test-drb

test-drb@ccmp.vtda.org

101090 discussions

What's wrong with the classiccmp list server?

by gunther＠aurora.regenstrief.org

since about 1 or 2 weeks classiccmp seems to silently discard my postings without any error. What's wrong? Am I the only one who has that problem? thanks -Gunther -- Gunther Schadow, M.D., Ph.D. gschadow(a)regenstrief.org Medical Information Scientist Regenstrief Institute for Health Care Adjunct Assistant Professor Indiana University School of Medicine tel:1(317)630-7960 http://aurora.regenstrief.org

24 years

MicroVAX-I VMS support?

by ajp166＠bellatlantic.net

4.7 should be doable, 5.x not likely. The biggest problem with MV-1s I've seen is it's hard to get enough memory in them. I'd say for 5.0 4mb is really running too close to the bone. Allison -----Original Message----- From: Dave McGuire <mcguire(a)neurotica.com> To: classiccmp(a)classiccmp.org <classiccmp(a)classiccmp.org> Date: Sunday, April 14, 2002 2:16 AM Subject: MicroVAX-I VMS support? > > Can anyone tell me the latest release of VMS that will run on a >MicroVAX-I? The last one I ran had 4.5 on it, but I'd like to run at >least 4.7 or 5.x. > > Thanks, > -Dave > >-- >Dave McGuire "Hush and eat your vegetables, young lady!" >St. Petersburg, FL - Mr. Bill >

24 years

Canon FV-540 Still Video Floppy Disk Drive on eBay

by jfoust＠threedee.com

I put this circa-1991 item on eBay, it looks like it's going to end at less than $10. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=1345799733 I'm auctioning a batch of other computer-related items, but this was the most classic or obscure. - John Canon FV-540 Still Video Floppy Disk Drive This was used with the Canon RC-540 Still Video Camera, an early digital camera dating back to 1991. It was part of Canon's Professional Still Video Imaging Kit, a $4900 package. It stored images to a 2" inch floppy disk, and you'd move those floppies to this SCSI device to view thumbnails and retrieve images using Canon's SV-Scan software or other packages. Each could store up to 50 images at low resolution (72 DPI) or up to 32 images at high resolution (150 DPI). I will include a Zip file (Wfvscan2.zip) containing Windows FV-Scan software, which requires a Corel or Trantor SCSI card interface. I haven't tested it. I think there was Mac and even Next software available for this unit. Perhaps you can find it on the net. The box has S-Video in, and composite in and out, and two SCSI ports.

24 years

MicroVAX-I VMS support?

by mcguire＠neurotica.com

Can anyone tell me the latest release of VMS that will run on a MicroVAX-I? The last one I ran had 4.5 on it, but I'd like to run at least 4.7 or 5.x. Thanks, -Dave -- Dave McGuire "Hush and eat your vegetables, young lady!" St. Petersburg, FL - Mr. Bill

24 years

Central Point Option Board

by nemesis-lists＠icequake.net

Hello, I've begun to prepare a site with a wealth of Option Board information. Hopefully, the end result will be that any person with an Option Board and no docu/software will be able to use it productively. http://dbz.icequake.net/oldskool/dob/ I would appreciate any comments, criticism, flames, corrections, information, whatever. 8) -- Ryan Underwood, <nemesis at icequake.net>, icq=10317253 jabber=nemesis at jabber.icequake.net http://www.icequake.net/~nemesis |= icequake networks, ltd. =|= university of missouri rolla =| |= system administration =|= computer science =|

24 years

my little idea...

by john_boffemmyer_iv＠boff-net.dhs.org

Well, from the overwhelming response already, it seems like a good one =) Now for an important issue: I have no real clue of electronics pathways, circuity (board level repairs), soldering, etc. nor am I knowledgeable of electrical currents, signalling or anything else necessary. I have quickly realized this. If I paid money is some form or means, would it be possible for someone to actually set this up in a provided 5.25" or 3.5" bay blank? I am fully willing to pay for components, shipping and labor. The concept is thus: 2 LED's for SCSI controller I/O, 2 LED's for Ethernet and 4 LED's for SCSI drives. Was hoping for SCSI LED's to be orange, Ethernet to be yellow and SCSI drives to be possibly blue. I would have to assume that even the blue LED's can be obtained reasonably from somewhere to make this work. Again, I am ignorant of electrical work and this is why I ask for help. The SCSI controller is an LSI Logic 22910, the Ethernet controller is an IBM PCI Ethernet adapter (AMD PC-Net II) and I think the SCSI drives for front panel LED's are pretty standard. I DO HAVE THE SHEETS ON ALL OF THESE. Anyone interested? Please email me in private: john_boffemmyer_iv(a)boff-net.dhs.org I am a computer technician and network troubleshooter. I am in NO way a rocket scientist or experienced avid hobbiest like some of my brethren here. Many of you have this knowledge and experience, please help if you can. ...BTW Doc, yes, I really do have too much time on my hands sometimes... when I am not commuting 2 hours each way to work and putting in 42hr+ work weeks. The weekends become a lull and boredom sinks in... that is when my damned mind rears it's ugly head and starts thinking (I hate when it does that). Thanks gang, John ---------------------------------------- Founder, Lead Writer, Tech Analyst and Web Designer Boff-Net Technologies http://boff-net.dhs.org/index.html ---------------------------------------

24 years

test, disregard please

by gunther＠aurora.regenstrief.org

sorry, classiccmp stopped forwarding my messages. I just resubscribed and this is a probe to see if it works now.

24 years

Ready for another junk ^H^H^H^H er,ah, computer feast? (Central Florida)

by mcguire＠neurotica.com

On April 11, Joe wrote: > I just talked to Eric Smith and he's going to be visiting this area (Orlando) around May 17 or 18. I thought it might be a good time for another Junk Feast. Let me know if you're interested. Hey! Yes!! :-) I missed the last one because I hadn't moved down here yet...but now I'm just a little ways away in St. Petersburg. Barring any catastrophe, count me in! -Dave -- Dave McGuire "Hush and eat your vegetables, young lady!" St. Petersburg, FL - Mr. Bill

24 years

HSC90: who knows what K.ci status 111 means?

by gunther＠aurora.regenstrief.org

Hi, few days ago I moved my HSC90 into the basement and today I changed the power-plug to a 4-prong household kind, plugged it in and it actually powered up. I could even boot it from the RX33 disk that had been sitting for years on a scrap yard. All good news. But seems like I have a serious error in the CI "host adapter" and the HSC User Manual doesn't say anything about it. the K.ci fails DIT with status 111. SHOW ALL says that K.ci was not detected. The three boards show the follwing lights: | R | R R 1 2 3 where "R" marks a red LED and | marks a row of yellow LEDs. Notably the green LEDs underneath the red ones don't come on whereas they do come on on all the SI interfaces. Knowing that the CI is finnicky with unterminated ports I did connect all four to the star coupler. But it didn't change the error. Are my cards broken? I hope there's some other oversight that can be uncovered with the deciphering of the status 111. Thanks, -Gunther -- Gunther Schadow, M.D., Ph.D. gschadow(a)regenstrief.org Medical Information Scientist Regenstrief Institute for Health Care Adjunct Assistant Professor Indiana University School of Medicine tel:1(317)630-7960 http://aurora.regenstrief.org

24 years

TTL computing

by Lee.Davison＠merlincommunications.com

> Are you saying that a program in a mask programmed ROM is > not firmware? Because everybody else that I know would call it > that. > There are many who would disagree with them, Tony. One characteristic common to all definitions I've run into in firmware is that it's FIELD-Programmable. Another is that it's non-volatile, i.e. persists between power cycles. Richard, you seem to be forgetting all those adverts from the 70s and 80s that boasted "Firmware in ROM!". Also a quick look at a dictionary reveals ... 8^)= --------------------------------------------- firm?ware Pronunciation Key (f?rm w?r ) n. Computer programming instructions that are stored in a read-only memory unit rather than being implemented through software. Source: The American Heritage? Dictionary of the English Language, Fourth Edition Copyright ? 2000 by Houghton Mifflin Company. --------------------------------------------- firmware n : (computer science) coded instructions that are stored permanently in read-only memory. Source: WordNet ? 1.6, ? 1997 Princeton University --------------------------------------------- firmware Software stored in read-only memory (ROM) or programmable ROM (PROM). Easier to change than hardware but harder than software stored on disk. Firmware is often responsible for the behaviour of a system when it is first switched on. A typical example would be a "monitor" program in a microcomputer which loads the full operating system from disk or from a network and then passes control to it. Source: The Free On-line Dictionary of Computing, ? 1993-2001 Denis Howe --------------------------------------------- Lee. ---------------------------------------------------------------------------- ---- This email is intended only for the above named addressee(s). The information contained in this email may contain information which is confidential. The views expressed in this email are personal to the sender and do not in any way reflect the views of the company. If you have received this email and you are not a named addressee please delete it from your system and contact Merlin Communications International IT Department on +44 20 7344 5888. ________________________________________________________________________ This e-mail has been scanned for all viruses by Star Internet. The service is powered by MessageLabs. For more information on a proactive anti-virus service working around the clock, around the globe, visit: http://www.star.net.uk ________________________________________________________________________

24 years

Fw: Help on two new finds

by jrkeys＠concentric.net

----- Original Message ----- From: "John R. Keys Jr." <jrkeys(a)concentric.net> To: <classiccmp(a)classiccmp.org> Sent: Friday, April 12, 2002 8:13 PM Subject: Help on two new finds > Today I found a Black IBM external 8 inch drive at a Goodwill here for > $12.99. I checked google and could not find any real good info on it. > IBM's site was not much help either since this unit is from 1995. Anyone > have in details on it, I would like to hook it up to the AS/400 I got > the other day. > > Down at my warehouse while looking for some manuals I came across a box > that was addressed to someone in MN. I opened it and found a strange > looking keyboard/computer. It's black with gold stripes and says on the > front "System Logic / KBD-1 SYNERGISTIC DESIGN INC." . This is a > strange looking machine, the key caps are white clued on paper using > black and red print. Anyone have one of these along with a manual or > any information on it? Thanks in advance John >

24 years

list server computer hardware will change

by jwest＠classiccmp.org

Greetings; FYI - at some point in the not too distant future (read weeks) I want to move the classiccmp list onto a different machine (but same location). This isn't being done for cpu/memory load or bandwidth reasons, it's mainly for logistical reasons. So - one machine will be dedicated to handling all classiccmp list traffic and that is all it will do. Right now the machine the list is on is also one of several doing backup DNS and mail for the ISP. Once the classiccmp stuff is moved it will also be shadowed by some of our other servers, but the primary server will be dedicated to classiccmp. I am perfectly willing to subsidize the entire cost of the hardware for the new machine. However, I am also willing to accept any donations of cash or hardware to cover the cost. I will host the machine and maintain it always for free, but the initial hardware would be nice to get some help with (although not required!). Here are the components and costs. If anyone has any of the components to spare and is willing to donate them, great - or if you want to kick in some cash to defray the cost - great too. But whatever people don't cover, I'm willing to cover myself even if it is the entire amount. ASUS micro-ATX motherboard with built in video and network interface: $65.00 Intel celeron 1.2ghz $80 Teac Floppy: $10 IDE CD-ROM: $30 256mb RAM: $80 30gb ultra IDE hard drive: $0 (I already have this sitting around, but a 2nd to mirror might be nice) 1U rackmount chassis: $150 In order to address the previously discussed issues of [offlist] tags and html rejection, as well as because of a lot of other nifty features, I'm also considering using mailman. It gives a wonderfull web interface for those that want to do their subscribes/unsubscribes & the like on their own. Yes, it still supports email subscribtion requestions. Basically, it gives me a lot of flexibility and options that majordomo doesn't. Not sure about this all yet. Thanks! Jay West

24 years

Paper tape encoding scheme needed

by mranalog＠attbi.com

Bill Richman wrote: >... > while having the reader software ignore them, I'd like to follow some > kind of established standard. Can anyone give me any pointers on > this? Since DATA I/O makes a paper tape reader to connect to some of their PROM programmers, there a great description of various paper tape and data formats included in their PROM programmer manuals. http://www.spies.com/arcade/TE/DataIO29A.pdf See Appendix A Regards, --Doug ========================================= Doug Coward @ home in Poulsbo, WA Analog Computer Online Museum and History Center http://dcoward.best.vwh.net/analog Analogrechner, calculateur analogique, calcolatore analogico, analoogrekenaar, komputer analogowy, analog bilgisayar, kampiutere ghiyasi, analoge computer. =========================================

24 years

Free TK50 cartridges

by lists＠subatomix.com

I have a line on "at least 32 tk-50 tape cartridges" for free in (I think) Ohio. If you want these, follow the sig instructions and mail me. I may then put you in contact with the owner. -- Jeffrey Sharp The email address lists(a)subatomix.com is for mailing list traffic. Please send off-list mail to roach jay ess ess at wasp subatomix beetle dot com. You may need to remove some bugs first.

24 years

classiccmp hardware status...

by jwest＠classiccmp.org

So far, cash ($35) has been donated as well as the following hardware... 256mb RAM 32X IDE CDROM 1.44mb floppy drive Quite a few people have asked if I can take the donations via paypal... so my paypal id is jwest(a)classiccmp.org It is a personal paypal account, so as I understand it, you can send donations if you have a verified paypal bank account. They have to come from a bank account, not a credit card. Also - I don't wish to have extra cash left over from any donations. So I'll probably work out something where if there is cash left over, the extra amount is divided up among the people who donated based on their percentage of donation and send them cash back. Or it could be kept in case hardware fails, but I really don't want to go down that route. In any case, once the hardware is all purchased and covered, I will post an accounting of each amount or hardware donated so everyone knows it's all above-board so to speak. My sincere thanks! Jay West

24 years

Amiga haul in Topeka

by ghldbrd＠ccp.com

I made contact with an employee of Kansas Computer Recycling Corp. in Topeka. The conversation drifted to my favorite subject, and he said they had a bunch of cards for Amigas, including what he thought was a toaster . . . . Well they did have them. I went home with 15 Toaster cards, 5 Flyer cards, 18 Ethernet cards (extremely rare and pricey), 4 68040 accerator cards, and a plethora of other goodies. I will have extras of the above for sale, once I chip through them and see what's working and not. This has to be the <<<<BEST>>>>> Amiga find in all the years I've played with them. Also at KCRC in Topeka, I saw a Sun SPARQ in the scrap pile out back, so they occasionally get the higher grade stuff. Check out www.kansascrc.com or e-mail kansascrc(a)go.com. Gerald & Lynne Hartman are the owners, and they dismantle mostly later PC stuff and pitch the old/odd stuff out the back door. Gary Hildebrand ST. JOseph, MO

24 years

Free MV3100/80 & Misc (Melbourne, .au)

by mrbill＠mrbill.net

Please contact Darren directly if interested in this system; he would like it to go to a good home. Bill ----- Forwarded message from Darren Harrison <harrojnr(a)ozemail.com.au> ----- From: "Darren Harrison" <harrojnr(a)ozemail.com.au> To: "Bill Bradford" <mrbill(a)mrbill.net> Subject: Re: vax micro computer Date: Wed, 10 Apr 2002 10:54:31 +1000 Thanks Bill, It is a Digital MicroVAX 3100-80 with a storage expansion. Both are SCSI compatible and the storage expansion also has a 9 track port. VAX 3100-80 Model No. -470ZM-B9-A01 SN - KA236W6545 Storage expansion Model No. - SZ12J-JA SN - AB23403IHO I did notice you were in Austin, TX. The VAX and I are in Melbourne, Australia. Hope this doesn't cause any problems. Thanks again, Darren Harrison Urban Science, harrojnr(a)ozemail.com.au ----- Original Message ----- -- Bill Bradford mrbill(a)mrbill.net Austin, TX

24 years

Free MV3100/80 & Misc (Melbourne, .au)

by Antonio.Carlini＠riverstonenet.com

> Christopher Smith wrote: > >There's also an alternate alternate procedure that would involve not >running sys$system:startup.com or whatever, and just trying to run >"authorize," installing the proper images until it stops complaining >about not having them ;) I suppose if you are a masochist, yes :-) The original poster seems to have missed the required $ SET NOON That should be the first thing you type, without that the first error bombs you out and you get to boot all over again ... It looks like he just didn't know that at the Username: prompt, if you have managed to boot with SYSUAFALT (and the startup files don't plug this hole! ... which is the reason for the long-winded crack anyway) then as long as it's the console and as long as you enter SYSTEM you just need to hit RETURN (well anything really) for both the password prompts and you are in. Copious details at: http://www.openvms.compaq.com/wizard/openvms_faq.html and plenty of docs at http://www.openvms.compaq.com:8000/ (OpenVMS User's manual is probably a good one to start with). Be nice to see that list of docs ... Antonio

24 years

Amiga Toaster was re: Amiga haul in Topeka

by ghldbrd＠ccp.com

I contacted a local (Kansaas City) amigaphile and Toaster technician, and he gave me the lowdown on hardware requirements for the Toaster and Toaster Flyer systems. The Toaster 2000 and Toaster 4000 cards are different, and require different software to operate. The physical difference is that the 4000 card was made a bit shorter so it would easily fit in the standard slot on an A3000 or A4000 desktop. The A2000 card was in its own dedicated video card slot, and wasn't limited in lengh. I'm getting the software from him, and we're setting up a test machine to do a go/no go test on these cards. He also does componenet level repairs on motherboards, etc. for most Amigas, if anyone is interested. Of course that is limited by parts availability. Gary Hildebrand ST. Joseph, MO

24 years

Does Anyone Have A

by acme_ent＠bellsouth.net

> From: Sellam Ismail <foo(a)siconic.com> > I concede I am not only both silly and lazy, but somewhat disturbed (and > somewhat disturbing as well). God-oh-mighty. Sellam, what's this? Honesty and personal disclosure all in one post? What could be next? Kindness? Dude! Glen 0/0

24 years

Amiga Toaster was re: Amiga haul in Topeka

by Innfogra＠aol.com

Hi; I am interested in one of your Toaster 2000 cards when you get around to deciding what you are willing to part with. I have been keeping a 2000 around for years. Thanks for the info too. I like the history. Paxton Astoria, OR

24 years

Anyone Care About RT-11

by csmith＠amdocs.com

> -----Original Message----- > From: Jerome H. Fine [mailto:jhfinepw4z@compsys.to] > As for the first bug I want to put on the list, MACRO-11 does > not conform to the ISO standard since it uses ONLY 2 digit There's an ISO MACRO-11? :) Chris Christopher Smith, Perl Developer Amdocs - Champaign, IL /usr/bin/perl -e ' print((~"\x95\xc4\xe3"^"Just Another Perl Hacker.")."\x08!\n"); '

24 years

The CommodoreOne is near!

by bpope＠wordstock.com

To all who may be interested, The "CommodoreOne" is nearing completion. Check out http://www.commodoreone.com for a picture of the partially assembled motherboard! :) (Click on news) If that site is down, go to http://www.geocities.com/profdredd/ and click on "CommodoreOne Details" for a bigger picture with important features pointed out. Cheers, Bryan

24 years

Digital Printronix P300? for sale

by doc＠mdrconsult.com

Anybody need a small, lightweight, fast line printer? If so, delete this post. :) We got in 2 printers yesterday that are DEC badged on front, but the only other info I can find is a Printronix label on the pedestal designating it a P300. I guess Printronix built printers for DEC? Anyway, they are pristine. I haven't unwrapped the pallets they're on, but judging by the condition of the computer that drove them, I'll bet even the ribbon is good. They're available for sale, not by me. If you need one and are willing to arrange shipping, contact me off list. Doc

24 years

Documation D150 card reader

by vcf＠siconic.com

I have a Documation D150 card reader that I am trying to make operational. I fired it up today and ran a card through, only to have a big black streak get "printed" to the card. I thought this was odd, so I opened it up and found several problems. The black streak was caused by the roller that pulls the card through the slot. It's basically melted into a gooey ink-like mess. Actually, only one side of it has melted. The other side is mostly intact, so I may be able to just eliminate the melted side and still use this roller. It looks like this: __ __ | \/ | ==| |== <-- spindle |__/\__| ^- one side melted Then there is a rubber gasket that was around a disc that was situated perpendicular to the way the card slides through. This roller dried up and crumbled into several different pieces. ^ card goes in this way ---> and the rubber disk spun this way | | I think the purpose of this roller was to push the card against the guide so that it goes through the reader straight. Then there are two toothed belts driving cams from motors. One of them got completely obliterated. The radial threads inside the belt got wrapped around the drive cam and left a gooey residue on it. The other belt is still in tact but very gooey, and is probably going to go at some point as well. I was able to get this code off of it: SDP 6R6-055018C I did a Google search but didn't turn anything up on this reader. Does anyone know of a source to get replacement belts and parts for this reader? -- Sellam Ismail Vintage Computer Festival ------------------------------------------------------------------------------ International Man of Intrigue and Danger http://www.vintage.org * Old computing resources for business and academia at www.VintageTech.com *

24 years

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb