclosure or the whole > case is a manufacturing modification of that enclosure. Either way, > the standard shipping UV3100-90 enclosure does not have anywhere > for Qbus and DSSI connectors. > > I'll look for pinouts if I can dig up the right docs. > > Antonio > > -- > > --------------- > Antonio Carlini arcarlini(a)iee.org > > > -- __--__-- > > Message: 40 > Date: Sat, 18 Jan 2003 16:04:54 -0500 (EST) > From: "r. 'bear' stricklin" <red(a)bears.org> > To: cctalk(a)classiccmp.org > Subject: RE: Musings on BabyVAX video > Reply-To: cctech(a)classiccmp.org > > On Sat, 18 Jan 2003, Doc Shipley wrote: > > > I'll look when I get home (next month), but I'm pretty sure one of my > > VS3100 m38 machines was labelled SPX from the factory. > > I just hauled home an m38 that had... an SPX installed. Right after I > bought an SPX card for my m76, to replace the GPX in it. The two SPX > cards > are identical in every way (except possibly dustiness). > > ok > r. > > -- __--__-- > > Message: 41 > Date: Sat, 18 Jan 2003 16:08:55 -0500 (EST) > From: "r. 'bear' stricklin" <red(a)bears.org> > To: Classic Computer Talk <cctalk(a)classiccmp.org> > Subject: Re: SGI Discussions? was Re: Mac SE/30 accessories availability? > Reply-To: cctech(a)classiccmp.org > > On Sat, 18 Jan 2003, David Holland wrote: > > > (The optical mouse I have for it is in too bad a shape to be really > > usable anymore - the felts shot, and it sticks to the metal plate/mouse > > pad too much for my tastes.) > > Uh.. > > Or you could go spend $1 on some felt and glue at the craft store, and > fix > it. > > ok > r. > > -- __--__-- > > Message: 42 > Subject: RE: VXT X terminal question > Date: Sat, 18 Jan 2003 22:14:35 +0100 > From: "Fred N. van Kempen" <Fred.van.Kempen(a)microwalt.nl> > To: <cctalk(a)classiccmp.org> > Reply-To: cctech(a)classiccmp.org > > All, > > Although I have both the M38 and M76 set up, I cant get the video > part to work - tube (that is on a VXT2000 right now) doesn't seem > to sync on either model. The M38 is standard, the M76 is the SPX > model. Anyone have a clue? > > --fred > > -- __--__-- > > Message: 43 > Subject: Apple 1 schematics > Date: Sat, 18 Jan 2003 16:22:30 -0500 > From: chris <cb(a)mythtech.net> > To: "Classic Computer" <cctalk(a)classiccmp.org> > Reply-To: cctech(a)classiccmp.org > > In reading my copy of Collectible Microcomputers (yes yes, you all get it > by now, I like the book... ok, I'll stop refering to it after this)... I > noticed in the Apple Computer section a mention of how Apple's first > customers were the folks that got schematics for the Apple 1 when it was > first shown at Home Brew. > > Although I already knew that they alledgedly gave out schematics... I > began to wonder A: did they really (probably) and B: do any copies exist > anywhere? > > I thought it might be a fun project to try an build an Apple 1 from the > schematics... just as the first users probably did. So, does anyone know > if they are available, or does anyone have a copy and might want to send > me a set? Or are copies just as elusive as the Apple 1 itself and there > is no shot in ever getting them. > > -chris > <http://www.mythtech.net> > > > -- __--__-- > > Message: 44 > Subject: RE: VXT X terminal question > Date: Sat, 18 Jan 2003 22:23:32 +0100 > From: "Fred N. van Kempen" <Fred.van.Kempen(a)microwalt.nl> > To: <cctalk(a)classiccmp.org> > Reply-To: cctech(a)classiccmp.org > > Jochen writes: > > > Someone on the PUPS / TUHS list has ported 4.3BSD-Tahoe and / or > > 4.3BSD-Reno to the VAX4000-7xx. AFAIK he had some porblems with > > interrupts at autoconfig time, but got it running. > Heh. This is not too hard, but *only* if he used the machine with > a KFQSA (DSSI-to-MSCP) controller, rather than the onboard SHAC. > > It'd be a start, though. Michael, was this you? > > --fred > > -- __--__-- > > Message: 45 > Date: Sat, 18 Jan 03 13:44:31 PST > From: msokolov(a)ivan.Harhan.ORG (Michael Sokolov) > To: cctalk(a)classiccmp.org > Subject: RE: VXT X terminal question > Reply-To: cctech(a)classiccmp.org > > Fred N. van Kempen <Fred.van.Kempen(a)microwalt.nl> wrote: > > > > Someone on the PUPS / TUHS list has ported 4.3BSD-Tahoe and / or > > > 4.3BSD-Reno to the VAX4000-7xx. AFAIK he had some porblems with > > > interrupts at autoconfig time, but got it running. > > Heh. This is not too hard, but *only* if he used the machine with > > a KFQSA (DSSI-to-MSCP) controller, rather than the onboard SHAC. > > > > It'd be a start, though. Michael, was this you? > > Not me. My 4.3BSD suffix is Quasijarus, not Tahoe or Reno. But my opinion > > on > SHAC is radically different from yours. SHAC is a darling beauty. It is a > problem only for cheap OSes like NutBSD and Linsux. Since SHAC is a true > CI > host adapter with the true Generic VAX Port (GVP) it is perfectly > supported > by > the SCA CI port driver present in every proper VAX OS with SCA such as > Ultrix. > Although DEC killed VAX Ultrix before MicroVAXen with SHAC came about, > source > examination shows that the Ultrix V4.20 CI port driver supports SHAC (on > XMI). > Some day I will lift the SCA code wholesale from Ultrix and plop it into > 4.3BSD-Quasijarus. > > MS > > -- __--__-- > > Message: 46 > Date: Sat, 18 Jan 2003 14:13:56 -0800 (PST) > Subject: Re: Apple 1 schematics > From: "Eric Smith" <eric(a)brouhaha.com> > To: <cctalk(a)classiccmp.org> > Reply-To: cctech(a)classiccmp.org > > chris asks about Apple I schematics. > > Although I already knew that they alledgedly gave out schematics... I > > began to wonder A: did they really (probably) and B: do any copies > exist > > anywhere? > > A: Yes. > B: Google is your friend. > > > I thought it might be a fun project to try an build an Apple 1 from the > > schematics... > > It's *extremely* difficult to find some of the Apple I parts, which have > been out of production for over years. Particularly the seven 1024-bit > MOS shift registers, and one hex-40-bit MOS shift register. > > > just as the first users probably did. > > Not quite, since they had a PCB. (Unless you plan to lay out a PCB > yourself.) > > > > > -- __--__-- > > Message: 47 > Date: Sat, 18 Jan 2003 22:16:19 +0000 > From: John Honniball <coredump(a)gifford.co.uk> > Organization: Stoke Gifford Computer Museum > To: cctalk(a)classiccmp.org > Subject: Re: Got the second batch of -11 equipment > Reply-To: cctech(a)classiccmp.org > > Bill Bradford wrote: > > Anybody want two RL02s (by the way, how the hell do I get the top > covers > > open? The "switch" on the top wont budge), and two RL01s? > > If the RL02s are like the RL01, there's a little metal panel on the > side, near the "switch". Unscrew that, and you should see the solenoid > interlock mechanism. Fiddle with that, and the "switch" should open > the top cover. > > You'll need to lock the heads down if you're going to ship the drives. > There's a little metal flap below the head carriage, visible with the > top cover open and no pack in the drive. A single screw holds it in the > "open" position. Loosen the screw, turn the flap 90 degrees, then > tighten the screw. The flap is now in front of the head carriage, > preventing it from moving. > > > Pickup in Austin, Texas.. > > I know someone here in Bristol who'd take the RL02s, if they weren't > so far away. > > -- > John Honniball > coredump(a)gifford.co.uk > > > -- __--__-- > > Message: 48 > Date: Sat, 18 Jan 2003 22:19:34 +0000 > From: John Honniball <coredump(a)gifford.co.uk> > Organization: Stoke Gifford Computer Museum > To: cctalk(a)classiccmp.org > Subject: Re: Apple 1 schematics > Reply-To: cctech(a)classiccmp.org > > chris wrote: > > Although I already knew that they alledgedly gave out schematics... I > > began to wonder A: did they really (probably) and B: do any copies > exist > > anywhere? > > Parts of the Apple I schematics are shown in the second edition of > "Fire In The Valley". Not enought to build a complete replica, > though. You can see, however, that there's an option for installing > either a 6502 CPU or a 6800. > > -- > John Honniball > coredump(a)gifford.co.uk > > > > > End of cctech Digest > > --- > Incoming mail is certified Virus Free. > Checked by AVG anti-virus system (http://www.grisoft.com). > Version: 6.0.443 / Virus Database: 248 - Release Date: 1/10/2003 > > > --- > Outgoing mail is certified Virus Free. > Checked by AVG anti-virus system (http://www.grisoft.com). > Version: 6.0.443 / Virus Database: 248 - Release Date: 1/10/2003 > > __________________________________________________ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com End of cctech Digest --- Incoming mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.443 / Virus Database: 248 - Release Date: 1/10/2003 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.443 / Virus Database: 248 - Release Date: 1/10/2003

23 years, 3 months

2
1
0 0

Quasijarus 4.3BSD on 1600bpi magtape

by jwillis＠arielusa.com

Awesome. I don't have the drive yet, but it seems to me to be the best option for getting BSD loaded on my VAX 11/750. Apologies if this is coming through as MIME. Micro$haft outlook web access won't let me set plain text. Thanks again, John W. -----Original Message----- From: Michael Sokolov Sent: Tue 1/21/2003 11:41 PM To: cctalk(a)classiccmp.org Cc: Subject: Re: Quasijarus 4.3BSD on 1600bpi magtape jwillis(a)dahmer.vistech.net wrote: > Does anyone know of a source for Quasijarus 4.3BSD on 1600bpi magtape? (TU80) Anyone with a 9-track tape unit (I'm sure there are plenty such people on this list) should be able to write you a set of tapes from the images on my FTP site. There is even a FORMAT.1600 file there telling you what to put on which tape and in which order. A friend of mine is holding a working TU81 for me and while I would love to get it operational, I don't feel like bringing it into this apartment, especially since I may have to move again in 6 months... MS

23 years, 3 months

2
1
0 0

Quasijarus 4.3BSD on 1600bpi magtape

by msokolov＠ivan.Harhan.ORG

"John Willis" <jwillis(a)arielusa.com> wrote: > This is a multi-part message in MIME format. > > ------_=_NextPart_001_01C2C1E2.BE18F359 > Content-Type: text/plain; > charset="utf-8" > Content-Transfer-Encoding: base64 > > QXdlc29tZS4gSSBkb24ndCBoYXZlIHRoZSBkcml2ZSB5ZXQsIGJ1dCBpdCBzZWVtcyB0byBtZSB0 > byBiZSB0aGUgYmVzdA0Kb3B0aW9uIGZvciBnZXR0aW5nIEJTRCBsb2FkZWQgb24gbXkgVkFYIDEx > Lzc1MC4NCiANCkFwb2xvZ2llcyBpZiB0aGlzIGlzIGNvbWluZyB0aHJvdWdoIGFzIE1JTUUuIE1p > Y3JvJGhhZnQgb3V0bG9vayB3ZWINCmFjY2VzcyB3b24ndCBsZXQgbWUgc2V0IA0KcGxhaW4gdGV4 > dC4NCiANClRoYW5rcyBhZ2FpbiwNCkpvaG4gVy4NCg0KCS0tLS0tT3JpZ2luYWwgTWVzc2FnZS0t > LS0tIA0KCUZyb206IE1pY2hhZWwgU29rb2xvdiANCglTZW50OiBUdWUgMS8yMS8yMDAzIDExOjQx > IFBNIA0KCVRvOiBjY3RhbGtAY2xhc3NpY2NtcC5vcmcgDQoJQ2M6IA0KCVN1YmplY3Q6IFJlOiBR > [...] > [rest of garbage stripped] Would you mind writing in ASCII so that people using Classic Computers can read it? I have no idea what you've wrote as I can't read it. MS

23 years, 3 months

1
0
0 0

Quasijarus 4.3BSD on 1600bpi magtape

by msokolov＠ivan.Harhan.ORG

jwillis(a)dahmer.vistech.net wrote: > Does anyone know of a source for Quasijarus 4.3BSD on 1600bpi magtape? (TU80) Anyone with a 9-track tape unit (I'm sure there are plenty such people on this list) should be able to write you a set of tapes from the images on my FTP site. There is even a FORMAT.1600 file there telling you what to put on which tape and in which order. A friend of mine is holding a working TU81 for me and while I would love to get it operational, I don't feel like bringing it into this apartment, especially since I may have to move again in 6 months... MS

23 years, 3 months

1
0
0 0

What's better than canned air?

by n8uhn＠yahoo.com

i usually use a vacuum cleaner (a 30+ year old kingston canister) and a long brush made for ceramic/pottery cleaning and painting. the brush has a foot long handle and a 1 inch wide bruch - perfact for most places. the round brush vac attachment is good for cabinent's and the like but i don't use it on boards (static reasons). i do use oil less and oil filled air compressers,but after the compresser i have an air dryer going into a regulator. the regulator keeps the extra and non extra chips on the board ;-) as long as you use the plastic "bowl" inline drier (around 40 - 50 us dollars) it will keep the oil/water out of the regulator and off of your equipment. i use the vac/brush the most and save the air rig for the really tough job's and spots. Bill Date: Tue, 21 Jan 2003 13:46:59 +0100 To: cctalk(a)classiccmp.org Subject: Re: What's better than canned air? Reply-To: cctech(a)classiccmp.org On Tue, Jan 21, 2003 at 05:27:49AM -0600, Jeffrey Sharp wrote: > Discuss, please. What do *you* use instead of consumer canned air? - Brush and vacuum cleaner. - Compressor. Use one that runs without oil. Some compressors need oil to run and are "contaminating" the air with it. Somtimes there are litle extra devices on the compressor to put a bit of oil into the air. Air driven machines need it. But it is not good for electronics. - Sometimes warm water and a brush to "simulate" a dishwasher. See the endless dishwasher discussion. Soak PCBs after washing in Isoprop and let it dry for some days. -- tschüß, Jochen Homepage: http://www.unixag-kl.fh-kl.de/~jkunz/ __________________________________________________ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com

23 years, 3 months

1
0
0 0

About Electronics Questions

by dwightk.elvey＠amd.com

Hi Your questions about caps in old amps are surely OT. The PIC stuff is at least close. Still for both of these, there are better place. It sounds like you've not even researched News Groups. 'rec.antiques.radio&phono' is surely a better place for your amplifier question and groups like 'comp.arch.embedded.piclist' would surely be a better place for your pic questions. Why, when there are plenty of other resourses that are better, would you think that OT subjects are OK to dump on this list that is suppose to be dedicated to old computers. This isn't the only resourse on the net. Dwight >From: liste(a)artware.qc.ca > >Another question would be : where should one go to discuss electronics? I >have 2 projects I'd like some feedback on : repairing an ancient guitar >tube amp (specifically, I think the caps in the power supply are >hosored, causing a loud humm... but where to buy high voltage caps of >non-standard capcitance?), and I'd really like to get into PIC programming. > I'd really like to have a resource where I can ask all the newbie >questions that crop up. (Yes, I've RTFMed, but far to often there's >little subtle things that aren't obvious, but that someone with experience >will know. > > >On 16-Jan-2003 Tony Duell wrote: >> Perhaps it should be user-programmable (or patchable in the case of >> an analogue machine). This would rule out embedded microcontorllers, >> but would allow computers based round microcontrollers (the Philips >> G7000 (Magnavox something-or-other) has an 8048 as the main CPU, but I >> don't think many would call it a microcontroller, for example). > >Odessey? > >-Philip >

23 years, 3 months

4
3
0 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb