test-drb

test-drb@ccmp.vtda.org

101090 discussions

by ard＠p850ug1.demon.co.uk

It's of no real interet to me at the momnet (obivously) but this month's Elektor magazine (the summer double issue, so it's not cheap!) has a project to make a USB to GPIB interface. It's little more than a programemd PIC which directly drives the GPIB lines without buffers. I don't like that much, but... I think you can get source code for the firmware (apart from the USB routines, which are standard routins from Microchip). May be of interest to somebody here.... -tony

13 years, 9 months

Minigame Compo 2012 officially started (submit by Nov 30 2012)

by barythrin＠yahoo.com

Just spreading the word amongst a few of the groups that may have interest and talent in older and more efficient programming past. http://minigamecompo.weebly.com/index.html has begun and will be accepting submissions I believe until November 30th (2012). For those who aren't familiar this is a competition to write the best game they can in the category of under 1k, 2k, or 4k of code for various (usually 8-bit) platforms. They have some screen shots of previous programs that have competed to see what sort of stuff comes out of it. I always find it entertaining. I have no affiliation with them, just helping spread the word since I haven't seen it announced in my usual hangouts yet. - John

13 years, 9 months

Whereabouts of Arthur Gill

by vaxorcist＠googlemail.com

Is: Arthur Gill author of: "Machine and assembly language programming of the PDP-11" still alive? Anyone knows how to get in contact? Regards Ulli

13 years, 9 months

pertec rk05 rack ebay listing :'( my F bomb alert. ran frustration

by tdk.knight＠gmail.com

sigh theres a buisnes partner fight going on and i am caught in the midle GAH!!!!!!! to tune of 1300 bucks.......... something i paid for has been relisted under the partners new account sent him a msg unhappy don't bid http://www.ebay.com/itm/Vintage-Computer-Equipment-Pertec-T6840-9-45-U2-DEC… an ebay complaint has been filled and reported blah blah blah i have now got a paypal dispute finally txs to this re-listing and its pretty esay to prove its the same item the origonal listing i won from user uncolect whos sold me many things befor this happened and shipped them so i am upset wish he coulda phoned me i only left him my number half a dozen times......... http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=160748462238&ssPageName=… i feel like crying all i wanted was my rk05's and pertec god damit why did it have to come to this now what am i guna do with my pertect interface card i got :"(

13 years, 9 months

E&L Instruments Fox 1 Z80 Trainer chip questions

by INFATEC-Soellner＠t-online.de

Hello robo Are you still interested in information about FOX MT80? I could provide You with original manual and schematics. With best regards Heinrich ____________________________________________________________________________ _________ INFATEC Ingenieurb?ro f?r Automatisierungstechnik GmbH Leo-Rosenblatt-Weg 2b D-30453 Hannover Heinrich S?llner Telefon +49 (0) 511/8094048 Telefax +49 (0) 511/8092310 home <http://www.infatec-gmbh.com/> www.infatec-gmbh.com E-Mail <mailto:INFATEC-Klebl at t-online.de> INFATEC-Soellner at t-online.de Gesch?ftsf?hrer: Rolf Klebl Sitz der Gesellschaft: Hannover Registergericht: Hannover HRB 54 193 Hannoversche Volksbank 4813 499 600 (BLZ 251 900 01) ____________________________________________________________________________ _________ DIESE EMAIL IST VERTRAULICH UND KANN DEM BERUFSGEHEIMNIS UNTERLIEGEN. WENN SIE NICHT DER VORGESEHENE ADRESSAT SIND, BENACH - RICHTIGEN SIE UNS BITTE UNVERZUEGLICH MITTELS EMAIL UND LOESCHEN SIE DIESE NACHRICHT AUS IHREM SYSTEM. THIS EMAIL IS CONFIDENTIAL AND MAY ALSO BE LEGALLY PRIVILEGED. IF YOU ARE NOT THE INTENDED RECIPIENT, PLEASE NOTIFY US IMMEDIATELY BY EMAIL AND THEN DELETE THIS MESSAGE FROM YOUR SYSTEM. ____________________________________________________________________________ _________

13 years, 9 months

road trip from Champaign, IL to Denver, CO and back

by useddec＠gmail.com

One of my sons will be driving to the Denver area next week and will have a limited amount of space and time to drop things off if I have anything you might need. Also, If you have some DEC items, I might be interested in working out a trade. Please contact me off list. Thanks, Paul

13 years, 9 months

Vintage IC and INMOS transputer parts for sale in Vancouver, WA

by tosteve＠yahoo.com

Hello, Buddy in Vancouver WA has stuff to sell, contact him for more info: ===================================================================== Buddy says: I have some vintage ICs that I am trying to sale. Some of them are INMOS transputer boards and documents. Buddy Woodberry buddy-l at qwest.net Vancouver WA ===================================================================== I posted his pictures here: http://oldcomputers.net/temp/pic1.jpg http://oldcomputers.net/temp/pic2.jpg http://oldcomputers.net/temp/pic3.jpg http://oldcomputers.net/temp/pic4.jpg http://oldcomputers.net/temp/pic5.jpg

13 years, 9 months

Sync on something other than green for the sake of all that is holy

by rampaginggreenhulk＠yahoo.com

omg how about tweaking the monitor

13 years, 9 months

Megahaul on July 4th

by iamcamiel＠gmail.com

Hi Guys, Today me and my brother (truck driving license, no interest in old iron) had the biggest haul of DEC stuff I ever had (ex-collector moving to a smaller apartment). I'm picking up a second load in a week or two. Pictures at http://www.flickr.com/photos/7816395 at N04/sets/72157630422540146/ A quick inventory: PDP stuff: - PDP 11/44 - PDP 11/84 - 3 x RL02 - Professional 325 - Professional 350 VAX stuff: - 12 x BA213/BA440 pedestal VAX systems (MV3400, VAX 4000/200,300,500A, ...) - 3 x R400X storage pedestal - 3 x R215F storage pedestal - 47 x pizzabox VAX systems (MV3100, VAXstation 4000, Infoserver 150, ...) - 22 x pizzabox storage expansion - 4 x lunchbox VAX systems (MV/VAXserver/VAXstation 2000) - 11 x lunchbox storage expansion MIPS stuff: - DECsystem 5400 (pedestal) - 2 x Personal DECstation 5000/25 - DECstation 2100 - DECstation 5000/133 - DECstation 5000/200 Alpha stuff: - 2 x DEC3000 Miscellaneous stuff: - VAXmate PC500 w/RCD31 expansion box - 2 x HSZ40 - 18 x StorageWorks BA350 - 6 x StorageWorks BA353 - DECNIS 600 w/ DNSAN, DNSAM,W614/618,L602 - 5 x DECserver 700 - 3 x DECserver 200/MC - LANbridge 200 - Lots of DEChub stuff - Lots of manuals, cables, spare cards, spare disks, etc... I need to remind people not to send any more donations for the next few months while I sort this stuff out. I won't keep it all, so I'll probably post some messages here in the next few months to sell or give away some of it. Some of it may have to end up in the bin eventually (like storage expansion boxes with broken drives) Does anyone here have any experience with the Professional systems and the VAXmate? I believe the latter is an 8086 system, is that correct? Would the DECNIS stuff still be of use to anyone? Cheers, Camiel

13 years, 9 months

Names

by cclist＠sydex.com

Chris, thank you for respecting my wishes. --Chuck

13 years, 9 months

apologies to Chuck G.

by rampaginggreenhulk＠yahoo.com

denigration was nowhere in my thinking when I uttered the unspoken term. In fact I think there's a person on one of these forums that adopted the nickname Chuckster. But in any event it won't happen again.

13 years, 9 months

Cable ID?

by saquinn624＠aol.com

I have two cables that I've been trying to figure out what they're for. They're both commercial, with molded-in ends. The one that I've gotten furthest on is a video/keyboard cable of some sort, 8-ft long, DA-15F on one end with a box on the other end splitting out into what appears to be PS/2 keyboard and mouse ports (Mini-DIN 6, labelled "KBD" and "MOUSE") and 3BNC R/G/B video connectors. If it was LK-style I'd think DEC, as it is I was thinking X-Terminal, but all the X-terminal pictures I've seen have local keyboard ports and more "ordinary" graphics connectors. There is a part number, 012-1369-00, that when Googled comes up as Tektronix 4200/4300 workstation, but again those don't seem to have the right ports. No manufacturer name. Second has no markings. 9-ft 13W3F to 13W3M, which seems simple enough, but the signals are put through two separate cables and the RGBS portion is broken in the middle and there are two sets of BNC M connectors on them. Other pins are wired straight through. Perhaps connects to some sort of splitter?

13 years, 9 months

Cattle Call for extras for Jobs Movie

by jws＠jwsss.com

link here http://www.beinamovie.com/movie.php?mtitleid=115 for Monday and Tuesday 7/16 and 7/17 in Pasadena. I didn't send earlier notes for this movie, but figured that this note would be of slight interest to anyone who could make it. The scenes we're part of will be the 1983 PC Conference (Monday the 16th) and the 1977 Computer Jobs Faire (Tuesday the 17th) Maybe some here were at those conferences, and won't barf at the thought of being in a movie about Jobs. Jim

13 years, 9 months

For Sale: DEC W021B cables and RS11 Disk Drive Write Lockout Panel

by rickb＠bensene.com

Hello, all, I have four DEC W021B cables with FlipChip paddles at both ends. The cables are roughly 8 feet long including the paddle boards at both ends. The cables are nine coaxial (signal and ground) cables bonded together into a single flat black cable. The paddle fingers are gold plated, have light surface corrosion on them, and have light signs of insertion/removal from backplane sockets. Each W021B cable has nine signal lines, each with a separate ground. These cables were originally used to connect and RF11 Unibus Disk Controller chassis to an RS11 disk drive based on labels on the paddle boards. The same cables were used to connect peripherals (such as DF32 or RF08/RS08 disk) to the original Flip-Chip based PDP-8 processors (Straight 8, 8I and 8L). The cables are untested. I also have a single RS11 disk drive "Write Lockout" switch panel with cable and paddle connector for connecting it to an RS11 disk drive backplane. This panel provides sixteen toggle switches that can be set to provide write protection for sixteen separate blocks of 16K words on the disk. The panel has a flexible ribbon cable that is about 12 inches long that connects to a Flip Chip paddle connector with a white handle with designation of W033. The switch panel itself is in very good condition, with very clear legends with no dings or dents. The ribbon cable has some slight delamination in some areas, and one trace may not have electrical continuity based on a visual observation. The W033 paddle connector is in very good condition, with virtually no sign that it has ever been plugged into a Flip Chip slot. All of the very high quality switches move freely, and are original switches from the era, with no sign of replacement. The unit is untested. I would like to sell these items. Please read carefully below the "rules" before bidding. Sorry they are so detailed, but I want to make sure that the rules are clearly understood by all. I am accepting offers for each individual item on a per unit basis. For example, bids will be accepted for each of the W021B cables and the RS11 Write Lockout panel assembly separately. Bids must be sent in individual Emails, e.g., do not send a bid giving an offer for all four W021B cables, or one cable and the RS11 write lockout panel. Such bids will be dismissed without notice. Bidders need to send separate Emails with bids for each of the individual items of interest. The items will sell to the highest offer received via Email to me (i-t-e-m-s *at* b-e-n-s-e-n-e *dot* c-o-m [no dashes and substitute correct symbols for *at* and *dot*]) for each item by 11:59 PM Pacific Daylight Time on Sunday 22-July. Bids received at Email addresses other than that listed above will be dismissed without notice. Duplicate bid amounts for an item will be arbitrated by the first Email received in my inbox prior to the deadline. A flat rate charge of $15 will be paid by the winning bidder for packing/shipping unless arranged otherwise. Once the high bidder is determined, they will be notified by return Email on Monday 23-July. Payment shall only be accepted by PayPal, and must be paid in full including shipping within two business days once final costs notification is sent to the winner. If a winner does not respond to notification Emails within the deadline, backs out or fails to pay, the sale is considered to have failed, and the item will not be awarded to lower bidders. If an individual provides the high bid on multiple items, packing/shipping can be combined to minimize costs. Shipping will be done by USPS Flat Rate Priority Mail unless arranged otherwise. Items will ONLY be shipped to continental US locations. I will not ship overseas, or to Alaska, Hawaii, Mexico, or Canada. If you are not from the continental US, please do not bid. Photos of items can be Emailed upon request. Sales shall be final with no returns. If no high bids are received, the items will be auctioned on eBay. I wanted to give the Classic Computer mailing list members first opportunity to acquire these unusual vintage items. Please don't hesitate to write if you have questions about the items. I will do my best to respond promptly. Rick Bensene

13 years, 9 months

totally free - Sperry Portable MS-DOS 2.11 + GW BASIC manual and slipcover

by rampaginggreenhulk＠yahoo.com

Good shape. Send me your address.

13 years, 9 months

need specifics on Siemens HB2183L monitor

by rampaginggreenhulk＠yahoo.com

scan rates primarily. Donkashane!

13 years, 9 months

URL for original EMACS macros in TECO?

by legalize＠xmission.com

Anyone got one? I'm curious to look at it. According to <http://www.xemacs.org/Documentation/21.5/html/internals_3.html>, it was a merger of TECMACS and TMACS. -- "The Direct3D Graphics Pipeline" free book <http://tinyurl.com/d3d-pipeline> The Computer Graphics Museum <http://computergraphicsmuseum.org> The Terminals Wiki <http://terminals.classiccmp.org> Legalize Adulthood! (my blog) <http://legalizeadulthood.wordpress.com>

13 years, 9 months

cctalk Digest, Vol 107, Issue 35

by bqt＠update.uu.se

On 2012-07-14 16:04, cctalk-request at classiccmp.org wrote: > Message: 26 > Date: Sat, 14 Jul 2012 09:31:41 -0400 > From: Rick Murphy<rick at rickmurphy.net> > To:cctalk at classiccmp.org > Subject: Re: OS/8 dates (was TECO ^B on OS/8 and RT-11) > Message-ID:<201207141331.q6EDVgHs011761 at rickmurphy.net> > Content-Type: text/plain; charset="us-ascii"; format=flowed > > At 05:17 AM 7/13/2012, Johnny Billquist wrote: >> >Ooo. So TECO-8 actually lie in their documentation... Even worse. >> >A year in the range 1986-1994 would just have looked like 1970-1977. >> >That's ugly of them. > You're quite correct. Clearly this*is* a TECO-8 bug - I thought it was > at least following the docs but they're just ignoring the high-order > date bit. Unfortunately, fixing this (as in making it compliant with > the documentation) isn't easy as that page is full. And "fixing" it > would just give different wrong values since you can't squash 14 bits > into 13. > > Mea culpa. TECO Fail, indeed. Yeah... I tried to figure out a fix to atleast do what the doc says, but I end up using one more word than the current code. :-( Hmm, possibly I can get away with it, if there is a free location, or a constant 0060 on the current page, or page zero already, and the link is already clear at entrance of the routine... But it's hacky. Johnny -- Johnny Billquist || "I'm on a bus || on a psychedelic trip email: bqt at softjar.se || Reading murder books pdp is alive! || tryin' to stay hip" - B. Idol

13 years, 9 months

who is the resident Burroughs terminal expert??

by rampaginggreenhulk＠yahoo.com

I have a guy wanting to sell me an old airport terminal. Oi. Anyone want to peruse the pictures? I'll send them out if you're interested.

13 years, 9 months

A few 85xx uploads

by aek＠bitsavers.org

under http://bitsavers.org/bits/Tektronix Changed 856x to 8560 and created 8550 and 8562 directories There is an untested DOS/50 boot disk image under 8550 It's probably OK. The files extracted correctly on the 8562 Under 8562: The boot block for the 8562 (which appears to be different from the one on the V2 update floppy from the 8560) and a small program to create an IMD file with a payload >from stdin, so you can, for example, make a floppy with a tarball that can be read on /dev/rfd0 on the 8562. Curiously, Tek didn't include dd with Tnix, so I'm going to tar over the source and stock V7 dd binary to see if an unmodified binary will run, and if not, compile it over there. I'm a little nervous that the 8562 stanalone utilities disk may be needed to restore the disk instead of the one from the 8560, since the boot doesn't work quite the same way (the 8562 reads /boot from the disk, while the 8560 just loads 'tnix')

13 years, 9 months

Altair 8800 Kit - Paging Grant Stockly

by lists＠loomcom.com

Has anyone heard from Grant Stockly recently? The Altair Kit forums have fallen into the hands of spammers, and I haven't been able to reach him through email. He announced a new sale of kits in early June, but I didn't find out about it until last week. I was hoping to get in on it. -Seth

13 years, 9 months

Sync on something other than green for the sake of all that is holy

by spectre＠floodgap.com

Over the weekend, having gotten a beautiful, perfectly circular round tuit, I cracked the root password on my SGI Indy (tip of the hat to Doc Shipley) and got the system fully operational. It's a little poky, so I suppose the next thing is to upgrade the CPU module and get a 24-bit video card in it (8-bit is yugly). However, in the meantime, I'm using a cheapo 13w3 to VGA converter that works okay with my NEC monitor, but there is still a sync signal on the green line, leaving me with a persistent green tint. Reducing green gamma in IRIX helps some, but I'd like to get my black back (because once you go black, well, you know). What are people using to turn SOG into a more conventional sync signal an off-the-shelf multisync monitor like my NEC XV15+ VGA display will accept? -- ------------------------------------ personal: http://www.cameronkaiser.com/ -- Cameron Kaiser * Floodgap Systems * www.floodgap.com * ckaiser at floodgap.com -- Diamonds are forever. ------------------------------------------------------

13 years, 9 months

HP diode 1901-0884 HP 2113 PSU

by hp-fix＠xs4all.nl

Does somebody knows what I can use as replacement ? One of the 5V rectifier diodes from my HP 2113 PSU (HP 5061-3476) died, and I can't find the equivalent part number for it. -Rik

13 years, 9 months

Dilog DQ153

by elson＠pico-systems.com

Date: Sun, 15 Jul 2012 13:23:38 +0200 From: Camiel Vanderhoeven <iamcamiel at gmail.com> To: "General Discussion: On-Topic and Off-Topic Posts" <cctalk at classiccmp.org>, "General Discussion: On-Topic Posts Only" <cctech at classiccmp.org> Subject: Dilog and ACT UNIBUS module identification Message-ID: <CA+0-H5QfbaQUMRa8zK7N91Bft+NVJqkZhD6y+kCARnC2NjPkKg at mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1 I can't find anything on these two UNIBUS modules: - ACT 10197-0 - DILOG 153078 I believe a Dilog DQ153 is a Pertec-formatted mag tape controller. I used one in my system. The label you are reading is probably the blank board part #, there should be a silkscreen label on the front of the board. Jon

13 years, 9 months

Needed : idle line motor controller

by nico＠farumdata.dk

... for one of the Teletype ASR33's in the danish IT museum I'm located in Denmark (obviously!) where we use 220VAC. However, the TTY runs off an 220/117V transformer, so there should not be any problems building the controller into the stand Thanks Nico -- I am using the free version of SPAMfighter. SPAMfighter has removed 415 of my spam emails to date. Get the free SPAMfighter here: http://www.spamfighter.com/len Do you have a slow PC? Try Free scan http://www.spamfighter.com/SLOW-PCfighter?cid=sigen

13 years, 9 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb